吸油烟机控制器设计与抗干扰技术

将单片机控制技术融入到家电设计,实现家电智能化,提高其性价比。本文基于盛群单片机HT45R35的应用开发,设计一款吸油烟机控制器,通过硬件及软件优化设计,降低单片机应用成本,提高其工作稳定性。     

Thermal transport behavior of van der Waals solids and liquids in the neighborhood of the solid-liquid phase transition

The thermal conductivity, , is one of the few transport coefficients which shows a relatively small change at the solid-liquid phase transition, and hence it is a property that can be used in comparing dynamic properties of both ordered and disordered systems. Although the discontinuity in can be accounted for largely by the difference in density, , of solid and liquid at the phase transition, its volume dependence is examined more closely. The thermal diffusivity, which is known to dominate the dynamic structure factor of liquid argon, has been determined around the phase transition also; the sound velocity has been considered in addition. The results are discussed and a comparison is made with these properties in solid and liquid benzene and cyclohexane.Paper presented at the Ninth Symposium on Thermophysical Properties, June 24–27, 1985, Boulder, Colorado, U.S.A.     

Electrical transport in UNi0.5Sb2 single crystals

Single crystals of UNi₀.₅Sb₂ were investigated by means of Seebeck coefficient and Hall effect measurements in the temperature range 5–300 K. The results corroborated the occurrence of two magnetic phase transitions: from para- to antiferromagnetic state at T_N = 161.5 K and a spin-reorientation near T_t = 64 K. The first-order character of the latter feature was proved by studying in detail the electrical resistivity and the magnetic susceptibility of single-crystalline UNi₀.₅Sb₂ in the vicinity of T_t.     

Synthesis,Micellization, and Surface Activity of Novel Linear-Dendritic Carboxylate Surfactants

Two generations of novel linear-dendritic carboxylate surfactants C₁₈-G₁-(COONa)₂ and C₁₈-G₂-(COONa)₄ have been synthesized by the divergent method and their structures are characterized by ¹H Nuclear Magnetic Resonance and Infrared analysis. The electrical conductivity measurement is used to measure the Krafft temperatures of C₁₈-G₁-(COONa)₂ and C₁₈-G₂-(COONa)₄, which are much smaller than those of the corresponding conventional surfactant sodium stearate. The markedly enhanced solubility of two linear-dendritic surfactants is ascribed to the high hydrophilicity of surfactant headgroups induced by the carboxylate and ester groups. The critical micelle concentration (CMC) values obtained from both the electrical conductivity and surface tension measurements indicate that the micellizations of linear-dendritic surfactants become favorable with the increase in the number of the surfactant headgroup. However, the surface activity parameters including the surface tension at the CMC, maximum surface excess, and minimum surface area reveal that C₁₈-G₁-(COONa)₂ exhibits greater efficiency in absorbing at the air/water interface compared to C₁₈-G₂-(COONa)₄, owing to their different steric repulsions of the surfactant headgroups. In addition, C₁₈-G₁-(COONa)₂ and C₁₈-G₂-(COONa)₄ have higher emulsifying ability than the conventional surfactants sodium stearate and sodium octadecyl sulfate.     

大型软包锂离子电池的热物性实验研究

针对大型软包锂离子电池热物性参数的测定问题,提出适用于该型电池的热参数表征方法. 基于准稳态导热原理,建立电池的传热理论模型. 开展实验研究电池的比定压热容和导热系数与温度的依变关系,分析热损对测试结果的影响,对测试方法的有效性进行验证. 结果表明,电池比定压热容随着温度的升高而线性增大,导热系数受温度的影响较小. 在900 s内可以测得电池热参数在10~60 °C下的变化状况,实验验证结果显示测算精度高于92.3%,具有测算周期短、准确度高和测试灵活等优势.     

稀土元素对钯室温电学性能的影响

研究了稀浓度(0.6at％以下)稀土元素(La、Ce、Pr、Nd、Sm、Eu、Gd、Tb、Dy、Er、Yb)对钯的室温电学性能的影响。所有稀土元素均提高钯的电阻率(p)、降低电阻温度系数(α),实验结果与理论分析证明(p·α)_((?)d-RE)d=(p·α)_(Pd)。Gd以前的稀土元素降低钯的对铜热电势(ε),其余重稀土元素增大钯的对铜热电势。按0.1at％RE归一化处理的实验数据表明,轻稀土元素对钯电阻率的影响稍大于重稀土,但Ce、Eu、Yb呈反常影响,化合价和尺寸因素是影响电学性能的主要因素。     

Pore-level numerical simulation of methane-air combustion in a simplified two-layer porous burner

A simplified two-dimensional model of two-layer porous burner based on pore level is developed.The heat transfer of solid phase in porous burner is seen as the synergistic effects of conduction through con-necting bridges and surface radiation between the solid particles in the model.A numerical simulation study on the characteristics of flow,combustion and heat transfer in the two-layer porous burner is car-ried out using the pore level model,and the effects of the control parameters such as the inlet velocity and solid thermal conductivity on thermal non-equilibrium are investigated.The results show that the flame structure is highly two-dimensional based on pore level.Obvious thermal non-equilibrium in the burner for the two phases and solid phase are observed,the largest temperature difference between the gas and solid phases is observed in combustion zone,while the temperature difference inside the solid particles is largest near the flame front.The results also reveal that thermal non-equilibrium of por-ous burner is much affected by the inlet velocity and solid thermal conductivity.     

炭黑对ASA/天然石墨复合材料的电磁屏蔽性能影响

通过熔融共混方法制备导电高分子复合材料丙烯腈-苯乙烯-丙烯酸酯共聚物(ASA)/天然石墨(NGR)/炭黑(CB),采用电磁屏蔽测量仪、四探针电阻率测量仪和动态热机械分析仪对复合材料的电性能和力学性能进行详细研究。结果表明,ASA/NGR复合材料的体积电阻率随着炭黑含量增加而增加;同时在30 MHz~1500 MHz范围内,复合材料的电磁屏蔽性能从28 dB提高到38 dB,符合商业要求。炭黑的加入大大改善了材料力学性能,弯曲强度从31 MPa增加到41 MPa;动态储能模量从4.6 GPa增加到14.5 GPa。     

强化三元混合熔盐的传热性能的实验研究

太阳能发电技术中传热性能的优劣影响着太阳能的利用程度。选用石墨作为强化相变材料传热性能的添加剂与三元混合熔盐（K₂CO₃-NaCl-Li₂CO₃）按照石墨质量分数为5%、10%、15%进行混合制备,使用TC3000通用型导热系数测试仪测定16种试样的导热系数。并测试经历300次循环储能、释能实验试样的导热系数循环稳定性。实验结果表明：添加石墨后的混合相变材料导热系数最高可提升至原混合材料的3.38倍,当石墨的质量分数为15%时,混合相变材料的导热系数最大。在经历300次储能、释能实验后,材料的导热系数基本保持稳定,变化浮动不高于15%。石墨作为强化材料的添加剂,可有效提升强化材料的传热性能,具有实际工程的应用价值。     

Processing of yttria partially stabilized zirconia thermal barrier coatings implementing a high-power laser diode

Several studies have been undertaken recently to adapt yttria partially stabilized zirconia (YPSZ) thermal barrier coating (TBC) characteristics during their manufacturing process. Thermal spraying implementing laser irradiation appears to be a possibility for modifying the coating morphology. This study aims to present the results of in situ (i.e., simultaneous treatment) and a posteriori (i.e., post-treatment) laser treatments implementing a high-power laser diode. In both cases, the coatings underwent atmospheric plasma spraying (APS). Laser irradiation was achieved using a 3 kW, average-power laser diode exhibiting an 848 nm wavelength. Experiments were performed to reach two goals. First, laser post-treatments aimed at building a map of the laser-processing parameter effects on the coating microstructure to estimate the laser-processing parameters, which seem to be suited to the change into in situ coating remelting. Second, in situ coating remelting aimed at quantifying the involved phenomena. In that case, the coating was treated layer by layer as it was manufactured. The input energy effect was studied by varying the scanning velocity (i.e., between 35 and 60 m/min), and consequently the irradiation time (i.e., between 1.8 and 3.1 ms, respectively). Experiments showed that coating thermal conductivity was lowered by more than 20% and that coating resistance to isothermal shocks was increased very significantly.