一种加载铁氧体磁环的高功率宽带巴伦

针对高功率天线的差分馈电和阻抗匹配问题,文中提出了一种基于同轴线结构加载铁氧体磁环的宽 带巴伦模型。双同轴线具有阻抗变换功能和较好的功率承载能力,铁氧体磁环改善了巴伦在低频时的输入匹配和 两个输出端口不平衡度。仿真和实测表明,此巴伦在0. 05~1. 24 GHz 内回波损耗低于-10 dB,去除3. 0 dB 系统插损 后单端插入损耗在1. 5 dB 以内,两端输出的相位不平衡度在5°以内,幅度不平衡度在2%以内。通过分析巴伦的电 磁热损耗场、温度场和应力形变场,验证了巴伦在高功率馈电下的工作性能,结果表明此巴伦在工作频带内能够承 受500 W 的功率。     

Ku波段宽带高增益基片集成腔圆极化阵列天线北大核心CSCD

提出了一款应用于Ku波段的宽带高增益基片集成腔(Substrate Integrated Cavity,SIC)圆极化阵列天线。通过引入沿SIC口径面对角线放置的一对半月形寄生贴片和SIC底部馈电纵缝,使SIC中的TM_(211)和TM_(121)谐振模式幅值相等、相位相差90°,产生高增益圆极化辐射。同时,双寄生贴片还引入了一种背腔缝隙耦合振子圆极化辐射模式,扩宽了天线高增益圆极化辐射带宽。在此基础上,设计了一款2×2单元顺序旋转馈电的SIC圆极化阵列天线。阵列天线采用双层基片集成波导顺序相移馈电网络进行馈电,进一步增大了天线的圆极化带宽。综合考虑天线的-10 dB反射系数带宽、3 dB轴比带宽和3 dB增益带宽,测试结果表明,圆极化阵列天线的有效带宽为10.74-13.30 GHz(21.3%),在通带范围内最大增益为14.50 dBi。     

宽频带圆极化缝隙螺旋天线的设计

研究了一种宽阻抗带宽和宽圆极化轴比带宽的缝隙螺旋天线。天线印制在由FR4 介质基板构建的 方形柱状结构的内外表面,两组长短不同的缝隙螺旋臂印制在介质基板外表面并延伸至天线顶部;一条弯折的微带 线作为馈电网络印制在介质基板内表面,通过对各缝隙耦合馈电,实现天线宽阻抗带宽和轴比带宽。实测结果表 明:天线尺寸为0. 111λ0 ×0. 111λ0 ×0. 221λ0(λ0 为北斗B2 中心频率1. 207 GHz 对应的自由空间波长),S11 ≤ -10 dB 的阻抗带宽为1. 158~1. 778 GHz,轴比≤3 dB 的圆极化带宽为1. 133~1. 918 GHz。该天线采用缝隙螺旋结构,通过 简易的馈电网络实现天线小型化和宽频带特性,在卫星导航系统中具有较好的应用前景。     

ACO–EEOLSR: enhanced energy model based link stability routing protocol in mobile ad hoc networks

A mobile ad hoc network (MANET) has abundant mobile nodes that are free to communicate independently in many locations. Many existing energy models address the inadequacy of resources based on Ad hoc On-demand Multipath Distance Vector and Optimized Link State Protocol (OLSP) routing protocols for MANET along with various parameters. The architecture of energy-efficient routing mechanisms is a challenging problem in a MANET. In this work, a novel energy-aware routing model is introduced for MANET comprising an ant colony optimization (ACO) enhanced approach to energy-efficient-optimized link state routing (named ACO–EEOLSR). Initially, the route discovery is progressed by means of neighbor estimation and also with the authentication of link stability. Parameters such as energy, distance, and hop count are employed as willingness nodes, where both the energy and distance are entrenched through the OLSP. Consequently, the hop count is applied via the ACO system that is beneficial for link stability. After the acceptance of an acknowledgement, the hop count is authorized for further performance analysis. This approach increases the Quality of Service and also uses less energy compared to other energy models. The accomplished simulation upshot depicts that the ACO–EEOLSR outperforms the EEOLSR scheme with respect to the performance metrics of energy consumption, packet delivery ratio, total remaining time, average network lifetime, and a variance of energy.     

Correction on link relative based approach to CUSUM chart

Link relative-based approach was used in an article (see reference 1) to enhance the performance of the cumulative sum (CUSUM) control chart. This technique involves the use of firstly, the link relative variable to convert the process observations in a relative to the mean form and secondly, optimal constants to define a new variable which is used as the plotting statistic of the link relative CUSUM chart. In this article, it is proven through simulation study that the optimal constants with fixed values, as reported in the aforementioned article, give different results. Instead, if the regression technique is used, then the same results will be obtained.     

自动测试系统中的仪器设备驱动通用封装研究

在目前的自动测试系统软件开发中,虚拟仪器设备指令的非通用性会导致系统开发繁琐、无法集成等问题,针对这些问题提出了一种适合大部分仪器设备的封装方法;这种封装方法,通过动态链接库的形式将事件处理机制嵌入到仪器驱动封装里,拥有跨平台、适用面广、开发速度快和仪器可互换等特点;经过在实际雷达射频模块自动测试系统项目中的应用,结果表明该方法能够实现跨平台操作、具有仪器互换和封装简便等特点,并且表现出极强的通用性,具有一定的实用性和推广价值.     

ACL在聚合端口上应用研究

访问控制列表在网络安全中是一种重要的手段。文章通过对其研究,提出了在聚合端口上应用ACL的方法,该方法可以大大减少网络管理人员配置ACL的复杂性。结合该方法,给出了一个网络安全模型的实例,通过端口聚合方案和制定安全策略,实现网络性能的优化和保护网络的目的。     

求解最小MPR集的蚁群算法与仿真

在分析利用贪心策略启发式算法求解最小MPR集的缺陷基础上,引入蚁群算法对最小MPR集进行求解.首先定义了节点及其出度和入度,并根据节点的出度和入度限制,给出了求解最小MPR集的蚁群算法.然后,对蚁群算法的3种模型Ant-Cycle、Ant-Quantity和Ant-Density加以改进,并对这3种改进模型的收敛性进行分析与实验.实验采用了圆形分布和理想均匀分布2种拓扑结构,前者实验结果表明Ant-Cycle模型的收敛速度较快,后者结果表明Ant-Cycle模型和Ant-Density模型各有优势.因此,最小MPR集的蚁群算法的模型选择需依据拓扑结构确定.最后,使用OPNET基于该算法对数据链的点对多点的点名呼叫工作方式进行模拟仿真,选择的统计量显示了节点的连通性和数据一致性,验证了该算法的合理性.     

交换机冗余链路引起的网络拥塞问题

网络中,冗余链路可以保障网络的高可用性,但它也会引起数据帧在网路中不停地兜圈,导致广播风暴、MAC地址表不稳定、重复帧等,从而引起网络拥塞。该文结合模拟实验探讨了交换机的工作原理及数据转发流程,及如何避免数据帧的兜圈引起网络拥塞,为网络设备的高可用性配置提供了实践指导。     

Experimental investigation and comparison of super‐wideband antipodal slot antennas

Three novel, super‐wideband antipodal slot antennas with different tuning stubs are studied and compared with each other. Smooth, half‐circular slot profile is used to improve the antennas' polarization purity and impedance bandwidth, and different tuning stubs are used to finely tune the antennas' radiation performance. As will be reported, low crosspolarization level, stable dipole‐like pattern, and flat gain performances can be obtained within an operation bandwidth of 6.3:1 by introducing a smooth antipodal slot structure and a cup‐shape tuning patch. © 2011 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2011.