磷酸盐玻璃中稀土离子的发光浓度效应研究

磷酸盐玻璃中稀土离子的发光浓度效应研究王民权，马立新，樊先平（浙江大学材料科学与工程系３１００２７）（南京航空航天大学）ＳｔｕｄｙｏｎＣｏｎｃｅｎｔｒａｔｉｏｎＥｆｆｅｃｔｓｏｆＲａｒｅＥａｒｔｈＩｏｎｓｉｎＰｈｏｓｐｈａｔｅＧｌａｓｓｅｓ￥Ｗａｎｇ...     

壳聚糖／聚丙烯酸钠聚离子复合膜的醇－水渗透汽化分离性能

研究了壳聚糖－醋酸溶液与聚丙烯酸钠溶液形成的复合膜用于水－乙醇混合物的渗透汽化分离，在膜组成Ｃ＝０．８０时，分离系数出现最大值，对异丙醇－水体系的分离系数为∞。溶解－扩散过程对渗透汽化过程起着重大作用。由－ＮＨ＋３…ＯＯＣ－交联的聚离子复合膜对醇－水体系具有稳定的分离性能。     

Preparation and Properties of Sintering Additives Coated Si3N4 from Heterogeneous Nucleation Processing

The sintering additives such as Al2O3 and /or Y2O3 were coated on the surfaces of Si3N4 particles via heterogeneous nucleation processing using a buffered pH solution as the precipitation reagent .They nucleated and grew only on the surfaces of Si3N4 and did not form sol particles in solution by TEM observation .The isoelectric point(IEP) of coated Si3N4 was different from that of as-received Si3N4.The IEP of Al(OH)3-coated Si3N4 occurred at pH8.4, which is close to that of alumina .When Al(OH)3-coated Si3N4 particles were coated with Y(OH)3,the IEP of coated Si3N4 powder shifted from pH8.4 to pH9.2 ,similar to that of yttria.In addition ,the rheological data showed that Al2O3 and /or Y2O3 coated Si3N4 suspension is nearly Newtonian and that added Si3N4 suspension shows a shear rate thinning behavior.     

Mg-Si基热电化合物的研究现状

重点综述了Mg-Si基热电化合物的基本特性，该体系热电材料的制备方法与掺杂改性的研究进展，并提出了要重点解决的问题。     

Ion irradiation—induced structure damage to botanic samples using the ion transmission energy spectrum

1 INTRODUCTIONThe new aPplications of low energy heavy ion beam in irradi4ted botanical materialswere studied in recellt yeaxs. The beaminduced mutation effect on crop seeds has causedthe attention of physicist and biologists.[1l:] FOr examPle, 1ow energy ions can induceremarkable mutation to rice seeds.[3] There are many special phenomena when heavyions bombard botanic sW1e due to its special structure. Some studies showed that tllepenetration depths of some ions were far larger than t…     

柠檬酸月桂醇酯的合成

介绍了柠檬酸月桂醇酯的合成方法,并经正交实验得出合成的最佳工艺条件:反应温度132℃,反应时间120min,月桂醇/柠檬酸=1:1(mol比),催化剂用量:0.2g。     

工业还原NS—掺杂蓝钨过程中掺杂剂相的形成和结合

本文叙述了用于生产具有不下垂性能的细钨丝的ＮＳ－掺杂蓝钨工业还原过程中掺杂剂相的形成和结合。在还原过程中结合适量的掺杂剂是钾残留在烧结锭中的基本保证，钾能在丝材制造中形成钾泡串，使在随后的的灯丝工作时形成大晶联锁微结构，而这是不下垂特性的关键所在。本文的第一部分讨论了金属钨粉的工业生产方法。虽然掺杂Ｋ、Ａｌ、Ｓｉ的钨粉的生产方法与末掺杂的钨粉的生产方法基本相同，但仍有一些特别的区别要介绍。本文分析     

离子膜烧碱计算机控制系统

介绍了化工部“八五”攻关项目——离子膜烧碱计算机控制系统，就系统的构成、功能以及离子膜烧碱工艺中一些较为复杂的控制方案作了详细说明     

Ge／Pd／n—GaAs低阻欧姆接触的SIMS分析

采用Ｇｅ／Ｐｄ／ＧａＡｓ结构和快速热退火在ｎ－ＧａＡｓ上形成了低阻欧姆接触，利用二次离子质谱技术揭示和讨论了低欧姆接触形成的机理。比较了采用Ｘ＾＋和ＧｓＸ＾＋信号检测的Ｇｅ，Ｐｄ，Ｇａ和Ａｓ的深度分布。结果表明采用ＣｓＸ＾＋可以提供更准确的结果和成分信息。