台北101层国际金融中心之结构施工技术与其设计考量概述

本文旨在简要说明目前正在施工中之超高层大楼—台北国际金融中心之结构系统、钢结构工程、钢筋混凝土工程基础与深开挖工程等特殊施工技术,并佐以相关之设计考量与施工规划概要,以供工程界做参考。     

面向大批量定制生产的产品族设计技术综述

随着市场竞争的日益激烈,传统的大批量生产和单一的定制生产模式在激烈的市场竞争中已失去竞争优势,大批量定制生产模式,已成为制造业发展的必然趋势,它试图将大批量生产的高效率、低成本与定制生产灵活性、个性化的优势结合起来。开展产品族设计是实现大批量定制生产的有效途径。论述了大批量定制生产与产品族设计的关系,并对国内外有关产品族设计的文献进行了系统的整理和归类,提出了产品族设计系统框架,且对产品族设计的实现方法进行了介绍。     

湿硫化氢环境下的球罐腐蚀状况分析

在湿硫化氢环境下 ,尤其储存介质中的硫化氢含量超标时 ,很容易对储存容器壳体 (含焊缝和母材 )造成硫化氢应力腐蚀或氢鼓包。作者较仔细分析了 1 0 0 0m3 丙烯球罐产生硫化氢应力腐蚀开裂和40 0m3 LPG球罐产生氢鼓包的原因。提出了此类设备在设计选材、设备制造、施工安装和使用维护等环节应注意的问题。     

7-羟基全氢化噁唑并噁嗪鞣剂的合成及其鞣性研究

报导了新型鞣剂 7-羟基全氢化唑并嗪 (以下简称 OX- Z)的合成方法。试验确定合成的最佳条件为 :在氮气保护下 ,将等摩尔量的二乙醇胺在 10℃水浴中缓慢滴入乙二醛中 ,滴加时间 0 .5 h,在 2 0℃水浴中继续反应 1.5 h,产率为 6 2 .9%。 OX- Z对浸酸绵羊皮单独鞣制 ,可使收缩温度升高到 87℃。最佳鞣制条件为 :p H10 .0 ,OX- Z用量 5 % ,鞣制时间 8h。在对 OX- Z与皮胶原的结合类型的研究中证明它们之间是以化学键结合的。     

C/O能谱测井数据预处理的两点改进意见

简单介绍了碳氧比测井的原理及通常的数据处理方法。分析了由常规数据处理所得曲线仍然存在的问题及可能的成因 ,并给出了可行的修正办法。讨论了另一种可行的曲线异常数据的检测、剔除方法。实践表明 :文章讨论的两点建议都是可行的 ,并且在提高测量曲线质量的同时也提高了地层含油饱和度的解释精度。     

Transporters in the neurohypophysial neuroendocrine system, with special reference to vesicular glutamate transporters (BNPI and DNPI): a review.

Recent advances in gene technology have helped to identify novel proteins and allowed study of their distribution and functions in the mammalian brain. One class of these proteins is that of transporters, which exist in plasma and organellar membranes of neurons and other cells to move substances selectively across membranes. These transporters can be categorized further into subclasses by their structural property, substrate selectivity, and site of action. Some of them have been identified in the hypothalamus, which is the only brain site where a neural signal is converted to a humoral one, namely, a hormone for a target organ. This unique neural mechanism has long attracted attention as the neuroendocrine system, part of which has been extensively studied as the hypothalamic-neurohypophysial system involved in secretion of vasopressin and oxytocin. However, transporters in this system have been less well studied. A morphological examination of novel transporters would give us cues to a better understanding of the neuronal organization and function of the system. In this review, we first summarize recent findings on expression of transporter gene and immunoreactivity in the hypothalamus. In the second part, we explain our observations on two vesicular glutamate (inorganic phosphate) transporters (BNPI and DNPI) in the supraoptic and paraventricular nuclei and neurohypophysis. Further study of these and other transporters will provide a basis on which to reevaluate the organization and function of the hypothalamic-neurohypophysial system.     

The influence of the fabrication process on the buckling of thin-walled steel box sections

Steel box sections are usually fabricated from flat plates which are welded at the corners. The welding process can introduce residual stresses and geometric imperfections into the sections which can influence their strength. For some thin-walled sections, large periodic geometric imperfections have been observed in manufactured sections. Subsequent investigations have indicated that the imperfections are in fact buckling deformations i.e. the box section has buckled due to welding residual stresses prior to any application of external load. The welding procedure and the behaviour of the box sections under load has been modelled using a finite element analysis that accounts for both geometric and material non-linearities. Tests have been carried out on box sections with a range of width to thickness ratios for the plate elements. Modelling has been shown to give good correlation with the test results. The conditions for buckling to take place as a result of the welding process have been established. A design method has been proposed.     

Trypsin Inhibitor Activity In Vitro Digestibility and Sensory Quality of Meat-Like Yuba Products as Affected by Processing

ABSTRACT: :
Soybeans ( Glycine max ) were soaked and ground to obtain soymilk. The soymilk was cooked in an open tank and held at 85 to 90 deg;C. Yuba films were picked up in 20 min intervals and dried for 20 min. Yuba films were soaked in chicken-flavor solutions (25% and 35%), and baking soda (BS) solutions (0%, 1%, 2%, and 3% BS), and cooked at 100 °C for 30 min, 60 min, and 90 min. TIA decreased (p < 0.05) with the increase of heating time and BS concentration. In vitro protein digestibility (IVPD) decreased with heating time and BS concentration (p < 0.05). Sensory characteristics were affected by flavor concentration. By using 0% BS, 25% of the chicken flavor concentration, and a short heating time method, meat-like products with low TIA, high IVPD, and good sensory characteristics were obtained.     

应用德国PAR88挤出机生产PVC异型材的工艺研究

从控制PVC异型材挤出机的工艺参数的角度，分析并论述了挤出机工艺参数对PVC异型材低温落锤性能的影响。     

薄板坯连铸工艺液芯压下的有限元分析

简要介绍世界几种主要薄板坯连铸工艺。着重叙述应用大型通用商业软件MSC.MARC。模拟液芯压下时铸坯的变形，确定最佳压下方案的有限元分析，液芯压下应该在结晶器出口处及二冷区扇形段开始部分进行，这样能减小铸坯的应变。