陶瓷材料传统的表面改性技术

本文从陶瓷本身及陶瓷涂层两个方面综述了陶瓷传统表面改性技术的概况、制备方法及应用现状。     

CCFW的一种新型张力控制方法研究

通过一个实例介绍了计算机控制缠绕机（CCFW）的一种缠绕纤维的张力控制方法，着重分析了其技术要求与难点，并给出了最终的实现方法。这种方法对于造纸，纺织工业设备及其他缠绕设备的张力控制都极具参考价值。     

AA-MA共聚物制备工艺对助磨作用影响的研究

采用溶液聚合的方法,制备了丙烯酸(AA)、马来酸酐(MA)聚合物钠盐,系统地研究了单体种类、用量、反应温度、引发剂种类和浓度等助磨剂合成工艺对其助磨效果的影响规律.结果表明:所制备的助磨剂对石英、滑石和锆英石等硬质陶瓷原料具有明显的助磨效果,优于传统的工业助磨剂.较佳的助磨剂制备工艺为:以丙烯酸为单体,过硫酸胺-亚硫酸氢钠为引发剂,MA∶AA=2∶8(wt%);反应温度为65℃;丙烯酸溶液质量百分比浓度为2%;反应时间为4h;引发剂过硫酸胺 亚硫酸氢钠质量百分比为2%.     

下河沉积型瓷石的工艺特性与开发应用的探讨

本文论述了新近在江西下河发现的沉积型瓷石的地质特点、矿石特征、精泥性能、成瓷工艺及其开发应用前景。     

陶瓷隧道窑单耗统计数学模型的研究

本文依据陶瓷隧道窑热工测试数据和热平衡报告,采用多元回归和逐步回归统计理论,得到了陶瓷隧道窑单位重量热耗的多元回归数学模型和逐步回归数学模型。利用该数学模型可对单耗进行预测和控制。     

钨青铜陶瓷Sr0.6Ba0.4Nb2O6的合成、结构与介电性能

通过固相反应法合成了Sr0．6Ba0．4Nb2O6陶瓷，并对其进行了结构、介电性能的表征。结果表明Sr0．6Ba0．4Nb2O6陶瓷为四方钨青铜结构单相，其在60℃附近存在一个明显的弥散介电峰，峰值温度随频率向高温偏移，为典型的弛豫铁电相变。室温时，10kHz频率下，其介电常数约为1404，介电损耗为0．03。     

溶胶-凝胶法制备多孔陶瓷的研究进展

本文综合论述了溶胶-凝胶法制备多孔陶瓷的工艺研究进展以及影响溶胶-凝胶法制备多孔陶瓷的主要因素，并讨论了今后溶胶-凝胶法制备多孔陶瓷的主要研究问题及其发展前景。     

钒在陶瓷工业中的应用

本文通过钒的应用，阐述了金光釉和凹釉的形成机理。并说明了其在陶瓷釉料生产中所扮演的重要角色。     

Membrane degumming of crude rice bran oil: Pilot plant study

The procedure for the classical chemical refining of vegetable oils consists of degumming, alkali neutralization, bleaching, and deodorization. Conventional refining of rice bran oil using alkali gives oil of acceptable quality, but the refining losses are very high. A critical work has been carried out to study the application of membrane technology in the pretreatment of crude rice bran oil. Oils intended for physical refining should have a low phosphorus content, and this is not readily achievable by the conventional acid/water degumming process. The application of membrane technology for the pretreatment of rice bran oil has been investigated. The process has already been successfully applied to other vegetable oils. Ceramic membranes, which are important from the commercial point of view, were examined for this purpose. The results showed that the membrane‐filtered oils met the requirements of physical refining, with a substantial reduction in color. It was observed that most of the waxy material was also rejected. Experiments were carried out to establish the relationship between permeate flux and rejection with membrane pore size, trans‐membrane pressure and micellar solute concentration.