上马水库地裂缝成因及工程处理措施探讨

文中着重阐述了上马水库库坝区的地裂缝产生的原因及发育规律,分析了地裂缝对水库的直接危害,为水库除险加固设计提供了指导,并提出了切实可行的工程处理措施建议。     

Application of stochastic filtering for lifetime prediction

This paper introduces a stochastic filtering modeling approach for predicting the remaining lifetime of a component based on information on the stochastic degradation process and uncertain condition monitoring measurements. The model is illustrated by a case study, where the degradation is assumed to be a simplified fatigue crack growth process. The model accounts for uncertainties in both degradation process and condition measurements in a sound way. If completed with information on costs of monitoring, failure and replacement, such model could be used in optimizing both the condition monitoring intervals and, e.g. the replacement time for the component.     

Prediction of fatigue behaviour in stress-concentrators of arbitrary geometry

A new method is outlined which aims to predict high-cycle fatigue behavior of components which fail from stress-concentrators. This involves examination of the stress field in the vicinity of the stress-concentrator, and comparison with stress fields for cracks at known stress intensities. Methods which are currently used for simple notch geometries can thus be generalised, making the approach applicable to stress concentrators of any geometry. The method of prediction is shown to be stable, providing a solution of good accuracy when compared to analytical methods for standard specimen geometries. Favourable comparisons with experimental data have been achieved both for standard notches and for a corner geometry which represents a typical component case.     

高速公路水毁成因及防治措施

从高速公路水泥混凝土路面裂缝，挖方地段护面墙开裂、拦水带与路面衔接部位裂缝，急流槽水泥砂浆勾缝脱落等方面分析了高速公路水毁的成因，并提出了切实可行的防治措施，保证了高速公路的正常运营。     

Fracture mechanics global approach concepts applied to creep slow crack growth in a medium density polyethylene (MDPE)

Creep fracture by slow crack growth is studied in a medium density polyethylene at 60 °C and 80 °C. Whereas elastic-plastic fracture mechanics load parameters fail to provide a unique temperature-independent correlation, that of the fracture mechanics for creeping solids C^∗ is proved to be relevant since this parameter correlates very well with the time to failure. Correlation established on both full notched creep tensile and double edge notched tensile tests was validated on cracked gas-pipe samples tested under hydrostatic pressure, extending the use of time to failure versus C^∗ diagram to predict lifetime of engineering components.     

Cyclic X-Y mechanical tests: A new method to perform in situ reversed-deformation experiments in the high-voltage electron microscope

There has been, in the past, only limited success with in situ cyclic or reversed plastic deformation tests in the transmission electron microscope (TEM). This is probably partly due to problems associated with buckling of the foil when an applied tensile or shear stress is reversed. Mechanical analysis shows that dislocation movement can be reversed by tensile stressing in alternating perpendicular directions (i.e., 90° rotations of a tensile stress); thus buckling of the foil can be avoided. A design for performing such X-Y in situ TEM tests is presented, with observations that demonstrate its feasibility.     

钢筋混凝土防撞护栏早期裂缝成因分析及预防

从设计方面、施工方面及混凝土原材料的质量及配合比设计三方面分析了钢筋混凝土防撞护栏表面早期裂缝出现的成因,并提出了相应的预防措施,以有效防止护栏表面裂缝的产生。     

探地雷达在莲花电站二坝坝顶路面裂缝探测中的应用

介绍探地雷达探测方法,探讨使用高频探地雷达探测粘土心墙堆石坝坝顶混凝土路面裂缝,达到快速、无损查明坝顶混凝土裂缝的性质与成因的目的.     

带钢窄边线状裂纹缺陷的形成原因及预防措施

本文通过对带钢窄边线状裂纹缺陷的金相显微组织观察和扫描电镜与能谱分析，确定了带钢窄边线状裂纹缺陷的形成原因，并针对原因提出了相应的预防措施，有效地控制了带钢窄边线状裂纹缺陷的重复发生。