关于举办“材料热处理畸变开裂及失效分析”培训班的通知

鉴于当前新型冠状病毒感染肺炎疫情的严峻形势,根据疫情防控工作有关要求,全国热处理学会调整近期活动计划。原定于3月在上海举办的材料热处理变形开裂及失效分析培训延期至6月10-12日举办,敬请关注。为了提高热处理行业从业人员的失效分析技术水平,提高金属材料及热处理工程师解决实际问题的综合能力,推动新材料、新工艺、新技术的普及,促进我国材料产业和高端装备制造业的发展。中国机械工程学会热处理分会按照学会年度活动计划,拟于上海举办"材料热处理畸变开裂及失效分析"培训班。现诚邀相关人员报名参加。     

微纳米气液分散体系吸收脱除NO的工艺优化研究

以模拟烟气为气相,酸碱溶液、十二烷基苯磺酸钠(SDBS)溶液为液相,利用微纳米气泡发生器将模拟烟气和吸收液混合产生微纳米气液吸收脱除模拟烟气中的NO,探讨了进气NO体积分数、吸收液pH值、O_2含量、SDBS浓度和吸收液温度等对脱硝效率的影响。结果表明,脱硝效率随着进气NO体积分数和SDBS溶液浓度的增大而降低;随着吸收液pH的增大,先降低后缓慢增大;随着O_2含量的增大而增大;随着吸收液温度的上升先增大后减小。最佳工艺条件为:进气NO体积分数0.02%,吸收液pH值2.0,吸收液温度25℃,O_2含量8%。在最佳工艺条件下,NO吸收效率可达到87.8%。     

功能化纳米金属有机骨架材料的合成及其药物传输应用

本文总结了最近与纳米金属有机骨架材料(NMOFs)相关的研究进展,重点是合成策略、功能化修饰和药物传输方面应用。     

Effects of Cooling Rate and Component on the Microstructure and Mechanical Properties of Mg–Zn–Y Alloys

The microstructure and mechanical properties of Mg–6Zn–1Y and Mg–6Zn–3Y(wt%) alloys under different cooling rates were investigated. The results show that the second dendrite arm spacing(SDAS) of Mg–6Zn–1Y and Mg–6Zn–3Y is reduced by 32 and 30% with increasing cooling rates(Rc) from 10.2 to 23 K/s, which can be predicted using a empirical model of SDAS=68 R 0:45:45cand SDAS=73 R 0c, respectively. The compressive strength of both alloys increases with increasing the cooling rate, which is attributed to the increase of volume fraction(Vf) of secondary phases under high cooling rate. The interaction of the cooling rate and component with SDAS has been theoretically analyzed using interdependence theory.