直缝焊管焊缝质量电磁超声检测方法研究

为实现直缝焊管焊缝内缺陷检测,采用周向电磁超声SH0导波检测技术,研究了基于磁致伸缩效应激励周向SH0模态导波,确定了周向SH0导波激励频率,设计了一款一发双收差分接收的直缝焊管焊缝缺陷检测探头。结果表明:该系统能够激发单一模态周向SH0导波,实际波速与模型分析结果吻合;针对直径116 mm、壁厚3.5 mm的激光直缝焊管焊缝的Φ0.6 mm盲孔和Φ1.0 mm通孔,通过差分探头的信号处理,能够实现焊缝处Φ1.0 mm通孔和Φ0.6 mm盲孔缺陷的检测。     

中国镁工业研究方向探讨

简单介绍了我国镁资源状况以及我国镁工业的发展历程和现状,分析了我国现有镁工业中存在的一些问题。在当前许多传统金属资源已面临枯竭之际,强调了加速发展镁工业的必要性。文章从镁冶炼工艺的研究和镁合金成形技术的研究两个方面对中国镁工业今后的研究方向进行了探讨,并指出真空碳热还原法炼镁等新工艺的开发研究和镁合金机械成形、超塑性成形、触变成形和流变成形等技术的开发研究是促进中国镁工业发展的关键。最后对中国的镁工业作了展望。     

提高超声波探伤轧辊裂纹深度的准确度的方法

运用正交试验法，找出了超声波探伤轧辊裂纹深度最佳参数组合，提高了超声波探伤的准确度。     

Thermal Shock Property of Al/Ni-ZrO_2 Gradient Thennal Barrier Coatings

THERMAL BARRIER COATINGS can holdbackintrusion of high temperature,high heat to increaseapplied temperature and life of substrate metal parts,and have been applied on heat position of rocket,satellite,aero engine and gas engine"31.But thermalstresses are produced during thermal shock due tomismatch of thermal properties between ceramiccoatings and substrate metal,therefore thermal shockproperties of coatings are very poor.Gradient thermalbarrier coatings make materials gradually chang…     

高炉泥炮双向液压锁系统的改进

介绍了石家庄钢铁有限责任公司炼铁厂高炉泥炮使用中出现的振动问题，通过分析高炉泥炮双向液压锁工作原理以及系统的改进，消除了高炉泥炮的振动。     

自由曲面数控加工走刀方向的优化研究

走刀方向对数控加工的效率有重要影响，尤其对于多曲面拼接自由曲面不规则轮廓区域的数控加工。针对现有自由曲面数控加工过程走刀方向优化研究存在的问题，提出了基于曲面数控加工区域划分的走刀方向优化策略，建立了简化的刀具轨迹计算模型和加工时间模型，并用实例加以验证，取得了满意的效果。     

金属液体凝固中直接挤压过程的数值模拟

根据稳定的交替方向隐式（ＳＡＤＩ）有限差分方法、上限元法（ＵＢＥＴ）等数值计算方法提出了一种数值模拟方法．使用这种方法成功地模拟了融凝固和大塑性变形为一体的金属液体凝固过程中直接挤压（简称液体挤压）的工艺过程．计算机生成的动画图象直观地表现了工件的整个成型过程．模拟结果有助于掌握液体挤压这一新工艺的各种工艺规律．     

可调向靠背式测速探头测向方法的实验验证及标定系数研究

为解决流场中速度、方向的测量问题，自行设计了一种新型的可调向靠背式测速探头，本文介绍了此测速探头的测向方法，通过实验验证了此方法的可行性，并对标定系数曲线进行了测试。     

模具型腔的几种精整加工方法的对比分析

通过对模具型腔工作面的几种精整加工方法的对比分析，研究和探讨如何提高模具型腔工作面质量的方法，并提出精整加工的发展方向。     

A new thermomechanical model of cutting applied to turning operations. Part I. Theory

In this paper, an analytical approach is used to model the thermomechanical process of chip formation in a turning operation. In order to study the effects of the cutting edge geometry, it is important to analyse its global and local effects such as the chip flow direction, the cutting forces and the temperature distribution at the rake face. To take into account the real cutting edge geometry, the engaged part in cutting of the rounded nose is decomposed into a set of cutting edge elements. Thus each elementary chip produced by a straight cutting edge element, is obtained from an oblique cutting process. The fact that the local chip flow is imposed by the global chip movement is accounted for by considering appropriate interactions between adjacent chip elements. Consequently, a modified version of the oblique cutting model of Moufki et al. [Int. J. Mech. Sci. 42 (2000) 1205; Int. J. Mach. Tools Manufact. 44 (9) (2004) 971] is developed and applied to each cutting edge element in order to obtain the cutting forces and the temperature distributions along the rake face. The material characteristics such as strain rate sensitivity, strain hardening and thermal softening, the thermomechanical coupling and the inertia effects are taken into account in the modelling. The model can be used to predict the cutting forces, the global chip flow direction, the surface contact between chip and tool and the temperature distribution at the rake face which affects strongly the tool wear. Part II of this work consists in a parametric study where the effects of cutting conditions, cutting edge geometry, and friction at the tool–chip interface are investigated. The tendencies predicted by the model are also compared qualitatively with the experimental trends founded in the literature.