电站取水河段长时段的泥沙淤积特性研究（注：研究生论坛）

摘 要:为解决将数学模型运用于电站取水口长时段内的河床演变问题,从而引起计算效率与精度不足的缺陷。本文采用基于隐式与显式结合的算法,探索河道长时段的泥沙淤积特性,建立能模拟长时段河床演变的水沙数学模型,并将该模型应用于昭化电站取水河段泥沙冲淤模拟。通过物理模型与数学模型在不同频率洪水下取水口水位和流速的比较结果,表明此数学模型可以较好模拟取水口水流特性;通过预测昭化电站拉沙方案与不拉沙方案下取水河段运行多年后的河床演变,结果表明此数学模型模拟结果与实际工程结果相似,符合客观规律,能较好模拟河段的泥沙问题。     

Performance of fluorine-added CoMoS/Al2O3 prepared by sonochemical and chemical vapor deposition methods in the hydrodesulfurization of dibenzothiophene and 4,6-dimethyldibenzothiophene

The performance of a new type of CoMoS/Al₂O₃ catalyst, with added fluorine and prepared by sonochemical and chemical vapor deposition (CVD) methods, was investigated in the hydrodesulfurization (HDS) of dibenzothiophene (DBT) and 4,6-dimethyldibenzothiophene (4,6-DMDBT). The catalyst, which was designed to contain optimum amounts of fluorine and cobalt, exhibited a higher activity, ca. 4.6 times higher activity particularly in the HDS of 4,6-DMDBT, than a fluorine-free catalyst prepared by a conventional impregnation method. The enhanced activity of the new catalyst can be attributed to the cumulative effects of individual factors involved in the catalyst preparation. That is, the use of a sonochemical synthesis led to a high dispersion of small MoS₂ crystallites on the alumina, and the addition of the Co species to the catalyst by CVD caused a close interaction between the Co species and the MoS₂ crystallites to produce numerous CoMoS species, which are the catalytically active species for HDS. The addition of fluorine increased the amounts of acidic sites in the catalyst, which promoted hydrogenation (HYD) route to a greater extent than the direct desulfurization (DDS) route in DBT HDS and both HYD and DDS routes to similar extents in the case of 4,6-DMDBT HDS. Accordingly, the addition of fluorine led to a greater increase in catalytic activity for 4,6-DMDBT HDS than for DBT HDS.     

Mass production of high-quality multi-walled carbon nanotube bundles on a Ni/Mo/MgO catalyst

A new catalyst (Ni/Mo/MgO) is reported, with which one can synthesize multi-walled carbon nanotube (MWNT) bundles with a yield of more than 45 times the amount of the pristine catalyst, using a methane-hydrogen mixture as precursor. Powder X-ray diffraction, Raman spectroscopy and thermal gravimetric analysis show that the purity of the as-prepared MWNTs is over 97%. The diameter of the carbon nanotubes is 9-20 nm, measured by high-resolution electron microscopy on 421 individual MWNTs. The high purity of the as-prepared MWNTs allows us to omit the usual complex purification process required for carbon nanotubes synthesized by chemical vapor deposition. Because of its durable high activity, the Ni/Mo/MgO catalyst in its pristine state is ideal for mass production of high-quality MWNTs. The synergism of nickel and molybdenum is considered the main reason for the high yield of carbon nanotubes.     

碳沉积法制富氮用炭分子筛的研究

本文提出的碳沉积法是用煤焦油馏分油的有机溶液浸渍煤炭化物,然后热解以进行“孔调变”。确定了最佳工艺条件,制得富氮性能良好的炭分子筛。并用D-A方程求取了各种样品的微孔结构参数。     

Propylene epoxidation over Ti/MCM-41 catalysts prepared by chemical vapor deposition

Ti-containing mesoporous catalysts were prepared by chemical vapor deposition (CVD) of TiCl₄ on silica MCM-41 in the 700–900 °C temperature range. These samples were characterized (with XRD, ICP, nitrogen adsorption, FT-IR, ESCA, and TEM) and evaluated for the epoxidation of propylene with two alkyl hydroperoxides. The increase of CVD temperature resulted in the decrease of titanium content, catalyst hydroxyl population, crystallinity, and surface area. Catalyst selectivity to the desired product – propylene oxide – was highly sensitive to the deposition temperature. The best Ti/MCM-41 catalyst was prepared at the temperature of 800 °C, which had the maximum propylene oxide yield of 94.3%.     

Preparation of methanol oxidation electrocatalysts: ruthenium deposition on carbon-supported platinum nanoparticles

Methanol oxidation electrocatalysts were prepared from Ru electrochemical or spontaneous deposition on commercial-grade carbon-supported Pt nanoparticles (Pt-Vulcan XC72, E-TEK). The resulting Ru coverage was estimated by cyclic voltammetry in supporting electrolyte. The maximum electrocatalytic activity for methanol oxidation at room temperature was observed at lower Ru coverage for spontaneous deposition than for electrodeposition; _Ru 10% vs 20%, respectively. On the other hand, higher current densities for methanol oxidation were obtained in the case of electrodeposited Ru. These two results were related to the presence of non-reducible ruthenium oxides in the spontaneous deposit. The present work provides evidence that (i) efficient DMFC electrocatalysts can be achieved by Ru deposition on Pt nanoparticles, and (ii) formation of a PtRu alloy is not a required condition for effective methanol electrooxidation.     

Microstructure and thermal cycling behavior of thermal barrier coating on near-α titanium alloy

Two kinds of thermal barrier coatings (TBCs), consisting of NiCoCrAlY bond coats (BCs) deposited by electron beam-physical vapor deposition (EB-PVD) and high velocity oxy-fuel (HVOF) thermal spraying, respectively, and top 8 wt%Y₂O₃–ZrO₂ (8YSZ) ceramic layers deposited by EB-PVD were prepared on near-α titanium alloys. The field emission scanning electronic microscopy and microhardness indentation are used to study the microstructure and microhardness. Different failure features including cracking patterns and the delamination degree of these two TBCs are discussed according to the thermal cycling tests in the atmosphere. It is found that the morphology of the two BCs deposited by different methods (EB-PVD and HVOF) determines the microstructure and microhardness of their corresponding top 8YSZ layers. The BC prepared by EB-PVD is dense and homogeneous, which leads to a dense and hard 8YSZ with clustered slim columnar grains. The BC prepared by HVOF, however, is porous and inhomogeneous in microstructure and, as a result, the top ceramic layer is loose with low microhardness and clustered coarse columnar grains.     

Mechanism of carbon nanotube growth from camphor and camphor analogs by chemical vapor deposition

Single walled nanotubes have been synthesized by chemical vapor deposition from camphor, camphor analogs (camphorquinone, norcamphor, norbornane, camphene, fenchone), and various other precursors (menthone, 2-decanone, benzene, methane). The high temperature conditions (865 °C) and Fe/Mo alumina catalyst used in the syntheses are archetypal conditions for the production of single walled carbon nanotubes. It has been shown that the mechanism of tube growth is unlikely to depend upon the production of reactive five- and six-member rings, as has been previously suggested. The results suggest that the presence of oxygen in the precursor does not significantly improve the quality of tubes by etching amorphous carbon: it is suggested that the control of the flux of the precursor to the catalyst is more important in the production of high quality tubes. There is, however, evidence for different distributions of tube diameter being produced from different precursors.     

双面彩色相纸分切中的静电预防

静电无处不在。双面彩色相纸由于采用聚丙烯作为基材,和单面相纸相比在分切中更容易产生静电。严重的静电斑会造成产品报废。在环境湿度、设备接地、分切速度和静电消除器安装这四个方面,采取相应的措施可有效的控制分切过程中静电的产生,保障相纸的表观质量。