Growth of β-FeSi2 layers deposited from a molten salt

β-FeSi₂ layers have been successfully grown using a molten salt method for the first time. It was found that single phase and homogeneous β-FeSi₂ layers with a columnar domain structure can be grown on FeSi substrates. The layer thickness was demonstrated to be controllable by the growth temperature and time, and was diffusion controlled. It was shown that the layers were void- and crack-free compared to similar layers grown on Fe substrates: this difference is explained in terms of Fe diffusion. This vacuum-free simple growth technique is useful for the fabrication of large area semiconductor devices at low cost.     

Immunoelectron localization of mitochondrial F1 factor in cryosections of heart muscle cells

Immunocytochemistry was used to investigate the localization of F1 ATPase in mitochondria of cryosections of adult mouse heart muscle cells. The initial aldehyde fixation was the only denaturation step for antigens. The fine structure was preserved with contrast enhancement as the sections were maintained hydrated, with the advantage that the entire procedure is completed in one working day. The reaction was highly specific, and entire mitochondria were labeled with the Protein A-gold complex. A new analytical technique, electron spectroscopic imaging (ESI), contributed to a better visualization of the localization of the F1 factor.     

Characterization of EBPVD micro-layer composites and simulation of its internal stress state

Based on the basic operating principal and the technology characteristic of electron beam physical vapor deposition(EBPVD) technique, EBPVD was used to prepare the micro-layer composites. The effect on the substrate preheating temperature was taken into accounts and the finite element analysis package ANSYS was used to simulate the internal stress field and the potential displacement changing tendency. The results show that one of the most important quality factors on the judgment of micro-layer composites is the adhesion between the substrate and the deposition layers as well as among the different deposition layers. Besides the existance of temperature gradient through the thickness of layers, the main reason for the internal stress in micro-layer composites is the mismatch of various properties of the layer and the substrate of different thermal expansions and crystal lattice types. With the increase of substrate preheating temperature, the inter-laminar shear stress also takes on a tendency of increase but the axial residual stress decrease.     

爆炸焊接——热轧双相不锈钢复合钢板研制

本文主要阐述了通过爆炸焊接和热轧的方法,研制成功可焊性良好的且具有较好强度、韧性与综合性能的双相耐应力腐蚀的不锈复合钢板。还将热轧与热处理的两种试验作了较全面的常规、特殊检验试验,结果完全达到使用要求。     

用单透镜变换由多模光纤出射的大功率Nd：YAG激光束的特性

根据理论假设，通过选取单透镜的参数和位置，计算说明了单透镜使经由多模光纤出射的大功率Ｎｄ：ＹＡＧ激光束的发射角压缩，光束聚焦效率提高，光束截面场为高斯分布；文中的计算结果符合已知规律，从而说明了理论假设的正确性。     

不锈钢管子—管板的激光焊接

试验研究了不锈钢的深溶焊接。研究了聚焦光束回转的光具。在工件不动的情况下,焊接管子—管板连接环缝。焊缝质量满足压力容器的要求,焊接效率大大提高。     

异质谷间转移电子器件的计算机模拟

使用弛豫时间近似求出了描述两能谷间电子交换的方程。在此基础上建立了双能谷电子的连续性方程和油松方程。对具体的ＧａＡｓ／ＡｌｘＧａ１－ｘＡｓ异质谷间转移电子器件结构求解了这些方程组，得到了直流工作时器件内的电场分布、双能谷中载流子的布居以及两个能谷的电流分布。这些结果正好和常规Ｇｕｎｎ器件相反，说明了两种器件的不同工作机理。最后通过对低Ａｌ组份势垒结构的计算说明了Ｘ谷电子注入对器件工作的重要作用。     

电子束、离子束与蓝宝石相互作用的研究

研究了电子束、离子束作用于Al2O3表面时成分的变化，表明无论电子束或离子束都能使Al2O3发生分解，产生导电的元素Al。实验在PHI610·SAM上进行，电子束轰击下（3keV，O．5μA，入射角60°）10s就有元素Al分解出来，2min以后就达到饱和，分解析出量随时间成a（1－e－bt）的关系。离子束轰击下同样发生元素Al的分解，但当Ei＞3keV时，由于剥离速率加大，溅射5min时表面Al峰反而比1min时要弱。这时表面Al含量处于分解析出与溅射剥离的动态平衡中。实验还发现了Al2O3的解析与表面成分有关（如碳的含量）。最后讨论电子束与离子束的解析机理。     

反应离化团束（RICB）法生长CN硬质薄膜

用反应离化团束（ＲＩＣＢ）法，以低分子量聚乙烯为蒸发材料，氨气为反应气体，在ＮａＣｌ（１００）和Ｓｉ（１００）衬底上淀积Ｃ－Ｎ薄膜，透射电子衍射（ＴＥＭ）分析表明薄膜中含有β－Ｃ３Ｎ４晶粒，Ｘ射线光电子谱（ＸＰＳ）和红外吸收谱（ＩＲ）表明存在Ｃ，Ｎ原子的化学键合。     

有限周期梁用动力消振器抑振的特性

本文用弯曲波方法导出了多支承梁加动力消振器位移响应的普遍表达式。理论分析发现了周期结构用动力消振器抑制振动的一些新特性：（１）仅用一个动力消振器可抑制周期结构对应传递频带内的一组共振峰。被抑制的共振峰的数量与跨距的数量和消振器的布置位置有关；（２）动力消振器调谐频率与对应传递频带的第一个共振频率相关联。当动力消振器与作用在梁上的外载荷作用在同一点时，最佳调谐频率比总是大于１，否则最佳调谐频率比小于１。