Distortion Engineering - Identification of Causes for Dimensional and Form Deviations of Bearing Rings

Distortion of power transmission parts after heat treatment is influenced by each step of the process chain, ranging from material production to hard-machining. However, an experimental analysis for each production step in the manufacture of bearing rings has shown that distortion is significantly influenced by turning before heat treatment. Elastic ring deformation caused by fixing the workpiece in the chuck leads to a variation of the depth of cut and polygonal form deviations occur after machining. In addition the cutting process induces locally varying residual stresses which also contribute to dimensional and form deviations of machined rings. In this paper results from experimental investigations of the principle physical causes for the distortion of bearing rings are presented and discussed. Finally, strategies for the minimization of distortion are derived.     

Pro/E工程剖视图与制图国标不相符合问题的解决方法

利用Pro/E三维模型与二维图形双向关联功能可以快速生成工程图,但由于在视图表达上有些方面不符合我国制图标准而影响其有效使用.本文针对Pro/E制作工程剖视图时所存在的与制图国标不相符合的问题,提出了解决这些问题的方法和技巧.     

燃烧固硫反应的动力学和热力学及其影响固硫产物分解因素的研究

煤在高温条件下燃烧不利于固硫反应，并从热力学角度出发，得出了煤燃烧中钙基固硫剂反应自由能与温度的关系函数，由化学反应动力学得出院 硫酸钙分解反应的动力学方程及其相关参数，在还原性气氛中，从理论和实验上都证明了硫酸钙在较低温下会发生二次分解，理论分解温度与实际分解温度非常吻合，煤灰中氧化钙和三氧化二铝的存在，可以提高硫酸钙的分解温度同阳也给出了钙基固硫剂的应用条件。     

烯（醚）醛一步法合成异戊二烯技术开发—基础理论研究进展

本文介绍了烯(醚)醛一步法合成异戊二烯技术开发中,基础理论研究工作的进展,其中包括化学热力学、化学动力学、再生烧炭本征动力学和扩散动力学等理论研究。并针对该反应特征进行了化学反应规律和流动传递规律的研究。建立了流化床反应器数模和流化床再生器数模,为工程技术开发提供理论依据。     

(CO2 + 2‐propanol) mixture as a foaming agent for polystyrene: A simple thermodynamic model for the high pressure VLE‐phase diagrams taking into account the foam vitrification

The equation of state model developed by Lacombe and Sanchez (J Phys Chem 1976, 80, 2352) is used in the form proposed later by Sanchez and Stone (Polymer Blends, Vol. 1: Formulation, 2000; Chapter 2) to correlate experimental vapor‐liquid equilibrium (VLE) data for the three binaries and the ternary systems. Experimental data from the binary systems carbon dioxide‐isopropyl alcohol (CO₂‐IPrOH), isopropyl alcohol‐polystyrene (IPrOH‐PS), and carbon dioxide‐polystyrene (CO₂‐PS) are used to calculate VLE properties for the ternary system CO₂‐IPrOH‐PS. Two‐dimensional VLE‐phase diagrams were calculated and used to describe from a thermodynamic point of view the pressure, volume, and temperature values that characterize a thermoplastic foam evolution process, from the extruder to the foaming die. For different initial mixture CO₂ + IPrOH concentrations, pressure reduction produces liquid foaming until the vitrification curve arrests the final foam volume expansion. The dependence of the vitreous transition with the system CO₂ + IPrOH concentration while foaming is represented by the Chow (Macromolecules 1980, 13, 362) equation. The calculation procedure is proposed as a design tool to reduce the amount of experimental data usually needed as a requirement previous to the design stage. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2663–2671, 2007     

Non-isothermal reaction-diffusion systems with thermodynamically coupled heat and mass transfer

Non-isothermal reaction-diffusion (RD) systems control the behavior of many transport and rate processes in physical, chemical, and biological systems. A considerable work has been published on mathematically coupled nonlinear differential equations of RD systems by neglecting the possible thermodynamic couplings among heat and mass fluxes, and reaction velocities. Here, the thermodynamic coupling refers that a flux occurs without its primary thermodynamic driving force, which may be gradient of temperature, or chemical potential, or reaction affinity. This study presents the modeling equations of non-isothermal RD systems with coupled heat and mass fluxes excluding the coupling of chemical reactions using the linear non-equilibrium thermodynamic approach. For a slab catalyst pellet, it shows the dynamic behavior of composition and temperature profiles obtained from the numerical solutions of non-linear partial differential equations by Mathematica for two industrial reaction systems of synthesis of vinyl chloride and dissociation of N₂O.     

A method for transformation of engineering bill of materials to maintenance bill of materials

In order to solve the transformation problem of Bill of Materials (BOM) from engineering BOM to maintenance BOM for Maintenance, Repair and Overhaul (MRO) systems, a formal transformation model of BOM view is proposed. In this model, the intermediate component, inherited component, virtual component are defined in the specific maintenance management domain, and the transformation process from engineering BOM to maintenance BOM is discussed through feature recognition methods and rules. The proposed transformation model has been developed and deployed in an MRO system for a steel manufacturing enterprise.     

骨组织工程支架材料

寻找理想的支架材料是目前骨组织工程研究的热点。本文对用于骨组织工程支架材抖的天然生物衍生材料、聚合物类材料、陶瓷材料及其复合材料等的研究现状进行综述，分析了这些材料的优缺点，并对骨组织工程支架材料发展趋势进行了展望。     

Co-Mo-K催化剂上COS、HCN转化率的热力学分析

利用热力学基础数据和相关软件对Co-Mo-K催化剂上COS、HCN加氢和水解反应进行了热力学计算。在热力学上,COS、HCN加氢和水解反应在耐硫变换条件下均为自发过程。计算结果表明在Co-Mo-K耐硫变换条件下COS、HCN主要发生的是水解反应,该结果与工业经验数据基本一致,可以作为工业实际借鉴。     

磷渣制备高C3S熟料的烧成机理研究

利用ICP、DTA、XRD、SEM和EDXA测试方法,研究了磷渣在制备高C3_S熟料过程中的作用机理。研究结果表明,磷渣对高C_3S熟料烧成的促进作用主要是由于磷渣中CaSiO_3的“晶核作用”。