Identification of Chaos Representations of Elastic Properties of Random Media Using Experimental Vibration Tests

This paper deals with the experimental identification of the probabilistic representation of a random field modelling the Young modulus of a nonhomogeneous isotropic elastic medium by experimental vibration tests. Experimental data are constituted of frequency response functions on a given frequency band and for a set of observed degrees of freedom on the boundary of specimens. The random field representation is based on the polynomial chaos decomposition. The coefficients of the polynomial chaos are identified setting an inverse problem and then in solving an optimization problem related to the maximum likelihood principle.     

基于模糊信息处理的中板轧机微机在线监测系统

中板轧机是中板厂最重要的生产设备，对其工况进行在线监测意义重大，各种传感器将轧机的工况信息传送给微机系统，微机系统将这些信息进行模糊处理，发出相关信息，指导系统安全，高效运行。     

考虑介质变形和长期导流能力的裂缝性气藏压裂产能模拟研究

在气藏开采过程中，由于孔隙压力的不断降低，使得介质变形而导致渗透率的变化，进而影响井的产量。针对这一问题，提出了各种流体与固体耦合的数值模拟模型。然而，对于裂缝性储层和多相渗流问题，流固耦合模型中许多参数不易获取，且求解难度很大，使得耦合模型存在一定的应用局限性。很少有文献在气井产能模拟时将介质变形和就地的长期导流能力加以综合考虑。文章考虑介质变形引起的天然裂缝渗透率的变化和裂缝导流能力随时间递减的影响，建立了裂缝性气藏压裂后气水两相渗流数学模型，推导出了数值计算模型；本模型易于编程求解，对于研究裂缝性气藏的渗流特征，特别是进行单井压后产能预测具有一定的实用意义。计算表明：不考虑介质变形和导流能力递减所预测的气产量偏高；目前普遍使用的气藏数值模拟软件中，假定渗透率、裂缝导流能力为常数，以致模拟计算结果比实际偏高。     

钌基厚膜电阻传导模型初探

介绍钌基厚膜电阻的三种传导模型。三种模型都可以得到较满意的R—V曲线，不足处是链模型得出电阻率和导电相粒子形状及尺寸的关系和实验事实不符；有效介质模型不能反映厚膜电阻形成过程中众多因素的影响；渗透模型很多参数的获得有赖经验公式。渗透模型能反映烧结过程中更多因素的影响，并可解释方阻与导电相粒度及峰值温度的变化关系。     

FLOW OF NEWTONIAN FLUIDS THROUGH SINUSOID ALLY CONSTRICTED TUBES. NUMERICAL AND EXPERIMENTAL RESULTS

Numerical and experimental predictions of pressure drops in the flow of Newtonian fluids through sinusoidally constricted tubes (SCT) are carried out. The numerical evaluations analyzed in this work are obtained from the following methods: Geometric Iteration (GJM), Geometric Iteration with First and Second Upwinds (GIM1, GIM2), Successive Over Relaxation by Line (SORBLM), Global Galerkin Spectral Method (GGSM), Collocation (CM) and Dufort-Frankel (DFM). The GIM1, GIM2 and SORBLM are applied to SCT and explained in this work. The other methods have been previously reported in the literature with the same purpose. Experiments are accomplished for constrictions of approximately 40,60 and 80% of the average tube diameter and results compare well with numerical predictions of the steady flow. It is concluded that special attention should be given to evaluations of the friction factor ƒ for Reynolds numbers Re between the onsets of flow separation and turbulence due to flow instability. Finally, the SCT as a model for porous media (PM) is discussed.     

Finite Element Analysis of a Moving Boundary Value Problem

A finite element formulation and the solution of a set of nonlinear coupled heat and mass transfer equations for a two-phase system with a moving evaporation interface is presented. The interface condition takes into account the moisture transfer balance at the moving boundary. The finite element results were compared with existing results for a single phase system for model validation. In the two-phase system, the movement of evaporation front has an appreciable effect on the temperature and moisture distribution inside the porous medium during drying. The effect of the nondimensional heat of vapourization parameter γ on the evaporation front, temperature and moisture distribution in porous medium was studied. The higher the value of γ, the slower is the movement of the evaporation front. The temperature decreased and the moisture content increased as the nondimensional vapourization parameter γ increased. This model has potential applications in studying the heat and mass transfer characteristics in food and biomaterials.     

二维金属凹槽填充各向异性介质时散射的边界元方法:TE情形

由各向异性介质无界空间Green函数和Green恒等式出发，推导了TE波入射时二维任意截面金属凹槽填充各向异性介质时所满足的边界积分方程，并用边界元法和广义网络原理计算了金属凹槽填充各向异性介质时的散射。用文中方法退化计算了凹槽填充各向同性介质时的散射，计算结果与解析结果一致。并给出了凹槽填充各向异性介质时的散射算例。     

热等静压技术的发展及应用

在介绍热等静压技术和设备发展的基础上，对其在提高铸件质量以及拓展高速钢、双炼钢和超级双炼钢、高性能陶瓷等新型材料应用领域方面的作用，进行了较全面的阐述。并预计，因热等静压技术所具有的优势，在今后几年其应用增长可达到每年递增15％-20％的水平，且随着其在铝加工工艺中应用的拓展，年增长率可望达到25％。     

波在PTL介质中传播的旅行时反演

本文对Byun(1990)的横向各向同性介质的旅行时反演方法作了两点改进:其一是根据优化后的V_r值计算一个初始的F值,然后再根据这个初始值进行最小均方误差分析;其二是对初始值进行优化分析时,提出用测量值(或由式(4)和式(10)计算的理论值)作为实际值进行拟合,而Byun的方法是用式(11)的计算来得到一个实际值。理论模型证明:本文所述方法有一个比较宽的适应性,而Byun方法只在弱各向异性时才可以得到较精确的结果。     

传播介质特性对爆破震动信号分析中小波包时频特征的影响

传播介质是指爆破震动赖以向外传播的地层介质 ,其基本特征是影响爆破震动时频分布的主要因素之一。当传播介质中有爆破震动通过时 ,其动态响应将会因其原地结构的不同而在响应持续时间、频谱、响应的衰减等特征方面均有较大差异。本文利用岩体 (岩土混合体 )基本质量指标BQ值以及完整性系数Kv 来量化传播介质特性。通过对不同岩层地质条件下产生的爆破震动进行小波包分析 ,探讨了传播介质特性量化参数与爆破震动时频分布之间的关系。研究中发现 ,传播介质特性对单段波形小波包细节信号的主振频带分布、峰值质点振速及衰减阻尼比等时频特征参数均有较大影响 ,其中主振频带分布范围随着传播介质的完整性系数Kv 值减小而增大 ,优势频率值随完整性系数Kv 值减小而增加 ,而峰值质点振速及衰减阻尼比与完整性系数Kv 值之间的规律性不强