Application of ultrasonic waves in activation of microcrystalline cellulose

In this work, microcrystalline cellulose (MCC) was activated with ultrasonic waves. The influences of ultrasonic treatment on the changes of supramolecular structures and morphology structure were studied by WAXS and SEM. The accessibility of the MCC was characterized by water retention value (WRV) and specific surficial area. The influence of ultrasonic treatment on the reactivity of MCC was investigated through the reaction of MCC being oxidized into 2,3‐diadehyde cellulose (DAC) by periodate sodium. The mechanism of the reactivity change of ultrasonically treated MCC was examined. The results showed that the degree of crystallinity of MCC decreased and the degree of polymerization showed little change after treatment with ultrasonic waves. The morphologial variation of the treated MCC was significant when compared with the untreated MCC, which contribute to the improvement of accessibility. The aldehyde content of DAC prepared from ultrasonically treated MCC was improved from 64.19 to 85.00%, indicating that the regioselective oxidation reactivity of MCC was significantly improved. The aldehyde content was found to first increase with time of ultrasonic treatment to a point, and then decrease as time progressed. In addition, the aldehyde content was found to increase with an increase in ultrasonic power. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Polymer transcrystallinity induced by carbon nanotubes

In this work, we provide the evidence of polymer transcrystallinity in the presence of carbon nanotubes (CNTs). The interfacial morphology of carbon nanotube fiber-polypropylene matrix is investigated by means of polarized optical microscopy (POM), wide-angle X-ray diffraction (WAXD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The supramolecular microstructures of polypropylene transcrystals induced by the nanotube fiber are observed in the range of isothermal crystallization temperatures from 118 °C to 132 °C. The dynamic process of transcrystallization is analyzed by using the theory of heterogeneous nucleation. Microstructure analysis shows that the nanotubes can nucleate the growth of both α- and γ-transcrystal, and α-transcrystals dominate the overall interfacial morphology. Close to the nanotube fiber surface, a cross-hatched lamellar microstructure composed of mother lamellae and daughter lamellae is observed.     

Comparative Study of Models on Confinement of Concrete Cylinders with Fiber-Reinforced Polymer Composites

The use of fiber-reinforced polymer (FRP) composites for strengthening and/or rehabilitation of concrete structures is gaining increasing popularity in the civil engineering community. One of the most attractive applications of FRP materials is their use as confining devices for concrete columns, which may result in remarkable increases of strength and ductility as indicated by numerous published experimental results. Despite a large research effort, a proper analytical tool to predict the behavior of FRP-confined concrete has not yet been established. Most of the available models are empirical in nature and have been calibrated against their own sets of experimental data. On the other hand, the experimental results available in the literature encompass a wide range of values of the significant variables. The objective of this work is a systematic assessment of the performance of the existing models on confinement of concrete columns with FRP materials. The study is conducted in the following steps: the experimental data on confinement of concrete cylinders with FRP available in the technical literature are classified according to the values of the significant variables; the existing empirical and analytical models are reviewed, pointing out their distinct features; the whole set of available experimental results is compared with the whole set of analytical models; and strengths and weaknesses of the various models are analyzed. Finally, a new equation is proposed to evaluate the axial strain at peak stress of FRP-confined concrete cylinders.     

State of Practice for Positive Moment Connections in Prestressed Concrete Girders Made Continuous

Precast bridges are often constructed as single span for dead load, but continuous for live load. A diaphragm connection is provided for negative moment continuity. However, the connection may also be subjected to positive moments due to time-dependent effects. Because these moments may be large enough to damage the diaphragm or even the girders, a positive moment connection is often provided. This paper reports on a study to determine the types of positive moment connections used across the country and to identify potential problems with these types of connections. A questionnaire survey was conducted to assess the state of practice for precast prestressed concrete bridges made continuous. The survey provides valuable information on this type of bridge and updates a previous survey on this subject.     

Hierarchically Ordered Polymer Films by Templated Organization of Aqueous Droplets

Hierarchically ordered structures facilitate the incorporation of diverse functions simultaneously. The present report introduces a simple and novel strategy for producing hierarchically ordered polymeric films. Hierarchical ordering of aqueous droplets on a polymer solution is realized by the imposition of physical confinement via various shaped gratings. After drying of the solution, well‐ordered hierarchical structures were fabricated in the remaining polymer film. The size of the grating structure and the lattice size of spontaneous hexagonally packed aqueous pores comprise two different length scales, thereby offering multiscale ordering. Interfacial wetting of the polymer solution to the grating surface was crucial in terms of obtaining a highly ordered structure that can be tuned by dissolving a small amount of surfactant in the polymer solution. The present novel approach provides a new opportunity for lithography‐free fabrication of complex hierarchical structures.     

Shapes of Submerged Funicular Arches

In this paper, the analytical forms of the shapes of submerged funicular arches are expressed in terms of elliptic integrals. The initial radius of curvature at the apex is related to the water depth at the apex and the axial compressive force. The shape of the submerged funicular arches depends on the ratio between this initial radius of curvature and the water depth at the apex. Using the analytical expressions, the maximum span and height of the submerged funicular arches can be determined explicitly. Besides, the analytical expressions are useful in determining the design parameters for the submerged funicular arches accurately.     

Lyapunov analysis of the approximate motion equations of flexible structures

In this paper, the effectiveness of the approximate motion equations of a flexible structure, obtained by the RitzKantorovich method, is analysed by using Lyapunov functions. The analysis, which is restricted to the case of a single flexible beam for the sake of simplicity, is carried out under the assumption that a partial dissipation is present, affecting only the first degrees of freedom of the system. By means of suitable Lyapunov functions, an overbounding estimate of the quadratic approximation error is determined as a decreasing function of the approximation order. The analysis is completed by considering the two ‘extreme’ cases: the theoretical absence of dissipation and the presence of structural dissipation, affecting all the infinite degrees of freedom.     

非线性地基上桩结构物空间分析

本文提出了桩结构物－非线性地基空间相互作用分析的迭代法和非线性有限元法。其中，桩基分析用ｐ－ｙ曲线法。结合实际结构物进行了大量的计算及比较分析，成果是令人满意的，可以付诸应用。