基于PBFT区块链技术的电网企业仓储系统

提出了一种基于实用拜占庭容错(PBFT)算法的区块链技术,首先对传统的实用拜占庭容错算法原理进行了阐述,该传统算法包含前期、需求、预准备、准备、确认、答复6个阶段,但传统算法具有实时性差、缺乏惩罚机制、带宽高的缺点。针对出现的这些问题,又对传统算法进行了改进,具体涉及记账节点、共识过程以及视图切换过程。通过测试进一步证明了该改进算法的实用性,并将该算法应用于电网企业中,构建的虚拟仓库实现了联储联备,降低了库存资金的耗费,并且提高了电网企业库存管理的效率。     

基于落渣碰撞信号的锅炉结渣诊断技术的研究

针对我国燃煤锅炉普遍存在的结渣问题,提出了基于落渣碰撞信号的结渣诊断方法:能量包络线法以信号的第一个峰值点作为到达时刻,后通过网格法确定撞击区域。通过多种质量、软硬程度材料的平板冲击实验模拟炉内落渣碰撞信号,结果表明该方法具有较高的定位精度,相对误差在10%以内,且随落渣的质量和硬度的增大,定位精度有所提升;在一定强度的噪声干扰下,仍能较好地定位撞击区域,具有工程应用价值。     

Characterizations of friction welding joint interface for AISI 316

Because of heat amount is different from peripheral to central of friction welding interface, which is leaded to vary the characterizations along that interface. Current study, respectively, focused on the effect of different friction pressure on micro-structural and mechanical properties of that friction welding joint interface. Presently, these friction pressures are 110, 130, 150 and 170 MPa while kept all other conditions constant. The effects of different friction pressure on welding interface characterization were investigated by EDX, SEM, tensile, compression, impact and hardness tests. The tensile tests carried out on the standardized test piece with diameter 6 mm and 8 mm, thus, compression tests were extracted from the positions of 0°, 45° 90° with test specimen of 4 mm diameter and 6.5 mm length at weld center. Whereas, the impact test pieces were picked up in two positions, the first one is symmetrical, which it obtained to the respect of the rotation axis and the interface, on the other hand, the second one is non-symmetrical with the axis of rotation and symmetrical to the interface, for making the notch head coincide with the center of the welded joint, The obtained results showed that with reducing of friction pressure will present lack of bonding increasing from peripheral toward the welding center, which will responsible on reducing of the mechanical properties such as tensile, compression and impact strength.     

CSJ型炮孔测量仪倾角测量的改进设想

介绍了CSJ型炮孔测量仪的炮孔倾角测量原理及其倾角测量功能在实际应用中存在的缺陷,分析倾角测量误差过大的原因,推导最大偏差角的计算公式。针对该缺陷,提出了增加楔形弹片、柔性连接和电子压力传感器的改进设想。预计经过改进后的测量仪,其导向管能自动与孔壁贴伏,且贴伏程度可测,同时可测得炮孔的直径,降低人员操作与导向管尺寸对炮孔倾角测量的影响,提高测量精度。     

基于二分比较法的架空线路故障判断原理及其应用

针对架空线路故障判断问题,文章介绍了二分比较法的原理及二分巡线器,并通过实例阐述其现场应用