深层搅拌桩复合地基的现场试验研究

结合雍六高速公路长江二桥江北接线工程 ,对填土荷载下复合地基的应力、变形特性进行了长期现场观测研究 .结果表明 :路基经深搅桩加固后 ,沉降变形得到有效控制 .加固区沉降量较小 ,下卧层沉降量较大 ,总沉降量满足设计及规范的要求 ;柔性路堤下桩与桩间土的沉降规律有差别 ,桩身上部桩周土沉降较大 ,随着深度增加 ,桩周土沉降逐渐小于桩的沉降 ,在这个过程中 ,桩与桩周土存在等沉面 ;在填土加荷过程中 ,桩与土各自分担的应力处在动态的变化之中 :加荷时 ,桩上应力相对集中 ;间歇期 ,桩土应力比减小 ;体现了荷载传递过程中桩与土是相互协调作用的     

Mashing of rice with barley malt under non-conventional process conditions for use in food processes

Non-conventional mashing conditions are relevant in the development of a lactic acid-fermented soymilk beverage where mashed rice is the source of carbohydrates for the fermentation and sweetness of the beverage. Advantages in the process layout could be achieved by mashing at higher pH and lower malt concentrations than normally used in the brewing industry. the work reported here assessed the consequences of mashing under non-conventional conditions. Malt concentration in the cereal part was varied from 25% to 70% (w/w), pH was varied within 5.3 to 7.1, and prolongation of the holding times at 50°C and 62°C was investigated. Regression equations have been established for predicting yields of soluble protein, low molecular weight sugars and total fermentability as functions of pH and malt concentration. the results showed that the maltose yield was constant while glucose, maltotriose and total fermentable sugar yields decreased slightly with increasing pH and decreasing malt concentration. Prolonged mash holding times at 50°C and 62°C gave minor increases in protein yields only. It is concluded that it is quite acceptable to use non-conventional mashing conditions when a mashing step is integrated in other food processes.     

蒸发式冷凝在制冷工艺上的应用

分析对比制冷工艺中几种冷凝方式，指出发展蒸发式冷凝技术对制冷系统节能的重要意义；通过分析蒸发式冷凝的换热机理，在试验和实践的基础上讨论了影响蒸发式冷凝器性能的几个重要因素。     

烟气轮机长周期高负荷运行的途径和方法

北京燕山分公司2000kt/a催化裂化装置的烟气轮机机组,在投运的几年内,存在电仪故障多、气轮机轴振动大及回收率低等一系列问题。通过技术攻关及操作优化,烟气轮机的轴振动值最大不超过70μm,发电量提高至13000kW·h以上,每年停机检修的时间可控制在15天以内,全年的净收效益将达到5460万元,每年可提高效益1620万元。与装置同步运转率由2004年的87%提高到96%,显著提高了经济效益和社会效益。     

催化部分氧化法制氢的水碳比控制与探讨

简要介绍了国内少有的干气催化部分氧化转化制氢工艺,重点讨论了转化水碳比的控制条件,对降低水碳比操作进行了有益地探讨。     

新型阳离子聚合物NCP的合成及应用

介绍了用高分子反应法在固态条件下合成高阳离子度阳离子聚合物NCP的方法,确定了其最佳反应条件,测定了聚合物阳离子度和反应效率.采用L9（34）正交试验法得出合成NCP的最佳反应条件为：聚合物与阳离子化试剂质量比为11：3;催化剂用量为1.072%,反应时间为2.5 h;反应温度为80℃.实验结果表明,在反应体系中加入催化剂和少量有机或无机溶剂可显著提高反应速率和效率;使用少量润湿剂,可最大限度地限制副反应,造成反应部位的局部浓度高,提高反应效率.阳离子聚合物NCP可作为增粘降滤失剂用于配制正电性钻井液,效果优良,且耐温性能良好,同时基于阳离子与阴离子聚合物在溶液中生成凝胶状沉淀物的特性,NCP还可用于解决注聚区块生产井产出水中含高浓度聚合物的问题.     

Phase equilibria of quasi-binary systems consisting of multicomponent polymers 1 and 2. IV: Poly(ethylene oxide)/poly(propylene oxide) systems

To confirm the reliability of the theory of phase equibria of multicomponent polymer 1/multicomponent polymer 2 systems (i.e. quasi-binary systems) and the method of computer experiment based on this theory (Brit. Polym. J., 23 (1990)285; 23 (1990)299; Polym. Int., 29 (1992)219), could point curves (CPC), two-phase volume ratios ( R ) and critical solution points (CSP) have been determined experimentally for the quasi-binary mixtures of poly(ethylene oxide) (M¯_w = 647, M¯_w/M¯_n = 1.15; M¯_w and M¯_n, the weight-average and numberaverage molecular weights, respectively) and poly(propylene oxide) (M¯_w = 2028, M¯_w/M¯_n = 1.08; and M_w = 2987, M_w/M_n = 1.13). The hydroxyl end groups of both polymers were methoxylated in advance by the Cooper & Booth method (Polymer, 18 (1977)164). The thermodynamic interaction parameter between both polymers, χ₁₂, and the concentration dependence parameters for the above quasi-binary systems were determined by the method proposed in a previous paper (Brit. Polym. J., 23 (1990)299). CPC, R and CSP values calculated on the basis of the theory are in good agreement with the values determined experimentally.     

放射性核素迁移的实验室研究——Ⅱ.用混合裂变产物溶液研究核素在地质材料上的吸附

应用裂变产物混合物做为示踪剂研究了~(137)Cs,~(141,144)Ce,~(103,106)Ru,~(103,106)Ru,~(95)Zr,~(95)Nb,~(89,90)Sr在花岗岩、凝灰岩、页岩上的吸附行为。应用批式技术测定了吸附比。核素的γ放射性是用连有SCORPIO-3000多道计算机系统的Ce(Li)探测器测量的。β放射性~(89,90)Sr是放化分离后在G-M计数器上测量的。结果表明:凝灰岩、页岩能强烈吸附Ce,Nb,Zr;吸附Cs居中;吸附Sr,Ru较差;花岗岩的吸附性能都差。     

Synthesis of diamond crystals and films using an oxygen-acetylene flame under atmosheric pressure

Diamond growth with rates up to 100 to 140 μm/hr was achieved using an oxygen-acetylene combustion spraying technique in an atmospheric environment. Investigations on the processing indicated that the gas flow ratio, substrate position, substrate temperature, temperature distribution, and substrate pretreatment were the most important factors affecting the growth of diamond crystals. Evaluation by means of X-ray diffraction, Raman spectroscopy, scanning electron microscopy, and electron probe microanalysis showed that the synthesized diamond was nearly perfect in morphology, structure, and purity.     

Solubility of amaranth seed proteins in sodium sulphate and sodium chloride: the main factor in quantitative extraction for analysis

Nitrogen was extracted more efficiently from amaranth seed with 0.04 M Na₂SO₄ (5% w/v) than with either 0.09 M or 0.17 M NaCl (5% or 10% w/v), despite both solutions having the same ionic strength (μ= 1). Solubility of saline soluble proteins (albumin ± globulin) was very poor in either water or 1M NaCl, but increased in 0.4M NaCl at alkaline pH between 7 and 10. Globulins were very soluble in 0.4M NaCl at a pH 9. Albumin was the main storage protein. Saline soluble proteins formed very weak gels.