覆膜砂离心铸造球墨铸铁管性能的研究

论述了以覆膜砂离心铸造和用含锰及微量元素含量较高的再生铁进行球化处理浇注球铁管的方法，研究了模内孕育，随流孕育和金属铋孕育对铸态球铁管塑性的影响，考察了锰，硅和碳当量及衬砂层厚度对铸态球铁管塑性的影响规律。     

220kV枣林Ⅱ回线路导线防舞分析与措施

通过气象条件、地形以及线路结构参数等特点对将建的220 kV枣林Ⅱ回线路荆门段,可能导致线路导线舞动的原因进行了分析,并根据线路的自身特点和总结出的防舞经验,提出了该工程的导线防舞设计思路和措施,以便更好的应用到工程实例中进行检验.     

220kV变电站三相短路电流计算及结果应用

文章阐述了220 kV变电站的三相短路电流计算的重要性,并结合工程实例介绍了三相短路电流的计算过程及计算结果在变电站设计中的应用.     

复合型导电高分子材料研究进展

简述了复合型导电高分子材料的研究及发展,并对其导电机理、基体树脂、导电填料的研究概况进行了述评,介绍了其在各领域中的应用．     

尖端导体电晕放电试验研究

电晕放电是高压电力工程及航空航天领域研究的重点及难点问题;为研究尖端导体电晕放电的辐射特点,设计了电晕放电试验模拟系统;利用测试系统及天线在微波暗室内进行了不同测试距离、不同放电电压及不同尖端导体长度条件下的试验;通过对试验数据的分析可知,电晕放电辐射信号呈衰减振荡模式;电晕放电脉冲重复率随着充电电压的增大而增加;天线接收的辐射信号能量与测试距离成反比;随着充电电压的增加,信号辐射功率呈增加趋势;试验研究结果为输变电工程、航空航天装备的电磁环境分析提供参考。     

Light scattering from anisotropic, randomly rough, perfectly conducting surfaces

An approach is introduced for performing rigorous numerical simulations of electromagnetic wave scattering from randomly rough, perfectly conducting surfaces. It is based on a surface integral technique, and consists of determining the unknown electric surface current densities from which the electromagnetic field everywhere can be determined. The method is used to study the scattering of a p-polarized beam from an anisotropic Gaussian, randomly rough, perfectly conducting surface. It is demonstrated that the surface anisotropy gives rise to interesting and pronounced signatures in the angular intensity distribution of the scattered light. The origins of these features are discussed.     

Potentiometric CO2 gas sensor with lithium phosphorous oxynitride electrolyte

Potentiometric cell, Au/LiCoO₂ 5 m/o Co₃O₄/Li_2.88PO_3.73N_0.14/Li₂CO₃/Au, has been fabricated and investigated for monitoring CO₂ gas. A LiCoO₂–Co₃O₄ mixture was used as the solid-state reference electrode instead of a reference gas. The idea is to keep the lithium activity constant on the reference side using thermodynamic equilibrium at a given temperature. The thermodynamic stability of the reference electrode was studied from the phase stability diagram of Li–Co–C–O system. The Gibb’s free energy of formation of LiCoO₂ was estimated at 500°C from the measured value of the cell emf. The sensors showed good reversibility and fast response toward changing CO₂ concentrations from 200 to 3000 ppm. The emf values were found to follow a logarithmic Nernstian behavior in the 400–500°C temperature range. CH₄ gas did not show any interference effect. Humidity and CO gas decreased the emf values of the sensor slightly. NO and NO₂ gases affect this sensor significantly at low temperatures. However, increased operating temperature seems to reduce the interference.     

The structure of nanocomposite 1D cationic conductor crystal@SWNT

Nanocomposites consisting of one-dimensional (1D) crystals of the cationic conductors CuI, CuBr and AgBr inside single-walled carbon nanotubes, mainly (n, 0), were obtained using the capillary technique. 1D crystal structure models were proposed based on the high resolution transmission electron microscopy performed on a FEI Titan 80-300 at 80 kV with aberration correction. According to the models and image simulations there are two modifications of 1D crystal: hexagonal close-packed bromine (iodine) anion sublattice (growth direction <001>) and 1D crystal cubic structure (growth direction <112>) compressed transversely to the nanotube (D(m) ～1.33 nm) axis. Tentatively this kind of 1D crystal can be considered as monoclinic. One modification of the anion sublattice reversibly transforms into the other inside the nanotube, probably initiated by electron beam heating. As demonstrated by micrographs, copper or silver cations can occupy octahedral positions or are statistically distributed across two tetrahedral positions. A 1DAgBr@SWNT (18, 0; 19, 0) pseudoperiodic 'lattice distortion' is revealed resulting from convolution of the nanotube wall function image with 1D cubic crystal function image.     

导体消雷器在输电线路边坡防雷上的应用

本文首先概述输电线路防雷的一般分析和计算方法,再通过对110kV古东462线#6塔防雷计算,指出边坡对绕击的影响,针对防雷设计提出了几项防止绕击的具体措施,并根据雷电定位系统的落雷数据和实际运行情况进行对比分析,总结铜陵供电公司导体消雷器应用经验,提出安装导体消雷器可作为边坡防雷的有效措施。     

镀膜技术在陶瓷上的应用

叙述了镀膜技术在种类和特点以及应用于陶瓷产品上存在问题和解决方法