碳纤维经氧等离子/KH550处理后的表面形态和结构

碳纤维(CF)表面经氧等离子、KH550和 LiAlH_4处理后,其物理和化学性能得以改善.由于提高了 CF 和树脂间的联结,使 CF 复合材料的层间剪切强度提高50%以上,在湿热下的强度保留率达94%以上.使用纤维接触角测定仪,SEM 和 XPS 等对 CF 表面的浸润性、形态和化学组成进行了研究.实验指出:CF 经等离子和 KH550处理后,其临界表面能有了提高;CF 本身仅受氧离子刻蚀,故其拉伸强度的损失小于其他处理方法.     

Structural significance of the alkyl substituent at the C-4 of (+)-trans-verbenyl acetate in sex pheromonal activity of the American cockroach

The significance of the alkyl group at the C-4 of (+)-trans-verbenyl acetate, which is the sex pheromone mimic of the American cockroach, was investigated. Seven alcohols possessing an ethyl, propyl, or dimethyl group at this position of the 6,6-dimethylbicyclo[3.1.1]heptane skeleton were synthesized and evaluated by behavioral assay. All of the alcohols were inactive, while three of four acetates of the 2-alcohols induced sexual behavior in male cockroaches at the 0.02 or 0.5 mg dosage level, either of which is many orders of magnitude higher than the threshold level of the natural sex pheromones (10^–8 mg). Among the acetates, the compounds with a methyl group or an -oriented ethyl group at C-4 showed the highest activity. The results are discussed in terms of spatial requirements of the molecules for interactions with the receptor.Studies on the sex pheromone mimic of the American cockroach, (+)-trans-verbenyl acetate. Part VIII. For Part VII, seeComp. Biochem. Physiol.,70A: 229–234 (1981).     

基于Linux+ARM的多格式视频图像采集系统的设计

设计了基于S3C2440微处理器的视频图像采集系统,详细分析了该系统的启动过程。在一块裸板上搭建起整个视频图像采集系统。结合V4L2技术完成了支持YUV、MJPEG图像格式的USB摄像头和支持RGB图像格式的CMOS摄像头的多格式视频图像采集系统。测试结果表明,该系统可以在LCD显示屏上动态显示多格式摄像头所采集到的视频图像,且视频图像具有清晰度高、流畅性好、稳定性强等特点,具有进一步推广使用的广阔前景。     

Effect of excess boron fertilization on status and availability of boron in calcareous soils

Field experiments were conducted at Al-Qatif area in the eastern region of Saudi Arabia to study the status and availability of B under B fertilization regime in three types of calcareous soils and to evaluate the response of two alfalfa varieties, Hassawi (local variety) and Hyden (american variety), to increasing levels of added B.Boron was applied at 7 rates as Na₂B₄O₇.10H₂O. Four cuttings were taken from each site at different intervals. Data showed that extractable B by hot-water and NH₄HCO₃-DTPA (8 days after borax application) was significantly (p <0.001) affected by soil type and B applications. The amount of B recovered by hot-water from the three soils, 200 days after borax application, was in the following order: sandy loam > sandy clay loam > clay loam.Total dry matter of alfalfa (4 cuttings) was significantly (p <0.05) affected by soil type, borax application rates and alfalfa variety.The critical level of B in plant as determined by Cate and Nelson analysis, ranged from 148 to 652 mg kg^–1 dry matter for Hassawi cultivar and 138 to 521 mg kg^–1 for Hyden cultivar in the first harvest. However, the upper critical levels for the 2nd, 3rd and 4th harvests were 800, 875 and 935 mg B kg^–1 dry matter for Hassawi and 603, 723 and 812 mg B kg^–1 for Hyden varieties, respectively. Nevertheless, the lower critical levels for 2nd, 3rd and 4th harvests ranged from 148 to 153 mg B kg^–1 dry matter for Hassawi and 138 to 142 mg B kg^–1 for Hyden.     

Quantitative preparation of long chain thioethers from an oxo-trans-2-enoic ester and a 9,12-dioxo-trans-10-enoic acid

Branched-chain thioethers have been prepared from methyl 4-oxo-trans-2-hexadecenoate and 9,12-dioxo-trans-10-octadecenoic acid. The reagents involved in these preparations were mercaptoacetic and mercaptopropionic acids. The yields of these thioethers are almost quantitative.     

Kinetics for benzoylation of sodium 4-acetylphenoxide via third-liquid phase in the phase-transfer catalysis

In this research, the kinetics for synthesizing 4-acetylphenyl benzoate (R^*COOR) from benzoylation of sodium 4-acetylphenoxide via third-liquid phase-transfer catalysis was investigated. The reaction rate was observed to be strongly dependent on agitation speeds in the third-phase catalytic reaction. By forming the third-liquid phase, the observed reaction can be greatly enhanced to give a product yield of 100% in a duration of 3 min at 20 °C and 200 rpm. If a third-liquid phase was not formed in the liquid–liquid system, the reaction rate is very slow and the product yield is only 2% in 3 min at 20 °C. The reaction conducted in third-liquid phase-transfer catalytic system is faster than that in LLPTC system by 25–28 times. The amount of catalytic intermediate (QOR) in the third-liquid phase was about 50% of the catalyst initially added and kept about 30% of it remained after 1 min, and only small amounts of a catalytic intermediate residing in the organic phase were observed during the reaction using methyl t-butyl ether as the solvent. The concentration of catalytic intermediate slightly decreased with increasing reaction time, while the molar ratio of QOR to benzyl tri-n-butylammonium cation in the third-liquid phase remained almost constant after 1 min and increased with increasing agitation speeds. The experimental results were well described by the pseudo-first-order kinetics. The present work shows an effective method to synthesize 4-acetylphenyl benzoate.     

SiC晶须对Si3N4陶瓷基复合材料机械强度的影响

制备了含10vol％,20vol％及30vol％SiC晶须的Si_3N_4基复合材料,对其室温及高温机械强度的测试研究表明,SiC晶须对基体的高温机械性能有明显的增强作用。含20vol％SiC晶须的复合材料1200℃下强度达780MPa,比基体材料提高50％。通过SEM和TEM研究,讨论了SiC晶须增强的原因。