802.11 DCF协议引入信道预约机制的必要性分析

论文对802.11 DCF协议引入信道预约机制的必要性问题进行了探讨.通过分析信道预约机制与隐藏/暴露终端问题之间的关系,提出一种比较隐藏终端和暴露终端出现概率大小的等效方法,并给出了相应的数值估算结果.理论分析结果验证了802.11 DCF协议引入信道预约机制的有效性.     

工作流系统性能分析与优化方案

随着企业业务流程信息化建设的推进,对核心业务领域的流程化管理已成为实现信息化水平进一步提升的重要基础,工作流系统作为基础设施,其性能在一定程度上决定了业务流程流转的效率.本文通过对工作流系统性能的量化分析,得出其性能指标与数据库规模的量化关系,从而为性能优化工作提出关键因素和技术切入点,在此基础上,本文结合数据库机制对工作流性能优化方案进行了研究和实现,提出了一种有效的算法,实现了归档机制,从而达到提升工作流系统性能优化的最终目的.     

网络在线文化信息监控平台建设与服务机制研究

针对高速网络环境下网络文化信息传输内容监控的需要,提出了实现拥有自主版权的能够在边界路由器上监测运行的网络文化信息监控系统的3种设计方法、3个层面的设计思想,以及数据采集结构、模块功能实现、服务机制创新的方法和理念,试图有效监测特征敏感性在线文化信息的来源与去向,创新监控应对策略,提高监控安全事件处理的效能。     

Effect of fretting amplitudes on fretting wear behavior of steel wires in coal mines

Given that fretting wear causes failure in steel wires, we carried out tangential fretting wear tests of steel wires on a self-made fretting wear test rig under contact loads of 9 and 29 N and fretting amplitudes ranging from 5 to 180 μm. We observed morphologies of fretted steel wire surfaces on an S-3000N scanning electron microscope in order to analyze fretting wear mecha-nisms. The results show that the fretting regime of steel wires transforms from partial slip regime into mixed fretting regime and gross slip regime with an increase in fretting amplitudes under a given contact load. In partial slip regime, the friction coefficient has a relatively low value. Four stages can be defined in mixed fretting and gross slip regimes. The fretting wear of steel wires in-creases obviously with increases in fretting amplitudes. Fretting scars present a typical morphology of annularity, showing slight damage in partial slip regime. However, wear clearly increases in mixed fretting regime where wear mechanism is a combination of plastic deformation, abrasive wear and oxidative wear. In gross slip regime, more severe degradation is present than in the other regimes. The main fretting wear mechanisms of steel wires are abrasive wear, surface fatigue and friction oxidation.     

潜器Stewart平台动力学仿真

建立了Stewart平台的动力学模型,对潜器的动力学特征进行分析,对其运动进行动力学仿真研究.以Stewart平台的任意支腿为研究对象,考虑各支腿的重力和惯性力,利用牛顿-欧拉方法建立了支腿及动平台的力和力矩平衡方程,推导出了Stewart平台的动力学方程及支腿所受的支反力.以潜艇模拟器并联机构为例,运用动力学模型进行了实际计算并绘制了支腿驱动力的变化曲线,将驱动力与支腿运动速度相乘得到支腿功率输出的变化曲线,为液压油缸的功率设计提供了依据,也为潜器的精确动力学解耦奠定了基础.     

螺纹桩在软弱地层中的应用

分析了螺纹桩的受力机理,探讨了螺纹桩单桩承载力的确定方法,指出螺纹桩单桩承载力高、节约材料显著、能充分利用地基土的特性,在软弱地层中的应用优势显著,并通过实际工程实例给予具体说明.     

动态挖掘进程内在机制研究

针对动态挖掘进程内在运行机理,通过对动态挖掘进程中不同挖掘任务的优化分析以及动态挖掘进程和生物免疫过程之间的对比分析,提出了动态挖掘进程的eDMP机制;定义健壮型协调器,融合进化计算和免疫算法,设计了eDMP机制的实现方案;在理论分析和方案设计的基础上,给出了eDMP机制的一般流程。实验结果表明,eDMP机制及其实现方案在解决动态挖掘问题上有效、适用。     

Discrimination for ablative control mechanism in solid-propellant rocket nozzle

The ablation in solid-propellant rocket nozzle is a coupling process resulted by chemistry, heat and mass transfer. Based on the heat and mass transfer theory, the aero-thermo-dynamic, and thermo-chemical kinetics, the thermal-chemical ablation model is established. Simulations are completed on the heat flow field and chemical ablation in the nozzle with different concentrations, frequency factors and activation energy of H2. The calculation results show that the concentration and the activation energy of H...     

中小企业集群演进动力机制的实证研究

在总结企业集群生成动力,发展动力与锁定效应的基础上,构建了企业集群演进的动力机制模型,利用河北省清河羊绒企业集群的调研数据进行了实证分析,在对各个影响因素的作用机制进行具体分析的基础上,将数据带入"企业集群演进动力作用机制模型",得出来现阶段对集群演进产生影响的主要因素.