Roll‐to‐roll UV embossing process applied for light bar‐based sub‐wavelength gratings for backlight

This study proposes a roll‐to‐roll process‐based sub‐wavelength grating, which is attached on a light bar to turn the side‐lit red/green/blue (620, 520, and 450 nm) incident rays into a uniformly and normally output white light with high illuminance from the light bar's surface. On the basis of the rigorous coupling wave analysis, the relationship between the first‐order transmission/reflection efficiency and the pitch of the gratings with different shapes was analyzed. The optimal design can effectively reduce the coupling length and enhance the white color balance for display applications.     

Thermal diffusivity of fluids in a broad region around the critical point

Dynamic light scattering is a suitable method for the investigation of transport properties such as the thermal diffusivity of optically transparent fluids. The main advantages of the method are its quickness, the fact of the thermodynamic state of equilibrium of the sample (gradients are not required), and the relatively simple evaluation of data without the necessity of calibration. However, an insufficient production of intensity of scattered light may be a limiting effect. For that reason the vicinity of the gas-liquid critical point represents the classical range of application. In this paper, it is shown that by means of an appropriate choice of experimental apparatus, measurements are also feasible in an extended range of states. Broad regions around critical points of three pure fluids (sulfur hexafluoride, SF₆; ethane, C₂H₆; nitrous oxide, N₂O) over temperature ranges ¦T-T _c¦ of 0.02 to 50 K and density ranges (/_c) of 0.2 to 2 were investigated. In this region the thermal diffusivity shows great variations with temperature and density and cannot be described by means of ideal-gas behavior or relations for liquids. The measurements were carried out along the coexistence curve for both phases, along the critical isochore and along some isotherms with TT _c. The measured or calculated density, pressure, and thermal diffusivity data as well as some correlations are presented.     

一种联合采样的神经网络光场

相比传统的光场绘制技术,神经网络光场(NeRF)方法可使用神经网络拟合场景的光线采样,将隐式编码输入图片的光场,合成新视图. 针对NeRF方法训练时间长,绘制视图慢的问题,提出了一种基于联合采样的NeRF方法,通过使粗糙网络和细腻网络共享均匀采样结果的方法,减少了不必要的光线采样,从而加快了网络训练和视图合成的速度. 实验结果表明,在取得近似视图合成质量的情况下,与NeRF方法相比,所提方法的训练时间减少了20%,视图合成的效率提高了25%.     

Photocatalytic syngas synthesis from CO2 and H2O using ultrafine CeO2-decorated layered double hydroxide nanosheets under visible-light up to 600 nm

The rational design of photocatalyst that can effectively reduce CO₂ under visible light(l>400 nm),and simultaneously precise control of the products syngas(CO/H2)ratio is highly desirable for the Fischer-Tropsch reaction.In this work,we synthesized a series of CeO₂-decorated layered double hydroxides(LDHs,Ce-x)samples for photocatalytic CO₂ reduction.It was found that the selectivity and productivity of CO and H₂ from photoreduction of CO₂ in conjunction with Ru-complex as photosensitizer performed an obvious“volcano-like”trend,with the highest point at Ce-0.15 and the CO/H₂ ratio can be widely tunable from 1/7.7 to 1/1.3.Furthermore,compared with LDH,Ce-0.15 also drove photocatalytic CO₂ to syngas under 600 nm irradiation.It implied that an optimum amount of CeO₂ modifying LDH promoted the photoreduction of CO₂ to syngas.This report gives the way to fully utilize the rare earth elements and provides a promising route to enhance the photo-response ability and charge injection efficiency of LDH-based photocatalysts in the synthesis of syngas with a tunable ratio under visible light irradiation.     

Efficient photodegradation of phenol assisted by persulfate under visible light irradiation via a nitrogen-doped titanium-carbon composite

To realize the utilization of visible light and improve the photocatalytic efficiency of organic pollutant degradation in wastewater, a nitrogen-doped titanium-carbon composite (N-TiO₂/AC) prepared by sol-gel methods was applied in the photodegradation of phenol assisted by persulfate under visible light irradiation (named N-TiO₂/AC/PS/VIS). The results show that a synergistic effect exists between visible-light photocatalysis and persulfate activation. Compared with TiO₂/PS/VIS, the phenol degradation rate was found to be observably improved by 65% in the N-TiO₂/AC/PS/VIS system. This significant increase in degradation rate was mainly attributed to the following two factors: 1) The N and C doping can change the crystal structure of TiO₂, which extends the TiO₂ absorption wavelength range to the visible light region. 2) As an electron acceptor, PS can not only prevent electrons and holes from recombining with each other but can also generate strong oxidizing radicals such as ∙SO₄^– and ∙OH to accelerate the reaction dynamics. The process of phenol degradation was found to be consistent with the Langmuir pseudo-first-order kinetic model with an apparent rate constant k of 1.73 min^–1. The N-TiO₂/AC/PS/VIS process was proven to be a facile method for pollutant degradation with high pH adaptability, excellent visible-light utilization and good application prospects.     

Regulatory Light Chains in Cardiac Development and Disease

The role of regulatory light chains (RLCs) in cardiac muscle function has been elucidated progressively over the past decade. The RLCs are among the earliest expressed markers during cardiogenesis and persist through adulthood. Failing hearts have shown reduced RLC phosphorylation levels and that restoring baseline levels of RLC phosphorylation is necessary for generating optimal force of muscle contraction. The signalling mechanisms triggering changes in RLC phosphorylation levels during disease progression remain elusive. Uncovering this information may provide insights for better management of heart failure patients. Given the cardiac chamber-specific expression of RLC isoforms, ventricular RLCs have facilitated the identification of mature ventricular cardiomyocytes, opening up possibilities of regenerative medicine. This review consolidates the standing of RLCs in cardiac development and disease and highlights knowledge gaps and potential therapeutic advancements in targeting RLCs.     

重芳烃轻质化催化剂n（Ni）/n（Ni+Mo）的优化与分析

以β分子筛为载体,在保持金属总负载量不变的情况下,采用等体积浸渍法制备了4种不同n（Ni）/n（Ni+Mo）的催化剂。分别采用X射线衍射（XRD）、比表面积测试（BET）、氨程序升温脱附（NH₃-TPD）、氢程序升温还原（H₂-TPR）、氢程序升温脱附（H₂-TPD）和热重-差热分析（TG-DTG）等方法对催化剂进行了表征。结果表明,4种催化剂的酸量和酸强度相近,在n（Ni）/n（Ni+Mo）等于基准+0.2时,Mo与载体之间的相互作用最弱,其氢气吸附量最多且积炭量最少;采用某炼厂重整C₁₀⁺ 重芳烃对4种催化剂进行评价,结果表明n（Ni）/n（Ni+Mo）等于基准+0.2催化剂具有最优的催化活性和稳定性。上述结果表明,影响重芳烃轻质化催化剂活性和稳定性的关键因素是催化剂氢气吸附量的多少,氢气吸附量越多金属表面的溢流氢效应越明显,积炭前驱体被溢流氢及时消除,从而保护了催化剂的加氢活性中心不被积炭覆盖,有助于催化剂在较高活性下保持稳定。     

Fluorescent lamp promoted formaldehyde removal over CeO2 catalysts at ambient temperature

Exploring an alternative strategy with high efficiency and low cost to abate formaldehyde (HCHO) in indoor environment, is of increasing significance for people's health. CeO₂ catalysts prepared by hydrothermal, precipitation and calcination methods were investigated for HCHO removal at ambient temperature. It is found that indoor fluorescent light visibly boosts the catalytic performance of CeO₂ catalysts for HCHO decomposition at ambient temperature. Among the CeO₂ catalysts, CeO₂ prepared from hydrothermal method (CeO₂–H) exhibits a superior catalytic performance and an excellent durability by eight recycle times. Based on the characterization and analysis, the excellent catalytic performance of CeO₂–H is mainly contributed by its abundance of surface oxygen vacancies, and photogenerated electrons and hole activated by fluorescent light. This work shows a potential practicability in HCHO pollution elimination by taking full advantage of the existing lighting in indoor environments.     

Accu Roll轧管机的背景、现状及前景

对Accu Roll轧管机的产生背景进行了回顾,对目前国内Accu Roll轧管机的使用现状进行了分析,在肯定其优点的同时,指出了该类轧管机存在的共同问题,提出了完善轧管机性能的可能途径及选择轧管机应注意的问题。