新型合金代铬刷镀层的组织及强化机理的研究

采用Ｘ射线衍射仪，透射电镜和扫描隧道显微镜等手段对新型代铬镀层（Ｎｉ－Ｆｅ－Ｗ－Ｐ－Ｓ）相结构及组织进行了研究，并初步探讨了镀层的强化机理。研究表明，Ｎｉ－Ｆｅ－Ｗ－Ｐ－Ｓ合金镀层的组织是由含Ｆｅ、Ｗ、Ｐ、Ｓ的镍基固溶体和在其上弥散分布的金属间化合物Ｎｉ_３Ｆｅ所组成，镍基固溶体处于非晶和微晶的混合状态，合金镀层的镀态硬度为ＨＶ７００～７５０，在３００℃退火时。硬度达到最大值ＨＶ９００～９５０，其强化机理主要是微晶的晶界强化和Ｎｉ_３Ｆｅ的弥散强化。     

快速钨铼热电偶的测温误差

本文用热电偶误差计算的通用方法（极限误差表达法）分析了构成快速钨铼热电偶测温误差的因素，从量的角度探讨了各因素对总的误差的影响，对如何认识快速钨铼热电偶的测温精度，提出了可供参考的观点。     

渣对钢液温度的影响

开发了渣表面散热模型，定量分析了渣层内温度变化规律，以及表面散热情况，比较了模型计算结果与大冶钢厂现场实测值，指出保证５０ｍｍ的渣层厚度有利于减少钢液温度损失，开发的模型可作为钢液温度控制的一部分指导现场生产。     

Evaluation of different coating systems by electrochemical methods

Corrosion protection of organic coated steel is determined by free corrosion potential measurements and impedance spectroscopy. The results are classified by means of very basic considerations and evaluation figures are developed. These electrochemical data are correlated with the extent of the corrosion for each coating system. The evaluation figures are used for ranking coating systems and this ranking is correlated with the ranking with reference to the results of standardized and exposure tests.     

炉外精炼过程中炉渣的有效控制

对连铸机浇铸之有前钢水的炉外处理技术，尤其是对炉渣的控制进行了研究，从而使钢的纯净度和连铸可浇性大大提高。     

GCr15控制轧制新工艺的模拟研究

用热扭转试验机，实现了热变形模拟轴承钢控制轧制工艺。研究了形变过程中所发生的静态和动态软化过程，观察了形变后的组织，证实在生产过程中实现的可能性，为在生产中推广使用提供了科学依据。     

Stress concentration and fatigue of profiled reinforcing steels

Stress concentrations arise from profiles of ribbed reinforcing steel bars and in this study the results of calculated stress concentration factors (SCF), by using finite element method, are related to the fatigue test results. It is apparent that the degree of confinement of a ribbed bar embedded in concrete not only affects the magnitude of the ultimate bond stress but also the bond stress-slip relation. Thus the rib geometry or profile pattern is designed for optimum bond characteristics and not for fatigue considerations. However the rib geometry influences the fatigue performance through the SCFs arising from the root radius, width and flank angles of the profiles. It is shown that these latter factors have a significant influence on the fatigue behaviour of reinforcing steel bars.     

S7-200在KYS-1500/50型打捆机中的应用

采用西门子S7-200系列PLC设计电气控制系统,成功实现打捆机系统的自动控制,满足了生产的工艺要求。     

用LG55冷轧管机轧制小直径不锈钢管孔型改进

介绍了ＬＧ５５冷轧管机使用Φ７～３２ｍｍ、Φ５０～３２ｍｍ孔型轧制小直径不锈钢管的工艺特点。试验表明，两种孔型可行，且Φ５７～３２ｍｍ孔型的综合使用效果更好。     

提高Cr12MoV钢冷作模具寿命的措施

从原材料改锻、预备热处理、淬火及回火、深冷处理、表面强化处理等方面分析介绍了提高Cr12MoV钢冷作模具寿命的一些方法和措施 ,并通过实例表明 ,采用这些方法和措施可较大幅度地提高模具寿命