试验条件对钨铬铸渗层冲击磨损性能的影响

采用传统的铸渗工艺在铸钢件表面制备了钨铬复合层,采用MLD-10型动载磨料磨损试验机研究了试验条件对表面复合材料冲击磨损性能的影响.结果表明:随着冲击次数的增加,表面复合材料的磨损率逐渐增加,但在比较长的时间内,没有出现剧烈磨损和突然失效现象,显示出良好的耐磨性;随着冲击功的增加,复合材料的磨损率增加.     

外场处理对低合金钢焊接接头组织和性能的影响

研究了电磁搅拌、氩弧表层处理、超声喷丸处理对低合金钢焊接接头组织和性能的影响。结果表明 :电磁搅拌促进奥氏体晶粒内针状铁素体生成和细化 ,使针状铁素体的含量由 85%提高到 92 % ,从而提高了焊缝金属的韧度。氩弧加热处理使焊缝表层发生熔化和重结晶 ,可消除焊缝表层的柱状晶 ,处理后的组织主要由针状和细晶铁素体组成。对接头焊趾部位进行氩弧快速重熔处理可消除焊趾部位的几何截面突变 ,使焊缝与母材圆滑过渡 ,有利于消除焊趾部位的应力集中 ,对抗应力腐蚀性能十分有益 ;焊趾部位热影响区中粗大的晶粒细化。表面高能喷丸处理使焊接接头表面层形成尺寸均匀的等轴状纳米晶 ,不仅提高了表层的硬度 ,而且可使焊接接头的疲劳强度提高 50 %。     

Suspended electrode kinetics of mechanically activated pyrite

1　ＩＮＴＲＯＤＵＣＴＩＯＮＭｅｃｈａｎｉｃａｌａｃｔｉｖａｔｉｏｎｉｓｗｉｄｅｌｙａｐｐｌｉｅｄｉｎｅｎ ｈａｎｃｉｎｇｍｅｔａｌｌｕｒｇｉｃａｌｐｒｏｃｅｓｓ[1～ 3] ａｎｄｃｈｅｍｉｃａｌｓｙｎ ｔｈｅｓｉｓ[4 ,5] .Ｓｏｆａｒｉｔｉｓｄｉｆｆｉｃｕｌｔｔ     

废旧机械产品再制造的资源环境评价*

再制造不仅延续了产品的寿命周期,而且具有巨大的资源环境效益.通过简式寿命周期评价矩阵中有关元素的分析、钢铁原材料生产过程的环境负荷分析、机械产品（零部件）原始制造与再制造中的环境负荷分析,表明再制造产品的资源环境优势集中体现在其原料获取和产品生产阶段.零件再制造主要使用各种表面技术对局部失效表面进行修复与强化,免去了其原始制造中金属材料生产、毛坯生产的全部及后续切削加工、材料处理中的大部分资源、能源消耗和废弃物排放,其相应总量比原始制造一般低1～2个数量级,整个产品再制造的资源环境效益随新品零件替换率的提高而降低.     

微波作用下铝酸钙炉渣非等温浸出动力学

研究了微波作用下铝酸钙炉渣非等温浸出动力学，考察了不同微波辐射功率对炉渣中氧化铝浸出率的影响以及相应微波功率下反应体系温度随时间的变化规律。结果表明：该浸出动力学过程的控制步骤为界面化学反应控制，表观反应活化能为40kJ／mol左右；微波作用可改变反应的频率因子，对反应活化能影响不明显；随着微波辐射功率的增大，频率因子增加，宏观表现出微波功率的增加对反应有促进作用。     

Effect of surface free energy of ceramic glaze on oil droplet shape and its behavior in water

A super-hydrophilic functional ceramic was prepared by adjusting the chemical components of ceramic glaze. Effect of surface flee energy of ceramic glaze on oil droplet shape and its behavior in water were studied. The results show that water can spread on ceramic surface with high surface free energy, and oil droplet can aggregate rapidly and separate from the ceramic surface in water. For the ceramic with lower surface free energy, the polar shares are dependant on its easy-cleaning property. The higher the polar shares, the better the easy-cleaning property, and the easier the droplet separates from the ceramic surface in water.     

Flow behavior and microstructure evolution of TB8 alloy during hot deformation process

Hot compression tests of metastable β titanium alloy TB8 were carled out using a Gleeble-1500 thermal simulation testing machine in the temperature range of 750-1 100 ℃, at constant strain rate from 0.01 s^-1 to l S^-1 and with height direction reduction of 60%. Flow stress behavior and microstructure evolution during hot compression of TB8 alloy were investigated. The hyperbolic-sine-type constitutive model of TB8 alloy was obtained to provide basic data for determining reasonable forming process. The results indicate that hot deformation behavior of TB8 alloy is highly sensitive to the temperature and strain rate. An analysis of the flow stress dependence on strain rate and temperature gives a stress exponent of n=3.416 19 and a deformation activation energy of Ω=227.074 4 kJ/mol. According to the deformation microstructure, no dynamic recrystallization happens below r-phase transus temperature and as a result dynamic recovery is the predominant softening mechanism. On the other hand, the main softening mechanism is characterized as dynamic recrystallization at a slow strain rate above r-phase transus temperature.     

铵盐浸渍预处理对活性炭性能的影响

以除尘灰分离炭粉为原料，采用化学物理活化法制得活性炭。研究了铵盐浸渍预处理对活性炭特性的影响，讨论了比表面积对活性炭吸附性能的影响。结果表明，铵盐浸渍可以明显提高活性炭的比表面积，当浸渍比为2：1时，用除尘灰制得活性炭的比表面积最大值达1191．8m^2/g，且其合适的孔结构可以提高对二甲苯的吸附能力。对铵盐浸渍预处理的活化机理作了初步探讨。     

CuxAlO2(0.92≤x≤1.0)陶瓷电输运性能

使用高温固相烧结法制备不同化学剂量比的CuAlO2陶瓷,研究CuxAlO2(0.92≤x≤1.0)中Cu、Al摩尔比的相对变化对其结构和导电性能的影响.结果表明:CuxAlO2(0.92≤x≤1.0)陶瓷片的结构和密度随着x值的增大,样品的结晶性逐渐变好,密度也逐渐增大,在x为0.98时,得到密度最大(5.02 g/cm3)且结晶良好的纯相CuAlO2;样品的光学带隙均约为3.44 eV;随着x值的增加,室温电导率先增大然后减小,在x为0.98时得到最大电导率为8.03×10-3 S/cm;电导率随温度的升高而显著增大,且曲线在100～300 K之间很好地符合Arrhenius关系,x为0.98时激活能最低,仅为0.085 eV;在所研究的成分范围内,CuAlO2陶瓷的导电能力主要取决于陶瓷片的致密度.     

DFT research on activation of sphalerite

Activation of sphalerite ZnS, (Zn, Fe)S, (Zn, Cu)S were carried out using the density functional theory (DFT) method. The electronic structures and related properties of three kind of zinc sulfide compounds were investigated. In addition, the relation between electronic structure and flotation behavior was discussed. The results show that, ZnS has a broader band gap than (Zn,Cu)S and (Zn,Fe)S do, and it has low electrochemistry activity to react with flotation collectors to render the surface hydrophobic. When the Zn atom in ZnS is replaced by Cu atom,the band gap will be reduced, and the top valence band will be occupied by Cu 3d orbit, thus it is beneficial to the interaction between mineral surface and collector.