排序方式: 共有41条查询结果,搜索用时 15 毫秒
31.
《低温学》2017
Serial and parallel staging of exo-reversible coolers are formulated, analyzed and compared. The parallel staging includes an extensive parameter which is the proportion of combined stages. This extensive free parameter affects the intensive factors of specific power and figure of merit. Serial staging reduces the 1st Law efficiency and parallel staging improves the 2nd Law efficiency. Comparison of a parallel with a serial staging under common cooling capacity and cooling range, shows that it is always possible to find a parallel arrangement of lower specific power and more compact. Some results are demonstrated on staging of Joule-Thomson cryocoolers (below and above the Joule-Thomson inversion temperature). 相似文献
32.
33.
The thermodynamic optimization of differing Reverse Brayton Refrigeration (RBR) cycle configurations is presented in this study. These cycle configurations include: Conventional 1-stage compression cycle; Conventional 2-stage compression cycle; 1-stage compression Modified cycle with intermediate cooling of the recuperator using an auxiliary cooler; and an Integrated 2-stage expansion RBR cycle. For high pressure ratio applications, multi-stage compressors with intercooling are considered. Analytical solutions for the conventional cycles are developed including thermal and fluid flow irreversibilities of the recuperators and all heat exchangers in addition to the compression and expansion processes. Exergy analysis is performed and the exergy destruction of different components of the RBR cycles for different configurations is presented and the effects of important system parameters on performance are investigated. Thermodynamic optimization of the cycles with intermediate cooling of the recuperator is included. Effects of the 2nd law/exergy efficiency of the auxiliary cooler on the total system efficiencies are presented. 相似文献
34.
In the present study, we propose a new design of orifice pulse-tube refrigerator (VROPT) using a variable-resistance valve to replace the conventional orifice. The variable-resistance orifice (VRO) is basically a high-speed solenoidal valve similar to the fuel jet device widely used in automobile engines. By changing the frequency and periods of ON and OFF of the valve through an electronic device, we can change the flow resistance of the VRO. This thus provides a possibility for an OPT to be controlled on-line during operation. From the results obtained in the present study, we have shown that VROPT is able to achieve on-line control by regulating the duty cycle d or frequency fv of the VRO. We also show that VROPT will not loss its thermal performance as compared to conventional OPT. 相似文献
35.
空间机械制冷机与红外探测器的耦合技术 总被引:1,自引:0,他引:1
在空间红外遥感中,红外探测器是通过与制冷机的耦合获取冷量的。着重讨论为满足红外探测的需要,如何最大限度地消除空间的振动、电磁干扰等不利因素的影响。同时介绍降低漏热,提高冷量传输效率,从而保证制冷机与红外探测器良好耦合的技术。 相似文献
36.
This paper presents a model of a cryogenic refrigerator that integrates a reverse-Brayton lower temperature stage with a 2-piston Stirling upper temperature stage using a rectification system of check valves and buffer volumes. The numerical model extends the isothermal Schmidt analysis of the Stirling cycle by deriving the additional dimensionless governing equations that characterize the recuperative system. Numerical errors are quantified and the results are verified against analytical solutions in the appropriate limits. The model is used to explore the effect of the rectification system’s characteristics on the overall cycle’s behavior. Finally, the model is used to optimize the hybrid system’s design by varying the swept volume ratio and phase angle in order to maximize the refrigeration per unit of heat transfer in the recuperator and regenerator. 相似文献
37.
The vibrations of Gifford-McMahon (GM) and pulse-tube (PT) cryocoolers were measured and analyzed. The vibrations of the cold-stage and cold-head were measured separately to investigate their vibration mechanisms. The measurements were performed while maintaining the thermal conditions of the cryocoolers at a steady state. We found that the vibration of the cold-head for the 4 K PT cryocooler was two orders of magnitude smaller than that of the 4 K GM cryocooler. On the other hand, the vibration of the cold-stages for both cryocoolers was of the same order of magnitude. From a spectral analysis of the vibrations and a simulation, we concluded that the vibration of the cold-stage is caused by an elastic deformation of the pulse tubes (or cylinders) due to the pressure oscillation of the working gas. 相似文献
38.
A nodal analysis method for simulating inertance tube pulse tube refrigerators is introduced. The energy equation, continuity equation, momentum equation of gas, energy equation of solid are included in this model. Boundary condition can be easily changed to enable the numerical program calculate thermal acoustic engines, inertance tube pulse tube refrigerators, double inlet pulse tube refrigerators, and others. Implicit control volume method is used to solve these equations. In order to increase the calculation speed, the continuity equation is changed to pressure equation with ideal gas assumption, and merged with momentum equation. Then the algebraic equation group from continuity and momentum equation becomes one group. With this numerical method, an example calculation of a large scale inertance tube pulse tube refrigerator is shown. 相似文献
39.
《低温学》2017
High cooling capacity Stirling cryocooler generally has hundreds to thousands watts of cooling power at liquid nitrogen temperature. It is promising in boil-off gas (BOG) recondensation and high temperature superconducting (HTS) applications. A high cooling capacity Stirling cryocooler driven by a crank-rod mechanism was developed and studied systematically. The pressure and frequency characteristics of the cryocooler, the heat rejection from the ambient heat exchanger, and the cooling performance are studied under different charging pressure. Energy conversion and distribution in the cryocooler are analyzed theoretically. With an electric input power of 10.9 kW and a rotating speed of 1450 r/min of the motor, a cooling power of 700 W at 77 K and a relative Carnot efficiency of 18.2% of the cryocooler have been achieved in the present study, and the corresponding pressure ratio in the compression space reaches 2.46. 相似文献
40.
《低温学》2017
A two-stage Stirling Cryocooler has been developed and tested for cooling IR sensors in space application. The concept uses an opposed piston linear compressor to drive the two-stage Stirling expander. The configuration used a moving coil linear motor for the compressor as well as for the expander unit. Electrical phase difference of 80 degrees was maintained between the voltage waveforms supplied to the compressor motor and expander motor. The piston and displacer surface were coated with Rulon an anti-friction material to ensure oil less operation of the unit. The present article discusses analysis results, features of the cryocooler and experimental tests conducted on the developed unit. The two-stages of Cryo-cylinder and the expander units were manufactured from a single piece to ensure precise alignment between the two-stages. Flexure bearings were used to suspend the piston and displacer about its mean position. The objective of the work was to develop a two-stage Stirling cryocooler with 2 W at 120 K and 0.5 W at 60 K cooling capacity for the two-stages and input power of less than 120 W. The Cryocooler achieved a minimum temperature of 40.7 K at stage 2. 相似文献