Morphological evolution of primary TiC carbide in laser clad TiC reinforced FeAl intermetallic composite coating

1　INTRODUCTIONIronaluminumbasedonFeAlintermetallicalloywasexpectedtobeanimportantandpotentialhightemperaturematerial,becauseitsgoodresistancetooxidationandcorrosion ,lowdensityandhightem peraturemelting point[12 ] .However ,theintrinsicpropertiesofFeAlintermetallicalloy ,suchaslowductilityandlowfracturestrength ,limiteditsindus trialapplications .Howtoimprovemechanicalproper tiesofFeAlintermetallicalloyandexpanditsindus trialapplicationrealmwasanimportantresearchas pectformaterialworke…     

Atomic force microscopy study of biaxially oriented polypropylene films

Atomic force microscopy (AFM) uses a very sharp pointed mechanical probe to collect real-space morphological information of solid surfaces. AFM was used in this study to image the surface morphology of a biaxially oriented polypropylene film. The polymer film is characterized by a nanometer-scale, fiberlike network structure, which reflects the drawing process used during the fabrication of the film. AFM was used to study polymer-surface treatment to improve wettability by exposing the polymer to ozone with or without ultraviolet (UV) irradiation. Surface-morphology changes observed by AFM are the result of the surface oxidation induced by the treatment. Due to the topographic features of the polymer film, the fiberlike structure has been used to check the performance of the AFM tip. An AFM image is a mixture of the surface morphology and the shape of the AFM tip. Therefore, it is important to check the performance of a tip to ensure that the AFM image collected reflects the true surface features of the sample, rather than contamination on the AFM tip.     

广义数学形态滤波器在风电机齿轮箱故障诊断中的应用

在形态滤波算子和形态结构元素的基础上,提出采用不同结构的结构元素级联形成广义数学形态滤波器,实现风电机齿轮箱振动信号的降噪方法.用一个既有振幅调制,又有相位调制的非平稳信号仿真了故障齿轮箱的齿轮振动信号,对仿真信号采用提出的广义数学形态滤波器进行了处理.处理结果表明,提出的广义数学形态滤波器能有效消除噪声,用于对风电机齿轮箱的故障检测是可行的.     

城市河口填海特征及其生态影响的形态学研究

淤泥质河口是填海建港主要地区,体现出明显城市化形态特征,却未在城市形态学领域引发实质性研究,导致填海规划缺乏指导。本文选择20个研究对象,以适宜分辨率Goo对eEanh影像为数据源,利用形态绘制方法,依据基础形态指数稳定域,得出河口区适宜研究幅度和精度,并利用填海方式破碎度和潮间带特征指数分析河口形态与生态特征。结果显示,多数案例河口因填海使潮间带衰退严重;亚洲填海河口在以潮间带相关指数为生态评价要素的前提下,反映出较差形态稳定性和生态状况;同等填海规模下,单斑块填海比多斑块分散填海对潮间带侵占破坏更大。     

A mathematical morphology-based multi-level filter of LiDAR data for generating DTMs

Light detecting and ranging(LiDAR)technology has become an efective way to generate highresolution digital terrain models(DTMs).To generate DTMs,point measurements from non-ground features,such as buildings,vegetation and vehicles,have to be identifed and removed while preserving the terrain points.This paper proposes an efcient mathematical morphology-based multi-level flter to generate DTMs from airborne LiDAR data.Preliminary non-ground points are frst identifed with the characteristics of the multiecho airborne LiDAR data.The localized mathematical morphology opening operations are then immediately applied to the remaining points.By gradually increasing the window size of the flter and using a dynamic critical gradient threshold,the non-ground points are removed,while the ground points are preserved.Eight samples were chosen from eight sites provided with the ISPRS Commission III,Working Group 3,to evaluate the accuracy of our algorithm.Both the qualitative and quantitative experiment analyses show that our morphologybased multi-level flter method achieves promising results,not only in flat urban areas but also in rural areas,especially in preserving complex terrain details,while non-ground spatial objects are removed.     

DNA芯片图像的自适应提取

软件内嵌探针测试是在探针函数模板的框架内编写被测对象,并对被测对象进行面向对象软件的常规测试,在观察预期结果与实际结果是否一致的同时,还要察看探针函数输出的信息,以确定对象的状态是否正确。本论文研究的重点在于探针函数的构成、探针函数的实现及内嵌探针测试方法的应用研究,意在构筑一个基本的应用框架,提供一种实用的测试方法。     

基于数学形态学边缘检测的车牌字符分割算法

汽车牌照字符分割是车牌识别过程中的关键步骤,直接影响到字符识别的效果。传统的方法对车牌图像质量要求较高,且抗干扰能力较差。提出一种基于Renyi熵和数学形态学边缘检测的车牌字符投影分割算法,首先用二维Renyi熵最大阈值法对车牌图像做二值化处理,然后用形态学腐蚀运算进行边缘检测,再去除车牌边框,最后通过投影分割提取车牌字符。仿真实验表明,基于Renyi熵最大阈值法和数学形态学边缘检测车牌图像预处理使得车牌字符边缘清晰,降低了噪声的干扰,有利于进行字符投影分割。该算法分割速度快,鲁棒性好,可获得比传统方法更好的分割效果。     

一种面向机器人的超市形态建模方法

结合超市经营客观实际,围绕环境、商品、货架形态建模过程遇到的体系结构、关键症结解决对策等展开深入讨论,给出了问题处置策略、指导原则与技术路线。     

PVC建材表面缺陷检测系统研究与设计

为满足PVC建材表面缺陷在线系统高速、高分辨率的检测要求,提出PVC建材表面缺陷检测的系统设计方案。为保证检测系统的实时性,硬件上采用面阵CCD摄像机与LED面光源相结合的图像采集装置,软件上采用实时处理和准实时处理相结合的图像处理方法。针对缺陷图像高噪声、直方图单峰明显的特征,提出边缘检测分割技术与数学形态处理相结合的算法流程。通过分析图像缺陷的统计特性,提取PVC建材表面缺陷区域的特征参数,利用基于决策树的分类器将缺陷分为气泡、色痕、裂痕等。实验结果验证算法的有效性和实时性,其缺陷的检出率达到95%以上,识别率达90%以上。     

The Strong Property of Morphological Connected Alternated Filters

This paper studies connectivity aspects that arise in image operators that process connected components. The focus is on morphological image analysis (i.e., on increasing image operators) and, in particular, on a robustness property satisfied by certain morphological filters that is denominated the strong property. The behavior of alternated compositions of openings and closings is investigated under certain assumptions, particularly connectedness and a connected component preserving condition. It is shown that these conditions cannot in general guarantee the strong property of certain connected alternated filters because of issues related to the locality of the filters. As treated in the paper, there have been a series of misunderstandings in the literature concerning this topic, and it is important to clarify them. The root cause of those problems is discussed, and a solution is indicated. The class of connected openings and closings used to build connected alternated filters should therefore be defined to avoid such situations, since the strong property of alternated filters should be a distinctive characteristic of this class.