压力计探测液面法探讨

针对油田地质特征复杂，易结蜡，测试中易出现假液面等情况，为准确快速测得液面资料，提出压力计测试液面法。该方法可作为回声仪测液面方法的有效补充。     

稀疏阵列天线综合的遗传算法优化

通过遗传算法优化选择常规满阵中一定比例的工作单元,使阵列在欠饱和状态下达到窄波束低副瓣的要求。以单元的工作状态和激励幅度为优化参量,波束宽度和副瓣电平为适值函数,通过适值缩放和多种群进化竞争使遗传进化稳定地收敛到全局最优。详细分析了稀疏阵的单元布局、稀疏率及单元激励对优化阵列特性的影响。     

大庆油田三类油层聚合物驱注入速度研究

注入速度是影响聚合物驱开发效果的重要指标,而由于假设条件的局限性,数值模拟方法无法体现聚合物溶液弹性对注入速度的影响。为了确定大庆油田三类油层合理注入速度,通过不同注入速度条件下的天然岩心驱油试验,对水驱和聚合物驱驱油效率进行了研究,结果表明,聚合物驱驱油效率提高值随驱替速度的变化可由二次多项式来表示。依据此关系式,由势的叠加理论得到的流体在油层中的渗流速度的基础上,建立了该类油层合理注入速度模型,并给出大庆油田三类油层在100 m注采井距下的合理注入速度为0.288 PV年/,该方法对现场开发方案编制有重要指导意义。     

龙滩工程按正常蓄水位400m方案一次建成效益巨大

2003年11月龙滩工程将实现大江截流，随着工程建设的全面推进，越发显出实施龙滩水电站正常蓄水位400m一次建成方案的重要性和紧迫性。相对分期建设而言，400m水位一次建成，工程效益大、增加投资少、无后期加高过程中的各种技术难题，基本不影响电站的初期发电效益，水轮机设计与运行问题少、机组运行条件好，电站规模效益与社会综合效益巨大，有利于移民安置和库区经济的发展，对国家、地方、企业均十分有利，因此应尽快决策实施400m一次建成方案。     

Acculturation, Familism, Parental Monitoring, and Knowledge as Predictors of Marijuana and Inhalant Use in Adolescents.

The authors investigated relationships between marijuana and inhalant use and several cultural and demographic factors in Anglo American and Hispanic American adolescents (N=1,094). Outcome measures assessed lifetime and 30-day marijuana and inhalant use. Predictors and covariates used in logistic regression analyses were region, grade, gender, knowledge, acculturation, familism, and parental monitoring. Hispanic Americans exhibited higher usage across all measures. In this group, high acculturation was associated with low marijuana, but high inhalant, use. Across all participants, positive family relations and parental monitoring were strongly associated with attenuated marijuana use hut only among those most knowledgeable about drugs. Familism and monitoring were not associated with diminished usage among the less knowledgeable. For inhalants, monitoring combined with high knowledge or high familism was associated with diminished usage. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Vote counting measures for ensemble classifiers

Various measures, such as Margin and Bias/Variance, have been proposed with the aim of gaining a better understanding of why Multiple Classifier Systems (MCS) perform as well as they do. While these measures provide different perspectives for MCS analysis, it is not clear how to use them for MCS design. In this paper a different measure based on a spectral representation is proposed for two-class problems. It incorporates terms representing positive and negative correlation of pairs of training patterns with respect to class labels. Experiments employing MLP base classifiers, in which parameters are fixed but systematically varied, demonstrate the sensitivity of the proposed measure to base classifier complexity.     

A formal model of asynchronous communication and its use in mechanically verifying a biphase mark protocol

We present a formal model of asynchronous communication between two digital hardware devices. The model takes the form of a function in the Boyer-Moore logic. The function transforms the signal stream generated by one processor into that consumed by an independently clocked processor, given the phases and rates of the two clocks and the communications delay. The model can be used quantitatively to derive concrete performance bounds on communications at ISO protocol level 1 (physical level). We use the model to show that an 18-bit/cell biphase mark protocol reliably sends messages of arbitrary length between two processors provided the ratio of the clock rates is within 5% of unity.     

爆破飞石的外弹道研究

本文利用现代外弹道数学理论，考虑了飞石的反弹作用和空气阻力作用，建立了飞石飞掷的数学物理模型，由此推导出爆破飞石飞掷距离计算公式。     

核素^147Pm在细胞内滞留的电镜放射自显影研究

木文用电镜放射自显影术研究了重核裂片~(147)Pm在体内亚细胞水平滞留动态。发现~(147)Pm的内污染沉积早期在血细胞和血管内皮细胞中,尤以在红细胞的沉积为多。~(147)Pm呈选择性滞留于肝细胞亚微结构中,可较多的掺入枯否细胞、肝细胞核和核仁内,在胞质中的糙面内质网、线粒体、微体和糖元中亦有滞留,且主要沉积于糙面内质网和线粒体,在高尔基复合体与糙面内质网所芽生的转移小泡融合处,亦有~(147)Pm滞留的放射自显影象。而在肾小体足细胞的线粒体和溶酶体中,有浓集的放射自显影径迹呈现。在肾近端小管曲部上皮细胞核中和胞质的线粒体和微体中,亦有较多的~(147)Pm滞留。 随着观察时间的延续,~(147)Pm在骨有机质亚微结构中呈现选择性、持续性的沉积增多。可浓集于破骨细胞和成骨细胞核中。此外在骨组织细胞间质中的胶原纤维部位,亦有较多的~(147)Pm沉积,难以排除。     

V型尾门在河工模型试验中的应用

尾门是河工模型中常见的装置,也是水位控制的关键设备之一.该文作者根据多年的经验,研制了一种新式尾门--V型尾门.该尾门具有调节精度高、稳定性好、操作方便等优点.并在多个模型中应用,取得了良好的控制效果.文章介绍了V型尾门的制作要点,并结合试验数据论述具体应用效果.