提高铝型材表面质量的一种新途径-机械扫纹法

论述了提高铝型材表面质量的一种新途径－机械扫纹法,并着重介绍机械扫纹的方法,扫纹后型材的生产工艺和技术要点,以及用经济分析对比的数据和实际效果来证明该技术的价值。     

光磁共振实验最佳扫场参数的确定和抽运信号图分析

用光磁共振实验测定铷原子的g因子和地磁场，并对实验得到的数据进行分析并确定测定g因子的最佳扫场幅度。从理论上对各种抽运信号图形的产生进行了分析。     

Detailed Real-Time Urban 3D Reconstruction from Video

The paper presents a system for automatic, geo-registered, real-time 3D reconstruction from video of urban scenes. The system collects video streams, as well as GPS and inertia measurements in order to place the reconstructed models in geo-registered coordinates. It is designed using current state of the art real-time modules for all processing steps. It employs commodity graphics hardware and standard CPU’s to achieve real-time performance. We present the main considerations in designing the system and the steps of the processing pipeline. Our system extends existing algorithms to meet the robustness and variability necessary to operate out of the lab. To account for the large dynamic range of outdoor videos the processing pipeline estimates global camera gain changes in the feature tracking stage and efficiently compensates for these in stereo estimation without impacting the real-time performance. The required accuracy for many applications is achieved with a two-step stereo reconstruction process exploiting the redundancy across frames. We show results on real video sequences comprising hundreds of thousands of frames.     

4.5MV静电加速器离子聚束电路的设计

在加速器中产生脉冲中子源需要对离子源脉冲化。采用10MHz聚束和2.5MHz扫描频率，通过在交叉场分析器设置直流偏置电压和变频切割电压，改变离子束脉冲频率，使之从2.5MHz到39KHz可调。本文介绍了脉冲频率可调，幅度可调的脉冲化电路的改进设计及初步实验结果，并给出功放热设计参考。     

Topological evolution of laminar juncture flows under different critical parameters

Horseshoe vortex topological structure has been studied extensively in the past, traditional “saddle of separation” and new “attachment saddle point” topologies found in literature both have theoretical basis and experimental and computational evidences for support. The laminar incompressible juncture flows at low Reynolds numbers especially are observed to have new topology. Studies concerning the existence of the new topology though found in literature, the topological evolution and its dependency on various critical flow parameters require further investigation. A Particle Image Velocimetry based analysis is carried out to observe the effect of aspect ratio, δ*/D and shape of the obstacle on laminar horseshoe vortex topology for small obstacles. Rise in aspect ratio evolves the topology from the traditional to new for all the cases observed. The circular cross section obstacles are found more apt to having the new topology compared to square cross sections. It is noted that the sweeping effect of the fluid above the vortex system in which horseshoe vortex is immersed plays a critical role in this evolution. Topological evolution is observed not only in the most upstream singular point region of horseshoe vortex system but also in the corner region. The corner vortex topology evolves from the traditional type to new one before the topological evolution of the most upstream singular point, resulting in a new topological pattern of the laminar juncture flows “separation-attachment combination”. The study may help extend the understanding of the three-dimensional boundary layer separation phenomenon.     

宽带系统校准的新方法

通常的扫频源法对系统进行校准时只能校准其幅频响应而丢失了相位信息。本方法可以利用Hilbert(希尔伯特)变换恢复原扫频源法丢失的相位信息,由幅度和相位信息重构宽带系统的冲激响应和阶跃响应,以实现对宽带系统,例如各类示波器进行较为精确的校准。     

某扫雷犁系统GA-BP神经网络建模

利用AMESim和MATLAB／Simulink联合仿真,建立某扫雷犁电液伺服系统的模型,在此基础上研究了GA—BP神经网络的辨识问题,对此非线性系统进行离线辨识实验,实验结果验证了该建模方法的有效性。     

气扫式膜蒸馏传质传热过程

对气扫式膜蒸馏（SGMD）的热量和质量传递机理进行了研究,建立了该过程的热量和质量传递模型,并对模型进行了计算,得出了吹扫气流速、组件长度、进料流速和进料温度对膜通量的影响。通过实验对模型计算结果进行了验证。实验结果表明模型计算值与实验值非常接近。随吹扫气流速的增大,通量先增加然后趋近于平衡。组件长度越短通量越高。进料流速对通量的影响很小,随膜丝内Reynolds数的增加,通量稍有增加,随进料温度的升高,通量呈指数倍增加。     

浅谈玻璃熔窑火焰换向的过程控制

运用专家经验、人工智能与计算机技术相结合,设计的玻璃熔窑火焰换向控制方案,取得了良好的效果.     

ObjectARX技术在扫掠区域边界曲线生成中的应用

ObiectARX是AutcCAD2000面向对象的强大的应用程序开发环境。首先介绍了ObiectARX技术,然后利用ObiectARX技术并结合Visual C 6．0,探讨了在扫掠区域边界曲线生成中的应用,最后给出了扫掠区域边界曲线生成实例。