Mössbauer study of the thermal decomposition of FeS2 in coal

The Mössbauer effect has been used to study the transformations of FeS₂ in four different coals: IL No. 6, Ky $\text{9}\text{14}$, Blacksville No. 2, and Powhatan No. 5. The transformations of FeS₂ in the coals were studied in an inert atmosphere. It was observed that the pyrrhotites formed from FeS₂ have a considerable reduction in the isomer shift at 440 °C as compared to the values obtained in the absence of coal. This effect is associated with the interaction of the pyrrhotites with the coal constituents at high temperatures. There is also a significant line-broadening at 440 °C. This broadening is due either to vacancy motion in the iron sulphides and/or to motional broadening due to particle motion in the coal-derived liquids. The percentage conversion of pyrite to pyrrhotite depends markedly on time as well as type of coal. The weathering of the coal has a detrimental effect on the rate of conversion of pyrite to pyrrhotite. The ferrous sulphate layers covering the pyrite particles hinder the removal of sulphur from that surface. The major factor affecting the $\text{Fe}\text{S}$ ratio is the total amount of sulphur available for H₂S formation. Partial H₂S pressure is the crucial quantity controlling the stoichiometry of the pyrrhotites. Hence, a high percentage of H₂S in the reactor at high temperature will assure the formation of pyrrhotites with a high number of metal vacancies.     

Carbon nanofibers: Synthesis, characterization, and electrochemical properties

Carbon nanofibers (CNFs) have been synthesized by co-catalyst deoxidization process by a reaction between C₂H₅OC₂H₅, Zn and Fe powder at 650 °C for 10 h. These nanofibers exhibit diameters of ∼80 nm and lengths ranging from several micrometers to tens of micrometers. X-ray diffraction, Raman spectroscopy, and high-resolution transmission electron microscopy indicate that as-prepared CNFs possess low graphitic crystallinity. The resultant CNFs as electrode shows capacity of ∼220 mAh/g and high reversibility with little hysteresis in the insertion/deintercalation reactions of lithium-ion. In addition, the possible growth of CNFs is discussed.     

Electrochemical pre-treatment of effluents containing chlorinated compounds using an adsorbent

Electrochemical pre-treatment of industrial wastewater to remove refractory and/or toxic organic components, making them more amenable to biological treatment, is likely to be more cost-effective than using a physical or chemical process for complete organic removal. This paper demonstrates the use of a carbon-based adsorbent material that preferentially removes chlorinated organic compounds. Electrochemical regeneration of the adsorbent is shown to be a quick, easy and cheap process, because the adsorbent is both highly electrically conducting and non-porous. High regeneration rates over a number of cycles were obtained by passing a charge of 25 C g⁻¹ through a bed of adsorbent particles, at a current density of 20 mA cm⁻² for 10 min. The energy required to remove a kg of COD from an industrial wastewater was calculated to be 27 kWh.     

Electrochemical properties of carbon-coated CaWO4 versus Li

Carbon-coated CaWO₄ nano-crystalline phases have been synthesized by ambient temperature solution precipitation method, characterized by X-ray diffraction, SEM and thermogravimetry and their electrochemical properties were studied versus Li metal. Galvanostatic cycling at a current of 60 mA/g in the voltage range 0.005-3.0 V on the 5 wt.% C-coated CaWO₄ gave a reversible capacity of 230 ± 5 mAh/g corresponding to 2.5 mol of Li, which is almost stable from 20 to 50 cycles. Under the same conditions, the 10 wt.% C-coated CaWO₄ showed a capacity of 355 ± 5 mAh/g (3.8 mol of Li) during the initial cycles, but the capacity degraded at a rate of 1.6 mAh/g per cycle in the range 5-100 cycles. A good operating voltage range was found to be 0.005-3.0 V with average discharge and charge potentials being 0.6 and 1.3 V, respectively. Coulombic efficiency in all cases was 96-98%. Cyclic voltammograms compliment the galvanostatic results. Impedance spectral data on the 10 wt.% C-coated CaWO₄ at different voltages during the first and 20th discharge-charge cycle have been interpreted in terms of the variations in the bulk and charge-transfer resistances of the composite electrode. A reaction mechanism involving the formation/decomposition of the oxide bronze, ‘Li_xWO_y’ has been proposed to explain the electrochemical cycling.     

对甲基苯甲酸液相催化氧化动力学

研究了以醋酸钴和醋酸锰为催化剂、氢溴酸为促进剂,在169～192 ℃下对甲基苯甲酸(p-TA)的液相氧化反应动力学.采用幂函数动力学模型对实验数据进行了拟合.结果表明,对甲基苯甲酸液相氧化反应是串联反应,甲基苯甲酸和中间产物对羧基苯甲醛的反应级数均为1.拟合得到的活化能数据表明对甲基苯甲酸氧化为整个反应的控制步骤.利用该动力学模型能够成功预测186 ℃下液相组分随时间的变化趋势.实验表明,当金属离子的配比满足[Co2 ]/[Mn2 ]为3∶1时,催化剂具有最高的活性.     

Electrosynthesis of poly(neutral red) incorporated with ferrocenesulfonic acid

The electrochemical oxidation of neutral red in 0.5 mol dm⁻³ sulfuric acid and 0.2 mol dm⁻³ ferrocenesulfonic acid solution was carried out using repeated potential cycling between −0.20 and 1.40 V (versus SCE). The polymer film was electrochemically deposited on a platinum anode and had an electrochemical activity in the solution of 0.5 mol dm⁻³ Na₂SO₄ with pH ≤ 7.0. The result from the X-ray photoelectron spectroscopy (XPS) experiment shows that the anions can be doped into the polymer film during the electrochemical polymerization reaction of neutral red. The scanning electron microscopy (SEM) micrograph shows that the surface of the resulting polymer film formed on the platinum foil is covered with a compact surface consisting of micro fibers. The visible spectrum and infrared spectrum (IR) of the polymer are different from those of the corresponding monomer. A possible chemical structure of the resulting polymer was also proposed.     

Electrochemical insertion of lithium ions into disordered carbons derived from reduced graphite fluoride

Both covalent (obtained by direct fluorination at high temperature) and semi-ionic carbon fluorides (synthesized at room temperature) were reduced in order to obtain disordered carbons containing very small content of fluorine and different physical properties according to the reduction treatment (chemical, thermal or electrochemical). After a physical characterization (X-ray diffraction, electron spin resonance and FT-IR spectroscopies), the electrochemical behaviours of the pristine carbon fluorides and of the treated samples were investigated during the insertion of lithium using liquid carbonate-based electrolytes (LiClO₄-EC/PC, 50:50%, v/v). Both galvanostatic and voltammetric modes were performed and revealed that the voltage profiles and the capacities differed according to the starting material and the reduction treatment. Semi-ionic carbon fluoride treated in F₂ atmosphere for 2 h at 150 °C and then chemically reduced in KOH exhibits high reversible capacities (the reversible capacity is 530 mAh g⁻¹ in the second cycle); in this case, the voltage profiles show a large flat portion at potentials lower than 0.3 V which is attributed to the insertion/deinsertion of lithium ions between the small graphene sheets and/or the absorption of pseudo metallic lithium into the microporosity of the sample. Nevertheless, a part of the lithium ions are removed at potentials higher than 0.5 V versus Li⁺/Li limiting the useful capacity.     

Electrochemical insertion of sodium into hard carbons

The electrochemical insertion of sodium ions into different types of hard carbons was achieved in electrolytes composed of ethylene carbonate as the solvent and NaClO₄ as the salt. For all the materials studied the sodium uptake increases when the carbon highest heat treatment temperature (HTT) decreases. PAN-based carbon fibres appear to be suitable structures to allow significant sodium insertion. Thus, T650 ex-PAN fibres lead to a reversible capacity close to 209 mAh g⁻¹. In that case, sodium insertion occurs in two main ways: one is the adsorption on the single graphene layers and the other is the concomitant insertion into the porosity that occurs below 0.1 V versus Na⁺/Na. This second mechanism, which is indicated by a low-voltage plateau on the electrochemical curves, allows significant insertion. The compared electrochemical study of two saccharose-coke samples corresponding to different regions of Dahn's classification underlines the importance of the carbon precursor and of the manufacture process. The reversible capacity is equal to 184 mAh g⁻¹ for the sample heat treated at 800 °C which presents a high hydrogen content whereas it is close to 145 mAh g⁻¹ for the one characterized by a HTT of about 1500 °C and a low hydrogen content. The best electrochemical performances are obtained for pyrolyzed cellulose carbons. Indeed, the reversible capacity is about 279 mAh g⁻¹. Outgassing these carbons at 950 °C results in such a decrease of the reversible capacity down to 145 mAh g⁻¹. That can be related either to the thermal elimination of heteroelements or to modifications of the pore size distribution. Consequently, the most suitable hard carbon material for anodic applications in rechargeable sodium-ion batteries should both present a high residual hydrogen content and a significant microporosity.     

Acid-base reactions on model MgO surfaces

Three MgO surfaces of different structures have been employed as models for study of the acid-base properties of MgO. Surface spectroscopies including XPS, UPS, and ISS were used to determine the nature and the absolute coverage of surface intermediates, and the nature of bonding sites upon adsorption of Brønsted acid molecules on these surfaces. Different behavior patterns of the Brønsted acid molecules with varying strengths on the three model surfaces provide insights into the site requirements for dissociation of Brønsted acids on MgO. The base-catalyzed Cannizzaro reaction of formaldehyde was observed on these model surfaces under UHV conditions.