月形波导和加片圆波导的解析分析

采用模匹配方法分析了月形波导和加片圆波导的截止频率。波导中的场采用半数阶Bessel函数展开并令其满足边界条件,从而获得截止频率的特征方程国。根据本文所给公式可求解任意尺寸的月形波导、倒月形波导和加片圆波导的截止频率,并获得稳定的、具有高精度的解。     

Improved electrodeposition of CdS layers in presence of activating H2SeO3 microadditive

CdS thin films were deposited electrochemically onto indium tin oxide (ITO)/glass substrates from aqueous solutions containing 0.01 M CdCl₂, 0.05 M Na₂S₂O₃ and 0.02 M Edta-Na₂ at −1.2 mV versus saturated sulfate reference electrode. Depositions were carried out at various temperatures (20, 50 and 80 °С) and different pH (2.5, 3.5 and 4.5) in a three electrode electrochemical cell. All above mentioned electrochemical syntheses were reproduced in presence of H₂SeO₃ microadditive to compare resulted CdS layers. Electrodeposited CdS thin films were characterized by different instrumental techniques to know the influence of deposition conditions on the quality of the obtained layers. It was found that the presence of 0.05–0.5 mM of H₂SeO₃ in the electrolyte changes the mechanism of the CdS film formation that facilitates nucleation and a growth of a more dense and uniform polycrystalline CdS film. Addition of 0.5 mM of H₂SeO₃ into the initial solution allowed us to obtain nearly stoichiometric (sulfur content ~52 at%) CdS films at reduced temperature value of 50 °C vs. higher temperature values used in a conventional electrodeposition process of CdS layers. No Se-containing phases were detected by EDX, Raman and XRD analyses in the CdS films. The presence of H₂SeO₃ tends to rearrange polytype crystalline structure of CdS to more stable hexagonal structure. The band gap value of CdS was increased from 2.3 eV to 2.5 eV as a result of H₂SeO₃ addition.     

稀土添加剂对WC-Co硬质合金孔隙影响的研究

本文根据稀土强化碳化钨—钴硬质合金的实验事实，研究了稀土添加剂对WC－Co硬质合金孔隙度和孔隙尺寸的影响，对稀土添加剂在碳化钨—钴合金中的强化机理进行了探讨．结果表明：加入适当的稀土添加剂可使合金中的总孔腺度降低，较大的B类孔隙基本消失．     

Functionalization of microspheres with malonates using Michael Addition as a pathway to create a drug delivery system for platinum drugs for the treatment of liver cancer

Microspheres have been modified post-polymerization via Michael Addition to suit the requirement of these beads as a drug delivery carrier for platinum drugs. Ethyleneglycol dimethacrylate (EGDMA) was polymerized in a suspension system leading to microspheres with an excess of vinyl functionalities. Solid state NMR was employed to determine the amount of repeating groups with unreacted vinyl groups and a molar ratio of 28% was obtained. The percentage of vinyl groups was approximately confirmed using FT-Raman (34%). Subsequent Michael Addition of these vinyl functionalities with diethyl malonate leads to modification of almost half of the vinyl groups. Ester hydrolysis and reaction with cisplatin (cis-diammineplatinum(II) dichloride) lead to microspheres with a loading of around 9 wt% of platinum. The platinum drug was slowly released at a rate of 20% in 10 days making these microspheres suitable for the treatment of liver cancer via transarterial chemoembolization. Indeed, the drug-loaded carrier was found to be highly toxic to liver cancer cells (ATCC, HepG2) while the empty carrier is non-toxic.     

釜内添加助剂法制备可直接加工的高分子量HDPE粉料

采用釜内添加助剂技术及模拟串联聚合工艺制备了可直接加工成型的HMWHDPE粉料,考察了不同助剂添加方式及添加量催化剂活性、相对产率、HMWHDPE粉料的热氧老化性能、力学性能和加工性能的影响,结果表明,PZ－120、BCH催化剂所生产的粉料流动速度慢,细粉度高,TK催化剂是目前生产HMW HDPE较好的催化剂,针对TK催化剂,采用聚合前与延迟添加助剂的B的工艺,所得HMWHDPE的热氧化诱导期大于27min,热老化时间大于120d,缺口冲击强度632J/m,耐环境应力开裂3000h,明显优于8200B料。     

Effects of Cr2O3 addition on property improvement of magnesia-spinel refractories used in RH snorkel

The Ruhrstahl-Heraeus (RH) snorkel is one of the most important parts of the RH furnace, which is the primary facility for producing high-quality steel. The magnesia-spinel refractory is the ideal replacement for the classic magnesia-chrome refractory in the RH snorkel. In this study, the effects of Cr₂O₃ addition (0–3 wt%) on properties of magnesia-spinel refractories were investigated. It was found that the addition of Cr₂O₃ results in the acceleration of the densification process and a decrease in the cold strength as well as a significant increase in the hot modulus of rupture. Thus, the solid solution formed with the spinel significantly improves the resistance to thermal shocks, with the greatest improvement being observed after the addition of 2 wt% Cr₂O₃.     

乙硫氮作捕收剂时无机调整剂加药顺序对典型硫化矿物浮选的影响

研究了乙硫氮作捕收剂时无机调整剂硫酸锌、亚硫酸钠、硫化钠和硫酸铜不同加药顺序对典型硫化矿物黄铜矿、方铅矿、闪锌矿和黄铁矿浮选行为的影响.结果 表明,调整剂与捕收剂的加药顺序对硫化矿物浮选的影响不同.与调整剂先加时相比,乙硫氮先加,硫酸锌对黄铜矿和方铅矿浮选的抑制作用减弱;硫酸锌、低用量硫酸铜、亚硫酸钠或硫化钠对闪锌矿浮...     

The alkyl glycidyl ether as synthetic building blocks

Alkyl glycidyl ether is one of the most useful key materials for industrial applications because the addition reaction of various kinds of nucleophilic reagents to the reactive epoxy bond of the glycidyl ethers has led to glyceryl ether derivatives. Glyceryl ether exhibits many interesting physical and pharmacological properties. The alkyl glycidyl ether can presently be produced at an industrial scale under the phase-transfer catalytic Williamson ether synthesis. We have reviwwed some addition reactions of the alkyl glycidyl ether and possibilities for use as the building blocks for the syntheses of surfactants, pharmaceuticals, etc. that contain glyceryl ether skeletons. Typical examples of alkyl glyceryl ether derivatives include: amino ether as cosmetic material, and isodiglycerin mono- and dialkyl ethers and triglycerin monoalkyl ether as a cosmetic or a pharmacologically useful material, respectively. Another interesting reaction is the rearrangement of the epoxy bond of the alkyl glycidyl ether, which gives alkoxy ketone in a one-pot synthesis.     

Effect of Brazing Conditions on Microstructure and Mechanical Properties of Al2O3/Ti--6Al-4V Alloy Joints Reinforced by TiB Whiskers

Al2O3 and Ti-6Al-4V alloy were brazed with Ag-Cu-Ti ＋B fillers in different brazing conditions. Effects of brazing temperature, holding time and additive Ti content on joints microstructure and shear strength were investigated by scanning electron microscopy, energy dispersive spectrometry, X-ray diffraction, transmission electron microscopy and shear testing. Results indicate that TiCu and Ti（Cu,Al） decrease, but Ti2Cu and -Ti2（Cu,Al） increase in brazing seam with increasing brazing temperature, holding time and additive Ti content. Area consisting of Ti3（Cu,Al）30 and TiO near Al2O3 becomes gradually discontinuous from continuity when brazing temperature rises or holding time extends. As Ti additive content increases, TiO is absent near Al2O3, area consisting of only Ti3（Cu,Al）30 thickens. TiB whiskers are in situ synthesized by Ti and B atoms during brazing process. The brazing temperature, holding time and additive Ti content on joints microstructure influence the joints shear strength directly. The shear strength of joints, obtained at 850 ℃ holding for 10 min, reaches the maximum of 78 MPa. According to the experimental results, phase diagram and thermodynamics calculation, the interface evolution mechanism of the Al2O3/Ti-6Al-4V alloy joint was analyzed.     

Effect of addition time of a superplasticizer on cement adsorption and on concrete workability

The effect of addition time of a naphthalene-based superplasticizer (SNF) on the adsorption behavior on type I Portland cement slurries and on the concrete workability was studied. Test results indicate that the adsorption behavior of SNF on cement particles follows a Langmuir isothermal adsorption model. As the addition time increases, the saturated adsorption amount of SNF decreases sharply at the beginning and then more slowly. In comparison, the concrete workability decreases slightly in the early phase and then falls off abruptly. Most importantly, the transition points in both cases appear to be the same, at about 10–15 min. This strongly suggests that a close relationship exists between the SNF adsorption behavior on cement particles and the workability of concrete. In addition, the optimum addition time of SNF to concrete should be in this period, which corresponds to the beginning of the dormant period of the cement hydration process.