纺牵—步法中粗旦丙纶长丝沸水收缩率初探

在纺牵联合一步法纺丝机上研究了丙纶切片的熔融指数对纤维沸水收缩率的影响，发现熔融指数高的切片，其纤维的沸水收缩率变化大。沸水收缩率随热定型的温度升高而下降。沸水收缩率可根据用户提供中心值（Ｍ）通过实验确定，一般以Ｍ±１．５为宜。     

A strengthened analysis of a local algorithm for the minimum dominating set problem in planar graphs

In recent years growing interest in local distributed algorithms has widely been observed. This results from their high resistance to errors and damage, as well as from their good performance, which is independent of the size of the network. A local deterministic distributed algorithm finding an approximation of a Minimum Dominating Set in planar graphs has been presented by Lenzen et al., and they proved that the algorithm returns a 130-approximation of the Minimum Dominating Set. In this article we will show that the algorithm is two times more effective than was previously assumed, and we prove that the algorithm by Lenzen et al. outputs a 52-approximation to a Minimum Dominating Set. Therefore the gap between the lower bound and the approximation ratio of the best yet local deterministic distributed algorithm is reduced by half.     

基于鲁棒一步集的Tube不变集鲁棒模型预测控制

针对一类干扰有界的输入和状态受约束线性离散系统,提出了一种基于鲁棒一步集的Tube不 变集鲁棒模型预测控制方法.首先采用多面体不变集离线设计方法得到基于多面体不变集序列的扩 展终端约束集;然后为了扩大鲁棒模型预测控制的初始状态允许区域,并提高系统的鲁棒性,在扩展终端约束集的基础上,通过引入鲁棒一步集并借助Tube不变集控制策略,设计了基于鲁棒一步集的鲁棒模型预测控制方法,并给出了算法的存在性和稳定性证明. 该方法不仅极大地扩大了初始状态允许区域,而且对有界干扰具有有效的抑制作用,使得受扰系统收敛到以原点为中心的最小鲁棒正不变集内.最后仿真验证了算法的有效性.     

Optimization of reactive SMB and Varicol systems

A comprehensive optimization study on a simulated moving bed reactor (SMBR) system is reported in this article for the direct synthesis of methyl tertiary butyl ether (MTBE) from tertiary butyl alcohol (TBA) and methanol. The applicability of the Varicol process, which is based on non-synchronous shift of the inlet and outlet ports, is explored for the first time for a reactive system. Multi-objective (two and three objective functions) optimization has been performed for both existing as well as design stage for SMBR and Varicol systems and their efficiencies are compared. The optimization problem involves relatively large number of decision variables; both continuous variables, such as flow rates in various sections and length of the columns and discrete variables, such as number of columns and column configuration. Pareto optimal solutions are obtained. It is observed that a five-column Varicol performs better than an equivalent five-column SMBR and its performance is nearly equal to that of a six-column SMBR in terms of purity and yield of MTBE and minimal eluent consumption. This is an important inference as it enables the reduction of fixed and operating costs while at the same time helps to achieve high purity and yield of the desired product and conversion of the limiting reactant. A state-of-the-art optimization technique, viz., non-dominated sorting genetic algorithm (NSGA), which allows handling of these complex optimization problems, is employed for this study. This is the first time that, not only the separating potential of Varicol has been extended to reaction systems, but also was optimized for multiple objectives.     

基于Pro／E参数化斜齿轮建模技术

应用Pro／E软件的参数化造型功能，不需要二次开发，直接创建渐开线斜齿圆柱齿轮模型，对直齿、人字齿齿轮的建模具有借鉴作用。     

A FUZZY MATCH BASED EXPERT SYSTEM FOR SYNTHESIS OF SEPARATION PROCESSES

A predictive parallel search algorithm,the fuzzy match inference strategy,is implemented ina prototype expert system.Selection of separation technologies and sequencing of separators are beingapproached in an integrated manner.The fuzzy match mechanism results in a relatively smaller subsetof favored schemes,constituting a hyperstructure for further quantitative evaluation and combinationoptimization.An industrial application example of aromatics extraction separation is presented.     

基于N步不变集的时滞切换系统的饱和控制

构造离散时滞切换系统的不变集,提出基于N步不变集的切换控制器设计方法,估计执行器饱和非线性的吸引域范围。首先,考虑时滞的影响,选取依赖于时滞的Lyapunov函数,构造时滞切换系统的不变集,并将其表达为若干个椭球集的凸组合,椭球集的个数与时滞常数相关。其次,在系统的前N个采样时刻,分别施加不同的饱和约束,求解得到一组椭球集,椭球集的个数与常数N相关,而每一步计算得到的椭球集均为时滞切换系统的不变集。再将N个不变集用一组凸包系数拟合,即可获取较大的吸引域估计。最后,在满足平均驻留时间约束的条件下设计切换律,并设计状态反馈控制器,保证闭环系统渐近稳定。控制器的求解转化为线性矩阵不等式的可行性问题。仿真结果验证了所提方法的可行性和有效性。     

复杂体制雷达辐射源信号特征的集对分析

为解决复杂体制雷达辐射源信号特征的评价问题,提出了基于集对分析理论的复杂体制雷达辐射源信号特征分析模型.首先对复杂体制雷达辐射源信号特征评价指标体系的指标权重作层次分析,再通过集对分析理论对复杂体制雷达辐射源信号特征评估的决策矩阵进行同一度分析,最后联合指标权重矩阵和决策同一度矩阵对复杂体制雷达辐射源信号特征进行综合评判.仿真结果表明,该模型是有效、可行的,能够更好地实现对复杂体制雷达辐射源信号特征的分析和评估.     

基于集对分析与NSGA-Ⅱ的生产作业多目标优化

针对生产过程中生产作业的优化调度问题,以生产质量、效率和成本阈值为约束条件,基于集对分析建立了的生产质量—效率—成本控制的生产作业多目标优化模型;利用快速非支配排序遗传算法（NSGA-Ⅱ）求解优化模型,得到相对确定条件下质量—效率—成本控制的Pareto最优解集。决策者依据实际生产过程需要,为各项生产作业从Pareto最优解集中筛选最合理的调度方案。最后,通过算例仿真验证了结合集对分析与NSGA-Ⅱ的方法解决生产作业多目标优化问题的准确性、有效性和实用性。     

求解工程结构优化问题的改进布谷鸟搜索算法

针对布谷鸟搜索算法局部搜索能力不强的缺点, 提出一种基于随机局部搜索的改进布谷鸟搜索算法用于求解工程结构优化问题。引入惯性权重以平衡算法的勘探和开采能力; 利用随机局部搜索方法对当前最优解进行局部搜索, 以加快算法的收敛速度。两个工程结构优化问题的实验结果表明了该算法的可行性和有效性。