巧用TPP608耐摩擦剂

耐摩擦剂是一种油墨辅助剂,其作用是在印刷过程中调整油墨适性、消除和克服印刷故障。 印刷者在印刷生产中常常会碰到纸张掉毛、掉粉、印品蹭脏、表面无光泽、油墨不干、油墨表面玻璃化(晶化)及粉化等现象。如今,有了TPP608     

Preparation and Properties of Sintering Additives Coated Si3N4 from Heterogeneous Nucleation Processing

The sintering additives such as Al2O3 and /or Y2O3 were coated on the surfaces of Si3N4 particles via heterogeneous nucleation processing using a buffered pH solution as the precipitation reagent .They nucleated and grew only on the surfaces of Si3N4 and did not form sol particles in solution by TEM observation .The isoelectric point(IEP) of coated Si3N4 was different from that of as-received Si3N4.The IEP of Al(OH)3-coated Si3N4 occurred at pH8.4, which is close to that of alumina .When Al(OH)3-coated Si3N4 particles were coated with Y(OH)3,the IEP of coated Si3N4 powder shifted from pH8.4 to pH9.2 ,similar to that of yttria.In addition ,the rheological data showed that Al2O3 and /or Y2O3 coated Si3N4 suspension is nearly Newtonian and that added Si3N4 suspension shows a shear rate thinning behavior.     

BaTiO_3系PTCR热敏电阻器用烧结助剂的研究

研究了烧结助剂的作用，实验结果表明：如只引入半导化元素，不引入烧结助剂，则室温电阻率ρ２５很大，甚至是绝缘体。由于烧结助剂的加入，既改善了ＰＴＣＲ热敏电阻陶瓷的烧结性，又改善了其ρ２５、耐电压Ｖｂ、ＰＴＣ效应等特性，从而使产品的各种特性易于重复。烧结助剂昔日多用ＡＳＴ，现在常用ＳｉＯ２，其加入量ｘ宜小于２％。ＳｉＯ２的纯度、杂质等化学特性，与粒子形状、粒度分布、晶系等物理特性，对ＰＴＣＲ热敏电阻器的电性能有很大的影响。据此提出了ＢａＴｉＯ３系ＰＴＣＲ热敏电阻器用ＳｉＯ２的技术标准。     

助剂对Pd/树脂醚化催化剂催化性能的影响 Ⅰ.铝助剂的影响

研究了不同助剂对Ｐｄ／树脂醚化催化剂在临氢条件下对催化裂化汽油Ｃ５馏份与甲醇和Ｈ２反应的催化性能的影响。结果表明，在Ｐｄ／树脂醚化催化剂中引入Ｚｒ、Ｔｉ、Ｂ、Ｓｎ和Ａｌ等助剂后，都能改善催化剂的醚化、双键异构和二烯烃选择性加氢活性，其中以Ａｌ、Ｓｎ为最好。Ａｌ助剂的体积质量和负载方式对Ｐｄ－Ａｌ／树脂醚化催化剂的活性有影响。ＢＥＴ方法和Ｘ－射线荧光光谱分析（ＸＦＳＡ）表明，Ａｌ助剂对Ｐｄ－Ａｌ／树脂醚化催化剂的表面积、孔结构和Ｐｄ离子交换量影响较小。     

烧结微孔材料粒径分布形态分析

本文运用定量金相法测量烧结微孔材料之颗粒粒径。根据统计分析原理，验证其粒径分布服从瑞利（Ｒａｙｌｅｉｇｈ）分布律。     

空气中烧成的镍导体及其应用

将空气中烧成的镍导体用于散热制冷片制作工艺中，可降低成本，提高合格率。通过实验得到的最佳值为：镍导体中４号玻璃（ＳｉＯ２＞３０，Ｂ２Ｏ３＞１０，ＰｂＯ＜５５，ＴｉＯ２少许）的含量４．５％，化学镀镍时间５０ｍｉｎ，方阻４７．５ｍΩ／□，附着力８．１Ｎ／ｍｍ２。