电子束辐照和氢氧化铝对LLDPE/EVA共混物凝胶含量和力学性能的影响

研究了电子束辐照剂量和氢氧化铝(ATH)的含量对线性低密度聚乙烯(LLDPE)/乙烯-醋酸乙烯酯(EVA)共混物凝胶含量和力学性能的影响。辐照剂量是影响LLDPE/EVA/ATH阻燃体系凝胶含量的主要因素,而ATH对其凝胶含量的影响较小。随着ATH含量的增加,LLDPE/EVA共混物的拉伸强度逐步增加,断裂伸长率迅速下降。所有阻燃体系的拉伸强度均是随着辐照剂量的增加而逐步增大,但辐照剂量对这些阻燃体系的断裂伸长率的影响却比较复杂。     

以稀土固体超强酸Gd^3＋-SO4^2-／ZrO2催化合成三氯水杨酸正戊酯

以不同配比的Gd3 -SO42-/ZrO2稀土固体超强酸合成三氯水杨酸正戊酯为探针反应,筛选出制备稀土固体超强酸Gd3 -SO42-/ZrO2的最佳工艺条件为:20 g ZrOCl2.8H2O1、.0%(质量分数)Gd2(SO4)3和0.8 mol.L-1H2SO4混合液,搅拌60 min后浸泡3 h,600℃焙烧3 h。以GSZ-1合成三氯水杨酸正戊酯的最佳反应条件为:72.8 g(0.3 mol)3,5,6-三氯水杨酸、17.6 g(0.2 mol)正戊醇、40 mL二甲苯和1.5 g的催化剂,电热套加热(105~110℃)回流反应2 h,酯化率可达93%。     

Binder effect on cycling performance of silicon/carbon composite anodes for lithium ion batteries

The cycling performance of a silicon/carbon composite anode has been significantly enhanced by using acrylic adhesive and modified acrylic adhesive as binder to fabricate the electrodes for lithium ion batteries. The capacity retentions of Si/C composite electrodes bound by acrylic adhesive and modified acrylic adhesive are 79% and 90% after 50 cycles, respectively. These two binders are electrochemically stable in the organic electrolyte in the working window. They also show larger adhesion strength between the coating and the Cu current collector as well as smaller solvent absorption in the electrolyte solvent than polyvinylidene fluoride (PVDF). Furthermore, sodium carboxyl methyl cellulose (CMC) plays an important role on improving the properties of acrylic adhesive, which increases the adhesive strength of acrylic adhesive and improves the activation of the electrodes.     

Advanced Sn/C composite anodes for lithium ion batteries

Metallic tin was deposited in fine particulate form on the surface of carbonaceous mesophase spherules (CMS) and in the pores of porous carbon by the decomposition and reduction of tin(II) 2-ethylhexanoate at 450 °C. The Sn/C composite powders obtained were used as anode materials for lithium ion cells. Electrochemical cycling tests of coin cells show that the dispersion of tin into the carbonaceous materials enhances the reversible capacity of the electrodes. The capacity retention at the 50th cycle is 91 % for Sn/CMS composite containing 22% tin, against 428 mAh g^–1 at the first cycle. With further increase in tin content, the capacity fade upon cycling is more rapid.     

Preparation and properties of water‐soluble polyester surfactants. II. Preparation and surface activity of silicone‐modified polyester surfactants

We prepared a novel series of water‐soluble silicone‐modified polyesters [poly(ethylene glycol) (PEG)–silicone polyesters] by reacting organopolysiloxane with a hydroxy‐terminated polyester. The polyesters were obtained by the polymerization of maleic anhydride and PEGs (molecular weights = 2000, 4000, 6000, 8000, and 10000). These water‐soluble PEG–silicone polyesters can be used as auxiliaries in dyeing process because they exhibit good surface activities such as surface tension, low foaming, and wetting power. The presence of these surfactants also retarded the rate of nylon dyeing with acid dyes. The retarding effect and low‐foaming property of these novel PEG–silicone polyesters make it possible for these surfactants to be used as leveling agents for modern nylon dyeing with acid dyes. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3005–3012, 2002     

A holistic approach to protein structure alignment

A method of protein structure comparison developed previouslyis extended to incorporate other aspects of protein structurein addition to the inter-atomic vectors on which it was originallybased. Each additional aspect, which included hydrogen bonding,solvent exposure, torsional angles and sequence, was introducedseparately and evaluated for its ability to improve alignmentquality. The components were then combined, suitably weighted,to produce a more holistic comparison method. The method wastested on a group of remotely related ß/ type proteinsthat share a common feature in their overall chain fold. Theresults indicated that while the original inter-atomic vectorcomponent was sufficient to give the correct alignment of mostpairs of topologically equivalent proteins, the inclusion ofhydrogen bonds, torsion angles and a measure of solvent exposureled to improvements in the more difficult comparisons. Considerationof amino acid properties, including hydrophobicity, had no beneficialeffect. The failure of the latter component was not unexpectedconsidering the almost total lack of sequence similarity amongthe proteins considered.     

Algal phagostimulants for marine herbivorous gastropods

Methanol extracts of the green algaUlva pertusa contain four kinds of glycerolipids that are active as feeding-stimulants for marine herbivorous gastropods. These compounds are digalactosyldiacylglycerol (DGDG), 1,2-diacylglycerly-4-O-(N,N,N-trimethyl)-homoserine (DGTH), 1-monoacylglyceryl-4'-O-(N,N,N-trimethyl)-homoserine (MGTH), and 6-sulfoquinovosyldiacylglycerol (SQDG). The various gastropods exhibit marked specificity, however, as young abaloneHaliotis discus respond to DGDG and DGTH at minute dosages of 20–30 g/sample zone, but do not respond to 300 g of SQDG, which is a phagostimulant for two other kinds of gastropods,Turbo comutus andOmphalius pfeifferi.Chemical Studies on Phagostimulants for Marine Gastropods. Part VI. For Part V, see Sakata et al. (1986b).     

废旧锂电池中有价金属回收及三元正极材料的再制备

探讨了磷酸体系下不同因素对废旧锂电池正极材料中有价金属浸出效率的影响，结果表明：在浸出时间60min，反应温度60℃，磷酸浓度2mol/L，液固比20mL/g，还原剂(H₂O₂)体积分数为4%时，可得最佳浸出效果，Co、Li、Mn、Ni浸出效率分别可达96.3%、100%、98.8%和99.5%；浸出液添加相应比例金属离子，采用草酸共沉淀法制备前体材料(Ni_1/3Co_1/3Mn_1/3)C₂O₄，并得到相应再生磷酸溶液。再生磷酸进行循环浸出实验，实验研究结果表明：循环浸出5次之后Li的浸出率仍可保持在90.1%，而Co、Mn和Ni的浸出率在75.0%以上。前体添加锂源Li₂CO₃煅烧合成Li(Ni_1/3Co_1/3Mn_1/3)O₂材料，考察了不同温度对Li(Ni_1/3Co_1/3Mn_1/3)O₂材料合成的影响，结果显示，当合成温度为800℃时，得到的材料性能最优良，初次放电容量可达136.4mA·h/g。在0.2C下经过50圈循环后容量保持率为97.2%。     

PEG1000强化钾盐催化硫醇β-羟乙基化反应

在常压、无溶剂条件下,以聚乙二醇(PEG)为相转移剂,钾盐为催化剂,碳酸乙烯酯(EC)和硫醇(RSH)为原料合成了β-羟乙基烷基硫醚(RSCH2CH2OH).系统考察了PEG对不同钾盐在RSH的β-羟乙基化反应中的固/液相转移作用以及EC用量对RSCH2CH2OH选择性的影响.通过GC和GC-MS计算与测定RSH转化率、RSCH2CH2OH选择性和副产物.结果表明,PEG本身没有催化活性,与单独加入0.5％(以RSH物质的量为基准,下同)K2CO3相比,同时加入1.0％PEG和0.5％K2CO3可显著提高RSH转化率和反应速率.PEG相对分子质量<1000时,PEG对K2CO3催化活性的强化作用随着PEG链长度的增长而增强.RSCH2CH2OH的选择性随着EC与RSH物质的量比(≥1.02)的增大而降低,副产物为乙烯基烷基硫醚和乙二醇.无溶剂条件下,PEG的加入能有效打破钾盐催化剂与液相反应物之间的相界面限制,增强钾盐催化活性,缩短反应时间,提高产品收率.     

基于气体穿透效果数值模拟的气体辅助注射成型工艺优化

对气体辅助注射成型工艺进行分析，阐述了气体辅助注射成型的关键技术要求在分析熔料流动、气体穿透物理模型的基础上，探讨了气体辅助注射成型数值分析的实现原理运用MPI／Gas模块对一T型支架进行了气体辅助注射成型CAE分析，模拟不同工艺条件下的气体穿透效果，确定了合理的工艺参数。