Fractional Adams–Moulton methods

In the simulation of dynamical systems exhibiting an ultraslow decay, differential equations of fractional order have been successfully proposed. In this paper we consider the problem of numerically solving fractional differential equations by means of a generalization of k  -step Adams–Moulton multistep methods. Our investigation is focused on stability properties and we determine intervals for the fractional order for which methods are at least A(π/2)$A(\pi /2)$-stable. Moreover we prove the A-stable character of k  -step methods for k=0$k=0$ and k=1$k=1$.     

卤水-白云石法制取氧化镁中杂质铁、锰的分布

主要研究了卤水-白云石法制取氧化镁过程中杂质铁、锰的分布情况，结果表明：原料白云石中杂质铁、锰大部分被带人产品，引起产品中铁、锰含量超标。通过对白云石进行精制试验，表明将灰乳过滤能除去一部分铁、锰杂质。若将制取过程中所得的氢氧化镁进行碳化处理，则产品质量超过了优等品的要求。     

手性麻黄素-卟啉锰催化剂的合成及催化性能的研究

以一类新型的手性麻黄素 -卟啉作配体 ,制备了金属锰配合物。考察了配合物对烯烃环氧化反应的催化性能 ,发现含麻黄素基团的锰卟啉催化剂在烯烃环氧化的两相溶剂 ( CH2 Cl2 /H2 O)体系中 ,不仅催化活性增强 ,同时具有相转移能力。还探讨了反应条件对环氧化结果的影响规律     

33Mn2V钢热变形本构方程研究

采用压缩实验法在Gleeble-1500热模拟实验机上测定了33Mn2V钢在恒定温度和恒定速度下的变形抗力.研究结果表明:33Mn2V钢热变形的流变应力随温度的升高和应变的增大而减小.以Kumar本构模型为基础建立了33Mn2V钢热变形的本构方程,同时也通过本构模型计算值与实验所得的数据进行比较,表明该模型能够满足工程应用精度.     

纳米SiO2添加量对Mn-Zn铁氧体显微结构及功耗的影响

对添加纳米级SiO2和普通级CaCO3组合对Mn-Zn铁氧体功率损耗的影响进行研究,采用扫描电子显微镜对Mn-Zn铁氧体材料的显微结构、晶界以及元素分布进行观察分析。结果表明,适量的纳米SiO2（与CaCO3组合）掺杂能够改善烧结铁氧体的微观结构并显著降低功率损耗,纳米SiO2添加量应不大于0.005％(wt),并发现在不同的测试温度下,SiO2添加量有不同的最佳值。在较低温度（≤60 ℃）下,纳米SiO2的最佳添加量为0.0025％(wt)。当材料在较高温度（≥80 ℃）测试时,适宜的纳米SiO2添加量为0.005％(wt)。     

(1-x)(Mg0.95Mn0.05)_2TiO_4-xCaTiO_3陶瓷的微波介电性能研究

采用传统固相法制备了(1-x)(Mg_0.95Mn_0.05)_2TiO_4-xCaTiO_3微波介质陶瓷,研究CaTiO_3添加量对陶瓷体系物相组成、显微结构以及微波介电性能的影响。XRD分析结果表明,陶瓷样品以(Mg_0.95Mn_0.05)_2TiO_4为主晶相,以CaTiO_3和MgTiO_3作为次晶相存在陶瓷样品中。另外发现添加CaTiO_3能增加陶瓷的致密度,并在1325~1400℃下都能促进陶瓷的烧结。当CaTiO_3的添加量为x=0.12时,复合陶瓷在1375℃烧结4 h时具有最佳的微波介电性能:介电常数ε_r=20.26,品质因数Q×f=35125.9 GHz,τ_f=+2.7×10~(-6)/℃。     

Direct regeneration of LiNi0.5Co0.2Mn0.3O2 cathode material from spent lithium-ion batteries

At present, metal ions from spent lithium-ion batteries are mostly recovered by the acid leaching procedure, which unavoidably introduces potential pollutants to the environment. Therefore, it is necessary to develop more direct and effective green recycling methods. In this research, a method for the direct regeneration of anode materials is reported, which includes the particles size reduction of recovered raw materials by jet milling and ball milling, followed by calcination at high temperature after lithium supplementation. The regenerated LiNi_0.5Co_0.2Mn_0.3O₂ single-crystal cathode material possessed a relatively ideal layered structure and a complete surface morphology when the lithium content was n(Ni + Co + Mn):n(Li) = 1:1.10 at a sintering temperature of 920 ℃, and a sintering time of 12 h. The first discharge specific capacity was 154.87 mA·h·g^-1 between 2.75 V and 4.2 V, with a capacity retention rate of 90% after 100 cycles.     

65Mn盘条拉拔过程中的断裂分析

对首钢65Mn弹簧盘条在拉拔过程中的断裂问题进行了探讨，通过观察分析不同形态的断口发现．杯锥状断裂、齐平状断裂和表面横裂是盘条在拉拔过程巾断裂的主要形式，盘条中的中心残余缩孔、大型夹杂及表面缺陷等是导致65Mn弹簧盘条断裂的主要因素。     

On Restricting Aspects in the Production of Nonmagnetic Cr‐Mn‐N‐alloyed Steels

Cr‐Mn steel grades with high nitrogen contents are becoming increasingly important in the field of austenitic stainless steels. Industrial production facilities allow to use two different strategies to reach a high nitrogen content. The first involves taking advantage of the pressurised‐electroslag remelting process, which is operated at elevated nitrogen partial pressure; the second consists of adding elements which increase the nitrogen solubility of the melt so that high nitrogen contents can be achieved at atmospheric pressure. This paper focuses on nitrogen solubility and austenite stability. These have been observed as important and in some cases restricting for the successful implementation and production of high alloyed Cr‐Mn austenitic steels. The precondition for a stable austenitic microstructure can be predicted with the help of equations using chromium and nickel equivalents. Different formulae were tested and their results compared to the microstructure of the alloys. The nitrogen solubility in the melt is particularly important for the steel grades cast under atmospheric conditions. It has been found feasible to produce steel grades up to 0.9 mass percent nitrogen at atmospheric pressure on an industrial scale. Several theoretical approaches for calculating the nitrogen solubility in the melt were tested for atmospheric conditions and compared to the chemical analyses of conventionally cast Cr‐Mn steel grades.