A risk assessment of salmonellosis linked to chicken meals prepared in households of China

A quantitative microbiological risk assessment model was used to quantify the risk of salmonellosis caused by bacterial growth and cross-contamination of chicken meals prepared in households of China. Chinese data on initial loads of Salmonella in chicken carcasses sold at retail, storage time and handling of raw chicken meat in household kitchens and confirmatory transfer rates of Salmonella among different kitchen objects were collected. Only one third of Chinese families in our sample separated the cutting board between raw and ready-to-eat foods. The cross-contamination of ready-to-eat foods from chicken meals via the cutting board, the knife and cooks’ hands increased the frequency of pathogen ingestion and the risk of salmonellosis. A significant decrease in the risk of salmonellosis could be achieved by reducing the cross-contamination when handling raw chicken meat and ready-to-eat foods. Decreasing the prevalence of Salmonella contamination to 8.8% or removing chicken carcasses with contamination densities higher than 100 MPN/100 g at retail was less effective. Using transfer rates of Salmonella from raw chicken meat to the wooden cutting board instead of that from references, a statistically higher risk of salmonellosis per serve due to the cross-contamination in households was observed. The present study validated values of hygiene practices in China to reduce the risk of salmonellosis from contaminated raw chicken meat at retail. Deliberate surveys for cooking behaviors and transfer rates of Salmonella from and to different objects including wooden cutting boards were needed.     

The effect of styrene–butadiene latex carboxylation on adhesion

Styrene–butadiene latices are widely used as binders in pigmented coatings for the paper and board industry. White pitch deposition, which is one type of surface fouling, is a well-known problem at paper machines using coated broke as a raw material. The main component of white pitch is latex, such as styrene–butadiene. The viscoelastic properties of styrene–butadiene latex have been found to affect on white pitch formation, but the effect of carboxylation has not been studied extensively. Carboxylation has traditionally performed to latices in order to increase colloidal stability, but it has also effect on mechanical properties of the latices.In this paper, we studied the adhesion potential of three styrene–butadiene latices by using a cylindrical probe tack method under dry and aqueous conditions while varying the carboxylation degree of the latex. Adhesion potential was measured using low and high energy surfaces as adherents. The results show that carboxylation influences adhesion potential of latices in both dry and aqueous environments.     

Drinking water distribution systems contamination management to reduce public health impacts and system service interruptions

Decisions on protecting public health against drinking water systems contamination threats should be made with careful consideration of credibility of threat observations and adverse impacts of response on system serviceability. Decision support models are developed in this study to prepare water utility operators for making these critical decisions during the intense course of an emergency. A pressure-dependent demand model is developed to simulate the system hydraulics and contaminant propagation under pressure-deficit conditions that emerge after the response actions are executed. Contrary to conventional demand-driven models, this hydraulic analysis approach prevents potential occurrence of negative pressures during the simulation and may identify better response protocols through exploring a larger search space. Response mechanisms of contaminant containment and discharge are optimized using evolutionary algorithms to achieve public health protection with minimum service interruption. Sensitivity analyses are conducted to assess optimal response performance for varying response delay, number of hydrants, and intrusion characteristics. Different methods for quantifying impacts on public health and system serviceability are explored and the sensitivity of the optimal response plan to these different formulations is investigated. The simulation-optimization schemes are demonstrated and discussed using a virtual water distribution system.     

Dissolved silver in European estuarine and coastal waters

Silver is one of the most toxic elements for the marine microbial and invertebrate community. However, little is known about the distribution and behaviour of dissolved silver in marine systems. This paper reports data on dissolved and sediment-associated silver in European estuaries and coastal waters which have been impacted to different extents by past and present anthropogenic inputs. This is the first extended dataset for dissolved silver in European marine waters. Lowest dissolved silver concentrations were observed in the Gullmar Fjord, Sweden (8.9 ± 2.9 pM; x ± 1σ), the Tamar Estuary, UK (9.7 ± 6.2 pM), the Fal Estuary, UK (20.6 ± 8.3 pM), and the Adriatic Sea (21.2 ± 6.8 pM). Enhanced silver concentrations were observed in Atlantic coastal waters receiving untreated sewage effluent from the city of A Cor?na, Spain (243 ± 195 pM), and in the mine-impacted Restronguet Creek, UK (91 ± 71 pM). Anthropogenic wastewater inputs were a source of dissolved silver in the regions studied, with the exception of the Gullmar Fjord. Remobilisation of dissolved silver from historically contaminated sediments, resulting from acid mine drainage or sewage inputs, provided an additional source of dissolved silver to the estuaries. The ranges in the log particle-water partition coefficient (K_d) values of 5-6 were similar for the Tamar and Mero estuaries and agreed with reported values for other estuaries. These high K_d values indicate the particle reactive nature of silver with oxic sediments. In contrast, low K_d values (1.4-2.7) were observed in the Fal system, which may have been due to enhanced benthic inputs of dissolved silver coupled to limited scavenging of silver on to sediments rich in Fe oxide.     

Detection and analysis of the microdistribution of uranium in the gills of freshwater Corbicula fluminea by SIMS technique

The microdistribution of uranium in the gills of freshwater bivalve Corbicula fluminea following chronic direct exposure to this radioelement has been investigated using the SIMS technique. Different exposure levels and exposure durations have been studied. The SIMS mass spectra and ²³⁸U⁺ ion images produced with a SIMS CAMECA 4F-E7 show an U accumulation with the lower aqueous U concentration (20 μg/L) and the influence of the exposure levels on the bioaccumulation capacities. Furthermore, the ionic images display a heterogeneous distribution of uranium within the gill structure whatever the exposure conditions are. This study, in keeping with the ENVIRHOM French research program, was led to the conclusion that ion microscopy is an appropriate analytical method for trace elements and can give elemental cartography in a biological tissue section.     

薯干原料深层发酵柠檬酸生产中污染菌的分离与防治

本文结合生产实践对薯干原料深层发酵生产柠檬酸工艺中的污染菌的分离与防治．进行了实验研究。     

Removal of Lead from Contaminated Water and Clay Soil Using a Biosurfactant

Lead removal from water and contaminated soils was investigated using biosurfactant, anionic, and nonionic surfactants in continuously stirred batch reactors. Lead-contaminated water up to 100?mg/L and clay soil up to 3,000?mg/kg were used in this investigation. The surfactant concentration up to 10 critical micelle concentration was used. The speciation of lead into the micelles was quantified and the lead removal efficiency depended on the level of contamination, surfactant type, and concentration. Of the surfactants used, biosurfactant (produced from used vegetable oil) had the best removal efficiency (75%) at a lead contamination of 100?mg/L in water at pH of over 12. The Fourier-transformed infrared spectroscopy study showed that the carboxyl group in the biosurfactant was effective in removing the lead from the solution. Langmuir and Freundlich relationships were used to represent the micelle partitioning of lead in the surfactant solutions. Desorption of lead from contaminated kaolinite clay was represented using linear isotherms. The biosurfactant solution had a higher micelle partitioning for the lead from contaminated water and desorbing the lead from the contaminated soil compared to the other chemical surfactants.     

Tests of the fidelity of lake sediment core records of mercury deposition to known histories of mercury contamination

There has been recent controversy over the discrimination between natural and anthropogenic loadings of mercury to lakes. Sediment core profiles have been interpreted as evidence that inputs to lakes have increased. Some investigators have argued, however, that mercury may be sufficiently mobile in sediments to generate profiles that are misinterpreted as historical records. This argument can be tested where the histories of inputs of mercury are known independently from other kinds of information. We have such cases in Canadian lakes and we have been able to assemble sediment core records for comparison with known source histories. Three cases are represented by Clay Lake in Ontario where the source was a chlor-alkali plant with a known history of mercury discharges, Giauque Lake in the Northwest Territories where mercury was used at a gold mine to extract gold from ore, and Stuart Lake in British Columbia where a mercury mine operated for a known period at Pinchi Lake, the lake immediately upstream from Stuart Lake. In these cases lake sediment cores were dated using lead-210 and cesium-137 and then slices were analysed for mercury. The histories of mercury deposition derived from the cores agreed well with the known histories of inputs.     

Seasonal and daily variations in concentrations of methyl-tertiary-butyl ether (MTBE) at Cranberry Lake,New Jersey

Methyl-tertiary-butyl ether (MTBE), an additive used to oxygenate gasoline, has been detected in lakes in northwestern New Jersey. This occurrence has been attributed to the use of gasoline-powered watercraft. This paper documents and explains both seasonal and daily variations in MTBE concentrations at Cranberry Lake. During a recent boating season (late April to September 1999), concentrations of MTBE typically exceeded 20 microg/L. MTBE concentrations varied daily from 12 to 24 microg/L over a 2-week period that included the Labor Day holiday. Concentrations were highest on weekends when there is more boat traffic, which had an immediate effect on MTBE mass throughout the lake. MTBE concentrations decreased to about 2 microg/L shortly after the end of the summer recreational season. The loss of MTBE can be accounted for by volatilization, with a half-life on the order of 10 days. The volatilization rate was modeled with the daily decrease in MTBE then the modeled rate was validated using the data from the seasonal decline.     

选择性化学镍/金工艺的应用

本文主要通过对选择性化学镍／金的生产应用，就流程中的二次干膜、退膜、化学镍金、OSP的相关生产控制进行总结。