The prediction of crack growth in bonded joints under cyclic-fatigue loading I. Experimental studies

The performance of adhesively-bonded joints under monotonic and cyclic-fatigue loading has been investigated using a fracture-mechanics approach. The joints consisted of an epoxy film adhesive which was employed to bond aluminium-alloy substrates. The effects of undertaking cyclic-fatigue tests in (a) a ‘dry’ environment of 55% relative humidity at 23°C, and (b) a ‘wet’ environment of immersion in distilled water at 28°C were investigated. In particular, the influence of employing different surface pretreatments for the aluminium-alloy substrates was examined. In addition, single-lap joints were tested under cyclic fatigue loading in the two test environments, and a back-face strain technique has been used which revealed that crack propagation, rather than crack initiation, occupied the dominant proportion of the fatigue lifetime of the single-lap joints. In Part II, the data obtained in the present Part I paper will be employed to predict theoretically the lifetime of the adhesively-bonded single-lap joint specimens.     

Relationship between oxidative stability of vitamin E and production of fatty acids in oils during microwave heating

Effects of microwave heating on the oxidative stability ofd-tocopherols were studied in relation to the production of fatty acids in oils. During microwave heating, the stability of tocopherols decreased in the orderδ>β>γ>α. This order did not depend on the types of ethyl esters of fatty acids or oils present. But, the shorter the chainlength and the lower the degree of unsaturation of the fatty acid ethyl esters, the greater was the reduction in amount of individual tocopherols. A similar tendency was observed when tocopherol-stripped vegetable oils, with equimolar mixtures of tocopherols added, were treated under the same conditions. The reduction in tocopherols became greater with increasing levels of free fatty acids.     

微生物转化法合成L-酪氨酸

以对羟基苯甲醛、海因、氢氧化钠为原料 ,化学合成底物对羟基苯丙酮酸。采用来自大肠杆菌的天冬氨酸转氨酶对对羟基苯丙酮酸进行生物转化 ,并对转化条件进行了初步的研究 ,最终得到L-酪氨酸 ,转化率 75 %。     

Advancements in the design and validation of an air pollution integrated assessment model for Spain

This paper describes the design and application of the Atmospheric Evaluation and Research Integrated model for Spain (AERIS). Currently, AERIS can provide concentration profiles of NO₂, O₃, SO₂, NH₃, PM, as a response to emission variations of relevant sectors in Spain. Results are calculated using transfer matrices based on an air quality modelling system (AQMS) composed by the WRF (meteorology), SMOKE (emissions) and CMAQ (atmospheric-chemical processes) models. The AERIS outputs were statistically tested against the conventional AQMS and observations, revealing a good agreement in both cases. At the moment, integrated assessment in AERIS focuses only on the link between emissions and concentrations. The quantification of deposition, impacts (health, ecosystems) and costs will be introduced in the future. In conclusion, the main asset of AERIS is its accuracy in predicting air quality outcomes for different scenarios through a simple yet robust modelling framework, avoiding complex programming and long computing times.     

Sex pheromone specificity as a reproductive isolating mechanism among the sibling speciesArchips argyrospilus andA. mortuanus and other sympatric tortricine moths (Lepidoptera: Tortricidae)

MaleArchips argyrospilus (Walker) were maximally attracted to a 60404200 admixture of (Z)-11-tetradecenyl, (E)-11-tetradecenyl, (Z)-9-tetradecenyl and dodecyl acetates. The identification of (Z)-9-tetradecenyl acetate, in addition to the other 3 components reported previously, is the first report of a 4-component pheromone system in moths.Archips mortuanus Kearfoot, a sibling species, was maximally attracted to a blend of the same components, but in a 90101 mix of the tetradecenyl acetates. Among a number of tortricine moths that co-occur on apples and other hosts in New York, British Columbia, and elsewhere, differences in diel rhythms of attraction and seasonal distribution are insufficient to maintain reproductive isolation. Although the attractant systems of these species often possess components in common, males are maximally attracted to a speciesspecific blend. In tortricine moths attraction specificity appears to be a paramount mechanism for species partitioning.     

利用α-甲基苯乙烯合成佳乐麝香的研究

介绍一种新的佳乐麝香合成方法，并就反应的参数对反应过程的影响进行了探讨。     

Simple and economic syntheses of some (Z)-7- and (Z)-9-alkenyl acetates,and of (E,Z)-7,9-dodecadien-1-yl acetate,the sex pheromone of the European grapevine moth,using aleuritic acid as a common starting material

Short syntheses of (Z)-7-dodecen-1-yl acetate, (Z)-7-tetradecen-1-yl acetate, (Z)-9-dodecen-1-yl acetate, and (Z)-9-tetradecen-1-yl acetate from 7-hydroxyheptanal and 9-oxononanoic acid precursors obtained by oxidative cleavage of easily available aleuritic acid are reported. The key step in these syntheses is a stereoselective Wittig reaction between aldehyde and alkyl-phosphonium salt. Wittig-Horner type reaction of 7-hydroxyheptanal and diethyl cyanomethylphosphonate gave the ,-unsaturated nitrile derivative which after protection of the hydroxyl group was reduced to the corresponding aldehyde. Wittig reaction of the latter, followed by acetylation, completed the synthesis of (E,Z)-7,9-dodecadien-1-yl acetate, the sex pheromone of the European grapevine mothLobesia botrana Schiff.     

Potential for use of crushed waste calcined-clay brick as a supplementary cementitious material in Brazil

The Brazilian ceramic industry generates large amounts of calcined-clay waste. This paper examines the factors that influence its potential for use as a partial replacement of Portland cement. Superplasticized mortars of equal workability containing ground crushed waste calcined-clay brick (GCWCCB) in the proportions of 10, 20, 30 and 40% as a cement replacement were analyzed through mechanical tests, pore structure characterization and durability tests. The results indicated the optimal percentages of substitution lies between 10% to 20%. The potential reduction of CO₂ emissions could be as high as 10% of current Brazilian cement industry emissions if this approach were to be fully implemented, and it could be eligible for “Clean Development Mechanism” credits under Kyoto protocol.     

Adsorption and antibacterial effect of copper-exchanged montmorillonite on Escherichia coli K88

Calcium montmorillonite (Ca-MMT), sodium montmorillonite (Na-MMT) and acid-activated montmorillonite (AAM), and their Cu²⁺-exchanged montmorillonites (Cu-MMT), Cu*Ca-MMT, Cu*Na-MMT and Cu*AAM, were used to study the antibacterial activity on Escherichia coli K₈₈. AAM, Na-MMT and Ca-MMT showed some ability to reduce bacterial plate counts by 37.4%, 13.4% and 14.2%, respectively. Exchanging the montmorillonite with Cu²⁺ enhanced the antibacterial activity. The Cu*AAM, Cu*Na-MMT and Cu*Ca-MMT reduced the bacterial plate counts by 98.6%, 97.5% and 95.6%. Attempts were made to study the desorption of Cu²⁺ by washing with sterile physiological saline solution for 24 h. The washing solutions did not show a significant reduction of the bacterial counts, while the washed Cu-MMT retained their full antibacterial activity. Results from time-depending studies showed that the reduction of the bacterial counts by Cu-MMT increased during 24 h. The ranking of antibacterial activity of the three Cu-MMT was as Cu*AAM > Cu*Na-MMT > Cu*Ca-MMT. E. coli thrived optimally in a pH range from 5 to 7. Beyond this range, the bacterial counts decreased as the pH reduced the viability of the bacteria. The ranking of antibacterial activity of Cu-MMT was not affected by pH. The mechanism by which bacterial counts are reduced may involve the enhanced affinity of Cu-MMT for E. coli K₈₈ and the antibacterial activity of Cu²⁺.