中子寿命测井在评价管外窜槽中的应用

管外窜槽已成为制约中原油田注水开发的障碍，并造成了严重的经济损失。文中分析了管外窜槽的形成机理，重点介绍了注硼中子寿命测井技术用于管外窜槽监测的原理、工艺及解释方法。结合中原油田的应用实例，论证了中子寿命测井评价管外窜槽的有效性，为油藏动态监测提供了有效手段。     

变形观测与高精度测量机器人系统

介绍了中南大学自行研制开发的高精度测量机器人系统的组成，工作原理，以及该系统实现高精度观测所采取的主要措施；仪器室内检定，野外边频同测，高精度气象改正，周日观测等，同时以某电站大坝的变形观测为例，简单介绍该系统可达到的精度及工程应用领域。     

工业炉燃烧系统应用技术探讨

燃烧及其控制技术是各种火焰炉技术核心，强调高水平燃烧系统应对燃烧全过程进行控制，着重对燃烧系统点火、火焰监测、空燃比比例调节、燃烧过程各参数监控、炉温自动控制等各个方面内容进行了讨论介绍，最后用某天然气加热炉燃烧系统原理图及应用效果进行实例说明。     

新丰江大坝监测自动化系统的成功实施与现场维护

本文介绍了新丰江大坝监测自动化系统从失败走向成功的实施过程，强调了良好的工作环境以及精心的现场维护在大坝监测自动化应用中的重要性。     

Sub-optimal solutions to track detection problem using graph theoretic concepts

This paper demonstrates how the problem of tracking targets, which appear as either straight or curved lines in two-dimensional display images (or data images) can be formulated in terms of a directed weighted graph model and how dynamic programming techniques can be efficiently applied to reach an optimal or sub-optimal solution. In general, track detection algorithms providing optimal solutions have good detective ability, but most of them suffer from the inability to detect discontinuous lines or to resolve efficiently pairs of crossing lines. A sub-optimal solution is provided that efficiently overcomes these weaknesses. We focus on modeling the track detection problem in terms of a graph, formulating fast sequential/parallel sub-optimal track detection algorithms and testing them on simulated data in order to show their detective ability. Moreover, we specify the conditions under which sub-optimal algorithms can perform at least as well as their corresponding optimal algorithms. This is significant for the track detection problem where fast, accurate and real-time detection is considered a necessity.     

一种评价机器磨损和润滑油质量的新方法

提出用表征大型机械系统健康状态的相对劣化度作为监控机械磨损状态和油品质量变化的综合判断指标，以便结合反映机器工作状态的其它因素，共同评定机器的健康状态。以柴油机为例，对监测得到的柴油机润滑油的铁谱参数、磨损金属元素含量和油品理化性能等数据进行综合分析和处理，所得相对劣化度的变化趋势，较准确地反映了柴油机的工作状况。该方法不仅简单实用，而且便于将油液监测技术与其他监测技术（如振动诊断技术）结合起来，用一统一指标描述机器的健康状况，达到监测和预报的目的，为开发基于多种监测技术的智能诊断系统打下基础。     

Preparation of polyimide-epoxy composites

The formation of a three dimensional network of crosslinked epoxy leads all unmodified epoxies to have inherent brittleness and relatively low degradation temperatures. Polyimides, on the other hand, are widely used for applications that require high degrees of flexibility and thermal resistance. Here, we have focused on the preparation of epoxy systems cured with polyamic acids instead of traditional amino-group-containing hardening agents. The cure behavior and potential reaction mechanisms of EPON 828 resin and polyamic acid mixtures were evaluated by DSC and TGA. Thermal analysis showed a complex reaction sequence taking place in the mixture and also determined the extent of reaction of the polyamic acid with itself and the competitive reaction of the polyamic acid with the epoxy. The compositions of the mixtures were varied to see the dependence of the cure behavior on component concentrations. Solutions of the two components did not phase separate and also phase separation was not apparent either optically or microscopically in the cured samples. This phase behavior was attributed to a unique in situ reaction. A novel solvent system for the polyamic acid precursor was also used.     

A damage identification technique for CF/EP composite laminates using distributed piezoelectric transducers

In this study, a damage identification approach was developed for carbon fibre/epoxy composite laminates with localized internal delamination. Propagation of the Lamb wave in laminates and its interaction with the delamination were examined. The fundamental symmetric Lamb wave mode, S₀, and the lowest order shear wave mode, S₀^′, were chosen to predict damage location. A real-time active diagnosis system was therefore established. This technique uses distributed piezoelectric transducers to generate and monitor the ultrasonic Lamb wave with narrowband frequency. The two-way switches were employed to minimize the number of transducers. A signal-processing scheme based on the time–frequency spectrographic analysis was utilised to extract useful diagnostic information. Also, an optimal identification method was applied on damage searching procedure to reduce errors and obtain the diagnostic results promptly. Experiments were conducted on [0/−45/45/90]_s CF/EP laminates to verify this diagnosis system. The results obtained show that satisfactory detection accuracy could be achieved.     

Optimal Solutions for the Temporal Precedence Problem

Abstract. In this paper we refer to the Temporal Precedence Problem on Pure Pointer Machines . This problem asks for the design of a data structure, maintaining a set of stored elements and supporting the following two operations: insert and precedes . The operation insert (a) introduces a new element a in the structure, while the operation precedes (a,b) returns true iff element a was inserted before element b temporally. In [11] a solution was provided to the problem with worst-case time complexity O (log log n ) per operation and O(n log log n) space, where n is the number of elements inserted. It was also demonstrated that the precedes operation has a lower bound of Ω (log log n ) for the Pure Pointer Machine model of computation. In this paper we present two simple solutions with linear space and worst-case constant insertion time. In addition, we describe two algorithms that can handle the precedes (a,b) operation in O (log log d ) time, where d is the temporal distance between the elements a and b .     

Synchronization models for multimedia presentation with user participation

This paper addresses the key issue of providingflexible multimedia presentation with user participation and suggests synchronization models that can specify the user participation during the presentation. We study models like the Petrinet-based hypertext model and the object composition Petri nets (OCPN). We suggest adynamic timed Petri nets structure that can model pre-emptions and modifications to the temporal characteristics of the net. This structure can be adopted by the OCPN to facilitate modeling of multimedia synchronization characteristics with dynamic user participation. We show that the suggested enhancements for the dynamic timed Petri nets satisfy all the properties of the Petri net theory. We use the suggested enhancements to model typical scenarios in a multimedia presentation with user inputs.