Analysis and characterization of orientation structure of pre-oxidized PAN fibers in high magnetic fields

PAN fibers pre-oxidized at 240 ℃, 260 ℃, 280 ℃, 300 ℃ were treated in 8 T, 12 T, 16 T high magnetic fields, respectively. The experimental result implied that there were two kinds of magnetic units cyan and carbon-nitrogen heterocycle in pre-oxidized PAN fibers, and the movement of magnetic units resulted in changes of orientation structure of pre-oxidized PAN fibers in high magnetic fields. Overall orientation increased with increase of magnetic field intensity and extension of processing time, whereas change of crystalline orientation depended on magnetic field intensity and content of carbon-nitrogen heterocycle due to the competition of two magnetic units. Furthermore, magnetic fields induced the conversion from amorphous region to crystal region and improved crystalline properties of pre-oxidized PAN fibers.     

Enhanced healing of full-thickness diabetic wounds using bioactive glass and Yunnan baiyao ointments

In order to accelerate the chronic wounds healing, we investigated the healing effects of bioactive glass and Yuunan baiyao ointments in streptozotocin-induced diabetic rats. The ointments were prepared by mixing 45S5 bioactive glass powder （16% weight） with Vaseline and different weight percentages of Yurman baiyao. Full-thickness defect wounds were created on the back of 130 SD rats and were randomly divided into 8 groups. The wound healing rates were calculated at 4, 7, 10, 14 and 21 days after surgery. The samples were harvested for further observations. Considering the wound closure rate, group 6 （with 5% Yuunan baiyao） has better wound healing performance than other diabetic groups. The lower inflammatory response was observed by gross observation and confirmed by the results of H＆E staining and TEM observation. Besides, the proliferation of fibroblasts, the formation of granulation tissue, as well as the vascularization, were improved in group 6 compared to other diabetic groups. All results suggest that bioactive glass and Yunnan baiyao ointments can accelerate the recovery of diabetes-impaired skin wounds, and comparing to other diabetic groups, group 6 （with 5% Yunnan baiyao） has better healing effect.     

芳纶纤维表面改性及其对芳纶纸力学性能的影响

利用氯磺酸、醋酸酐对芳纶短切纤维进行了改性处理,再用处理后的纤维配抄芳纶纸,探讨了处理工艺对芳纶纸力学性能的影响.结果表明,当氯磺酸浓度为2%,处理时间为10min,处理温度为50℃时,芳纶纸的力学性能较好.用100%的醋酸酐对芳纶纤维进行处理然后配抄成纸,所得纸张的抗张指数和撕裂指数分别提高了63.8%和21.4%.另外,芳纶纤维经过醋酸酐浸泡1min后再用甲醇处理3min,芳纶纸的抗张指数和撕裂指数分别提高了84.7%和38.4%.     

纤维堆囊菌产埃博霉素B的发酵条件优化

埃博霉素B是由纤维堆囊菌产生的具有抗癌作用的大环内酯类化合物,是一种新型的抗肿瘤谱广、作用性强的抗肿瘤药物.以纤维堆囊菌SoF5-76为供试菌株,采用单因素试验和正交试验设计,对其产埃博霉素B的发酵条件进行了优化,确定了最优发酵条件为:初始pH 7.4,装液量50/250mL,转速200r/min,种龄60h,接种量10%,温度30℃,发酵周期6d.在此最优发酵条件下,埃博霉素B的产量为35.24mg/L,比优化前提高了17.67%.     

SiO2/TiO2共混电纺纤维的制备及光催化性能研究

以正硅酸乙酯(TEOS)和钛酸四丁酯(Ti(OC4H9)4)为原料,采用静电纺丝技术制备了SiO2/TiO2共混纤维膜,经过煅烧后得到了SiO2/TiO2无机纳米纤维.采用TG-DTA对SiO2/TiO2共混无机纤维的热行为进行了表征,并对不同电压、不同纺丝液配比以及不同煅烧温度条件下得到的样品进行了SEM表征,研究不同条件对纤维形貌和光催化性能的影响.结果表明:当纺丝电压+17 kV、接收距离13.5 cm时,纺丝液最佳配比是4.0 g PVP、11 mL EtOH、1.0 mL HAc、1.3 mL TEOS和1.0 mL Ti(OC4H9)4.为了得到形貌和组成兼备的SiO2/TiO2共混无机纤维,确定最佳热处理条件是450℃保温3 h,样品在紫外光照射下对亚甲基蓝的最高去除率达到51%.     

×Synergistic action of non-solvent induced phase separation in preparation of poly（vinyl butyral） hollow fiber membrane via thermally induced phase separation

A systematic study of air gap distance effects on the structure and properties of poly（vinyl butyral） hollow fiber membrane via thermally induced phase separation （TIPS） has been carried out. The results show that the hollow fiber membrane prepared at air gap zero has no skin layer; the pore size near the outer surface is larger than that near the inner surface; and the special pore channel-like structure near the outer surface is formed, which is quite different with the typical sponge-like structure caused by TIPS and the finger-like structure caused by non-solvent induced phase separation （NIPS）, because of the synergistic action of non-solvent induced phase separation at air gap zero. The pore size gradually decreases from outer surface layer to the intermediate layer, but increases gradually from intermediate layer to the inner surface layer. With the increase of air gap distance, the pore size near the outer surface gets smaller and a dense skin layer is formed, and the pore size gradually increases from the outer surface layer to the inner surface layer. Water permeability of the hollow fiber membrane decreases with air gap distance, the water permeability decreases sharply from 45.50× 10^-7 to 4.52× 10^-7 m^3/（m^2-s.kPa） as air gap increases from 0 to 10 mm at take-up speed of 0.236 m/s, further decreases from 4.52×10^-7 to 1.00×10 ^-8m^3/（m^2.s·kPa） as the air gap increases from 10 to 40 mm. Both the breaking strength and the elongation increase with the increase of air gap distance. The breaking strength increases from 2.25 MPa to 4.19 MPa and the elongation increases from 33.9% to 132.6% as air gap increases from 0 mm to 40 mm at take-up speed 0.236 m/s.     

Effects of coagulation bath temperature on structure and performance of poly （vinyl butyral） hollow fiber membranes via thermally induced phase separation

Poly （vinyl butyral） （PVB） hollow fiber membranes were fabricated via thermally induced phase separation （TIPS）. The effects of coagulation bath temperature （CBT） on the structure and performance of membranes were investigated in detail. The morphologies of the membranes were studied by scanning electron microscopy （SEM）, the performances of water permeability, rejection, breaking strength and elongation were measured, respectively. The results indicate that all the membranes have the asymmetric morphology and the thickness of the skin layer decreases and the pore size of the outer layer increases with the increase of CBT. The permeability of membranes prepared at air gap 1.0 cm and take-up speed 0.253 m/s increases from 1.047×10-7 to 5.909×10-7 m3/（m2·s-kPa） with the CBT increasing from 20 ℃ to 40℃, and sharply increases to 35.226×10 7 m3/（m2.s.kPa）once the CBT arrives at 50 ℃. While the carbonic ink rejections have no significant decrease, totally exceed 98%, but that of acid-maleic acid copolymer greatly decreases with the increase of CBT. Both the breaking strength and elongation decrease with the increase of CBT.     

无线传感器网络自适应信标交换算法的NS-2实现

无线传感器网络贪婪地理路由协议在动态环境中,采用自适应信标交换算法来自构建与维护邻居节点表,可以提高数据分组传送成功率,而且还可降低控制开销。本文具体描述了贪婪地理路由协议自适应信标交换算法在NS-2仿真平台的实现过程与部分细节,可以为贪婪地理路由协议的研究以及NS-2的仿真提供有益参考。     

多孔碳板气-气增湿器新型设计方法

多孔碳板是一种具有高孔隙率和高导热性能的多孔材料,适合制作燃料电池增湿器,针对这一特性,提出了一种多孔碳板气-气增湿器的基本结构,以停留-扩散时间比和流道内气体流速为设计依据,提出了多孔碳板气-气增湿器的优化设计流程。通过优化设计,使增湿器在燃料电池所需气体流量的条件下工作时,停留-扩散时间比与气体流速均在一定范围之内,既保证增湿器的增湿效率较高,又保证增湿器体积不至于过大。根据该设计方法为一个25 kW燃料电池系统设计了多孔碳板气-气增湿器,能满足增湿要求。     

玄武岩纤维布加固框架结构抗震性能数值分析

利用玄武岩纤维布对九层框架的粱柱节点进行了加固,运用ANSYS有限元分析软件对不同加固方案下结构的整体抗震性能进行了动力分析．分析结果表明,在玄武岩纤维布用料相同的条件下,局部加固框架的角柱节点比边柱节点更有助于提高框架结构的抗震能力,且在地震作用下。采取整体加固的方案更有助于提高框架结构的安全性．