Long-term measurements of the concentrations of halocarbons in an urban area of Kraków, Poland

The results of the measurements of the concentrations of freons (F-11 and F-113), chloroform (CHCl₃), trichloroethane (CH₃CCl₃) and carbon tetrachloride (CCl₄) in air are presented. The data concern concentration measurements that have been conducted in Krakow since half way through 1997 to the end of 1999. The mean monthly values of these concentrations have been compared with the data from Mace Head, the station situated at a similar longitude as Krakow. It has been concluded that, in the observed period of time, the concentrations of the pollutants in Krakow are higher than in Mace Head. The mean monthly concentrations of F-11 and CCl₄ decrease in Krakow faster than in Mace Head (2.5 and 3.3 times, respectively). The concentrations of CHCl₃ and CH₃CCl₃ decrease at both locations, but the change is greater in Krakow. In Krakow, the observed increase of F-113 is 0.13 ppt/month and has an opposite trend than in the same period at Mace Head.     

一种直流力矩电机跑合防堵转控制电路

本文介绍了一种力矩电机跑合防堵转控制电路。作者对该电路的原理、使用和调试以及实验结果进行了描述。     

黄河下游滩区居民心理研究的设计及信息获取

特殊的自然环境，必将塑造滩区居民特有的心理状况，进而影响滩区社会经济的发展。黄河下游滩区居民心理研究从研究对象、技术路线与方法、数据来源等方面进行了调查设计；整群随机抽取河南、山东2个省6个县22个村作为调查对象，调查问卷分为“搬迁居民卷”和“未搬迁居民卷”，涉及题项分另？为82个和91个；采取入户调查填写问卷、座谈、个案访谈等方式，共获得相关资料1021份。     

降凝剂对高蜡稠油的改性效果及机理研究

实验研究了工业品原油降凝剂WHP改善含蜡56.9%、其中96.6%为正构烷烃的胜利郑王庄稠油流动性的效果。WHP含乙烯/醋酸乙烯/乙烯醇嵌段聚醚三元共聚物30%-35%。在60℃将WHP加入稠油中,测定其凝点和32℃、0-42.6 s^-1范围5个剪切速率下的黏度,均随WHP加量的增加（50-300 mg/L）而降低,200 mg/L为最佳加量,在该加量下0.32 s^-1黏度由34.16 Pa·s降至79.2 mPa·s,凝点（℃）、屈服值（Pa）、稠度系数（Pa·s^n）分别由49.0、32.42、31.57降至39.5、0.1297、0.02142,流型指数由0.1176升至0.9790。由黏温曲线求出,加入200mg/L WHP使该稠油析蜡点由65℃降至58℃,反常点由70℃降至50℃。根据空白和加剂原油扫描电镜照片显示的蜡晶形态,利用共晶机理分析讨论了WHP这种高分子表面活性剂的降凝、降黏、改善流动性的作用。图3表3参5。     

杜84断块超稠油开发中后期稳产对策研究

对杜84断块超稠油生产中后期暴露的主要矛盾，即随着轮次升高，周期吞吐效果变差，井下技术状况日益变差。油层动用不均，汽窜加剧等问题进行了分析。并提出了相应的稳产对策-实施多井整体吞吐，大修复产，调剖等措施。现场应用证明，这些措施基本能够确保杜84断块超稠油中后期的稳产。     

三峡工程明渠提前截流方案及水力学试验研究

论述了三期明渠提前截流方案的综合比较分析及截流水力学试验研究成果。认为拟定的提前截流诸方案各有利弊 ,其截流难度较初设方案显著增加。对于截流“基本方案”及“比较方案”的成功实施 ,必须辅之以一定的工程技术措施降低截流难度     

ispLSI1032E器件及其应用

介绍了Lattice公司的大规模集成电路ispLSI1032E,它是一种在系统复杂可编程逻辑器件(CPLD),借助于EDA设计软件可以随时更改芯片的功能,而且不需要改动印制电路板(PCB)的结构,大大提高了系统设计的效率,并保证了设计的正确性。最后设计了基于该芯片的EDA教学实验系统。     

In Situ Formation of a Novel Nanocomposite Structure Based on MCM-41 and Polyethylene

M41S materials are prepared by in situ assembly of inorganic precursors and organic template and can be viewed as nanocomposites of the siliceous phase and organic surfactant. Calcination of these precursors gives the M41S materials that have been used to prepare novel nanocomposite structures, in which the organic phase inside the nano-sized pores is isolated by the nano-sized inorganic pore walls. The nanocomposite structures can be formed by in situ polymerization of monomers inside the channels. Polymerization of ethylene takes place inside the nano-sized pores, producing the desired nanocomposite structure. The resulting polyethylene was found to be a mixture of crystalline and amorphous phases.     

城市燃气管网设计若干问题的探讨

分析了哈依燃气管道工程在施工及管理过程中存在的问题，并就如何解决这些问题提出了建议。