Physico-chemical properties of ceramic pigments for high-temperature application

Heat resistant coatings are required primarily for stacks, exhaust pipes, reactors, space crafts and similar equipments that are permanently or occasionally exposed to elevated temperatures. High-temperature coatings are generally based on silicone resin with ceramic and metallic pigments. In this study, iron oxide, cobalt oxide (thermo chromic compound) and aluminum oxide are used for the preparation of four new types of coloured pigments. The thermal resistant characteristics of these ceramic pigments were studied by differential thermal analysis, thermo gravimetric analysis and differential scanning calorimetric analysis. These ceramic pigments are found to be thermally stable up to 400 °C.     

Least-squares integration of one-dimensional codistributions with application to approximate feedback linearization

We study the problem of approximating one-dimensional nonintegrable codistributions by integrable ones and apply the resulting approximations to approximate feedback linearization of single-input systems. The approach derived in this paper allows a linearizable nonlinear system to be found that is close to the given system in a least-squares (L ₂) sense. A linearly controllable single-input affine nonlinear system is feedback linearizable if and only if its characteristic distribution is involutive (hence integrable) or, equivalently, any characteristic one-form (a one-form that annihilates the characteristic distribution) is integrable. We study the problem of finding (least-squares approximate) integrating factors that make a fixed characteristic one-form close to being exact in anL ₂ sense. A given one-form can be decomposed into exact and inexact parts using the Hodge decomposition. We derive an upper bound on the size of the inexact part of a scaled characteristic one-form and show that a least-squares integrating factor provides the minimum value for this upper bound. We also consider higher-order approximate integrating factors that scale a nonintegrable one-form in a way that the scaled form is closer to being integrable inL ₂ together with some derivatives and derive similar bounds for the inexact part. This allows a linearizable nonlinear system that is close to the given system in a least-squares (L ₂) sense together with some derivatives to be found. The Sobolev embedding techniques allow us to obtain an upper bound on the uniform (L _∞) distance between the nonlinear system and its linearizable approximation. This research was supported in part by NSF under Grant PYI ECS-9396296, by AFOSR under Grant AFOSR F49620-94-1-0183, and by a grant from the Hughes Aircraft Company.     

Edge detection,three-dimensional cell boundary reconstruction and volume and surface area estimation from differential interference contrast images

Three-dimensional (3-D) cell morphology is important for the understanding of cell function and can by quantified in terms of volume and surface area. Differential interference contrast (DIC, or Nomarski) imaging can enable cell edges to be clearly visualized in unstained tissue due to the slight difference in refractive index between aqueous media and cytoplasm. DIC is affected in only one direction - the direction of the optical shear. A 1-D edge detector was used in that direction with a scale length equal to that of an in-focus edge to highlight cell boundaries. By comparison with the signal from the edge detector on an out-of-focus slice, the in-focus slices could be segmented and, after noise suppression, cell outlines obtained. A voxel paradigm was used to calculate cell volume and differential geometry was used for surface area estimation. We applied this approach to obtain 3-D dimensional information by optical sectioning of motile Amoeba proteus.     

An Investigation of Milk Powders Produced by a Laboratory-Scale Spray Dryer

A mini spray dryer has been used to investigate morphological changes that occur to milk particles during the spray drying process. We have found that the mini spray dryer is ideal for such investigations, because phenomena such as skin and vacuole formation in particles can be analyzed without the added complication of particle agglomeration, which only occurs in much larger spray dryers where particle number concentrations are higher. We have confirmed observations made by various researchers that the bulk density of spray-dried milk powder is greatly affected by the drying temperature, due to the strong influence of the latter on the porosity of the particles. In addition, we have attempted to explain observations made by various workers that fat accumulates preferentially at the surface of a particle during drying by postulating that fluid fat is transported towards the surface, via a network of cracks and pores, by the development of a vacuole overpressure which is also responsible for the inflation of the particle. Finally, we have shown that milk powders can be spray dried a second time, by reconstitution with water, with no change to the thermodynamic characteristics of the resultant powder. Thus, milk concentrates for spray drying research can be prepared from already-spray-dried milk powders rather than using the more arduous evaporation method to concentrate unprocessed milk.     

低温聚合物结构松弛的数值研究

为了获得低温聚合物的参数和升降温速率对连续升降温无量纲比热容的影响,应用差示扫描量热法(DSC)和TNM的结构松弛模型作出简单的数值研究.结果表明,变换不同比率的升降温速率及不同参数值得到的DSC曲线图形变化能够对聚合物的结构松弛研究有一点参考作用.     

Changes in polymer foils used in food packaging tested by using differential scanning calorimetry

This work is an experimental study of the differential scanning calorimetry characterisation of polymer materials used in food packaging materials, such as polypropylene (0.03 mm), polyethylene (0.1 and 0.03 mm), poly(D-(-)-Β-hydroxybutyrate) (powder), two-layered polypropylene (0.064 mm), and two-layered polypropylene with poly-vinylidene-chloride (0.012/0.021). The polymer stability was checked by simulation of conditions during food preparation in microwave ovens, sterilisation or rapid freezing. The materials were tested in the temperature range from 40 to 200‡C at different scan rates from 2 to 30°C min⁻¹ during heating or cooling. The enthalpies show a high correlation coefficient (0.964) with scan rate. All samples undergo phase change in the temperature range from 107 to 173°C during heating and enthalpies are in the range from 31.8 to 71.1Jg⁻¹. Upon subsequent cooling from 200°C, the temperature range of phase changes is shifted to lower temperatures from 86 to 102°C with enthalpies ranging from 30.4 to 57.8 J g⁻¹. Experiments with exposure of polymers to microwave radiation and freezing prove that the phase change considering the temperature range is very similar in all experiments.     

Inductive proximity sensor with a flat coil and a new differential relaxation oscillator

A high-sensitivity flat-coil inductive proximity sensor microsystem has been realized and successfully tested. The flat coil, made with CMOS-compatible post processes, is connected to a versatile differential relaxation oscillator electronic interface. In this new and simple interface, the excitation, the signal extraction and amplification are assured by only one operational amplifier. Experimental results on the microsystem confirm that large output frequency variations occur when a metallic target approaches the sensor.     

钨系延期药预点火反应机理研究

通过程控升温模拟点火条件，根据ＤＳＣ图谱分析，找出主要反应区的温度范围。研究结果表明，钨系延期药预点火反应是一个真正的固－固反应。     

Nonlinear coupled problems in dynamics of shells

The coupled system of three partial differential equations governing a flexible shallow shell dynamics is analysed. No any prior assumptions about the temperature distribution through the shell thickness are applied. The efficiency of the method used here when applied to the solution of integral-differential equations with different dimensions (three-dimensional equations related to the Kirchhoff-Love model) and of different type (heat transfer equations and the hyperbolic equations of shell theory) is demonstrated. Many computational results are reported and discussed.