环氧树脂流变学的研究进展

综述了近20年来环氧树脂流变学的研究进展。利用流变学来指导环氧树脂的最新应用,包括环氧树脂电子浆料例如底部填充胶（underfill）,环氧树脂基复合材料,环氧树脂涂料,环氧树脂黏合剂,环氧树脂与其他树脂/橡胶的复合体系等。环氧树脂体系中的填料规格、加入量以及环氧树脂的固化过程与黏度等流变指数息息相关。随着芯片等领域技术的快速发展,流变学在环氧树脂中的应用还会得到进一步加强。     

Nickel-Carnosine complex:A new carrier for enzymes immobilization by affinity adsorption

Immobilization is an effective method to promote the application of enzyme industry for improving the stability and realizing recovery of enzyme.To some extent,the performance of immobilized enzyme depends on the choice of carrier material.Therefore,the development of new carrier materials has been one of the key issues concerned by enzyme immobilization researchers.In this work,a novel organic-inorganic hybrid material,nickel-carnosine complex (NiCar),was synthesized for the first time by solvothermal method.The obtained NiCar exhibits spherical morphology,hierarchical porosity and abun-dant unsaturated coordination nickel ions,which provide excellent anchoring sites for the immobiliza-tion of proteins.His-tagged organophosphate-degrading enzyme (OpdA) and ω-transaminase (ω-TA)were used as model enzymes to evaluate the performance of NiCar as a carrier.By a simple adsorption process,the enzyme molecules can be fixed on the particles of NiCar,and the stability and reusability are significantly improved.The analysis of protein adsorption on NiCar verified that the affinity adsorp-tion between the imidazole functional group on the protein and the unsaturated coordination nickel ions on NiCar was the main force in the immobilization process,which provided an idea way for the develop-ment of new enzyme immobilization carriers.     

 基于混合模型的优化低频低压减载方法研究

文中以低频低压情况下保证电压稳定的前提下减载为研究内容,提出了一种基于混合模型的优化低频低压减载方法。该混合模型将遗传算法与人工神经网络相结合,在保证电压稳定的情况下选择合适的节点进行负荷切除。实验结果表明,该方法可以在低频低压情况下使负荷减载量达到最小。     

关注区可变的实时仿真方法与平台

交直流混合电网的实时仿真既要考虑电力电子设备的开关特性,又要保证适应较大的电网规模,在实际工程中面临诸多困难.给子网络赋予动态可变的关注标志,对关注子网络采用存储压力小的节点消去法,对非关注子网络采用计算量少的线性组合法,从而保证骨架型节点电压法的实用性.在Xilinx公司的Virtex-7 FPGA VC709开发板中,采用无缝的并行化仿真计算程序对接方式和灵活的结构参数查询方法解决了现场可编程逻辑门阵列资源的紧缺问题,设计了一种关注区可变的实时数字仿真平台.以典型的交直流混合电网为例,仿真验证了所提方法的可行性与所研发平台的有效性.     

微电网跟踪调度计划双层双时间尺度实时控制策略

为了提升微电网跟踪调度计划的能力,并降低分布式电源和负荷的功率波动对跟踪效果的影响,提出一种利用由超级电容和电池储能组成的混合储能系统跟踪调度计划的双层双时间尺度实时控制策略。上层基于模型预测控制方法建立日内滚动优化模型,结合分布式电源和负荷的超短期功率预测结果,综合考虑一段时域内的跟踪偏差及混合储能系统的功率和荷电状态对跟踪调度计划进行滚动优化;下层在上层优化结果的基础上,采用基于荷电状态的混合储能系统实时控制策略对超级电容和电池储能的实时功率进行协调分配,进一步降低分布式电源和负荷的实时功率波动对跟踪效果的影响。通过仿真算例对所提控制策略进行验证,结果表明:所提策略不但实现了良好的实时跟踪调度计划的控制效果,而且优化了超级电容和电池储能的荷电状态。     

Processing of yttria partially stabilized zirconia thermal barrier coatings implementing a high-power laser diode

Several studies have been undertaken recently to adapt yttria partially stabilized zirconia (YPSZ) thermal barrier coating (TBC) characteristics during their manufacturing process. Thermal spraying implementing laser irradiation appears to be a possibility for modifying the coating morphology. This study aims to present the results of in situ (i.e., simultaneous treatment) and a posteriori (i.e., post-treatment) laser treatments implementing a high-power laser diode. In both cases, the coatings underwent atmospheric plasma spraying (APS). Laser irradiation was achieved using a 3 kW, average-power laser diode exhibiting an 848 nm wavelength. Experiments were performed to reach two goals. First, laser post-treatments aimed at building a map of the laser-processing parameter effects on the coating microstructure to estimate the laser-processing parameters, which seem to be suited to the change into in situ coating remelting. Second, in situ coating remelting aimed at quantifying the involved phenomena. In that case, the coating was treated layer by layer as it was manufactured. The input energy effect was studied by varying the scanning velocity (i.e., between 35 and 60 m/min), and consequently the irradiation time (i.e., between 1.8 and 3.1 ms, respectively). Experiments showed that coating thermal conductivity was lowered by more than 20% and that coating resistance to isothermal shocks was increased very significantly.     

液压机本体柔性化设计相关技术的研究

针对液压机本体设计特点，在液压机本体CAD应用系统的开发中，引入了柔性化设计的概念，以Pro／E为建模后台、VB6．0为操作语言，研究了柔性化设计的相关技术，并提出了相关解决方案，并为以：Pro／E为后台的应用系统的开发提供了一种可行方案。     

聚氨酯-聚丙烯酸酯复合乳液的动态力学性能

采用种子乳液聚合法合成了聚氨酯一聚丙烯酸乙（丁）酯[PU／PE（B）A]复合乳液。并研究了不同组成对复合乳液性质、相客性、阻尼性能及拉伸性能的影响。耐水性及稳定性测试表明，随PE（B）A含量的增加，涂膜的耐水性变好，而乳液的稳定性变差。动态力学性能测试（DMS）表明，合成的PU／PE（B）A复合乳液为半相容体系，其相容性随PE（B）A含量的增加而增强。DMS和拉伸试验表明PU／PEA／P（B）A（质量比50／25／25）复合乳液具有优良的阻尼性能、抗拉强度和断裂伸长率，可用作宽温域阻尼涂料。     

Hydrogen sorption sites in the gallium containing hybrid catalysts used for the aromatization of light alkanes

Gallium species which were incorporated initially in the oxide form, were all in the (+3) oxidation state in the hybrid catalyst and exhibited two types of hydrogen chemisorption sites, s_hw and s_hs. The stronger sorption sites shs which predominated at higher gallium dispersion, corresponded probably to the most effective surface configuration for gallium in the aromatization ofn-butane.     

壳聚糖/磷钙杂化膜的制备与性能研究

将壳聚糖/钙盐复合膜浸泡在磷酸二氢钾溶液中制备了壳聚糖/磷钙杂化膜.用电子扫描电镜观察杂化膜和膜内磷钙微粒的形貌,研究了杂化膜的力学性能、溶胀率、吸光度及热稳定性.结果表明,杂化膜内磷钙晶体为柱状和层状结构,磷钙被包裹在杂化膜内,并与壳聚糖膜形成紧密的连续结构.随着膜中磷钙的质量分数从2.1%增加到8.0%,膜的溶胀率从102%增加到144%,其在200～800 nm波长范围的吸光度也逐渐增加.当磷钙的质量分数为7.0%时,杂化膜的力学性能最佳,其拉伸强度为54.42 MPa、弹性模量为4045.72 MPa、断裂伸长率为4.85%.杂化膜的热分解温度为299℃,高于壳聚糖膜的分解温度290℃.这种具有层状磷钙结构的杂化膜具有良好的生物相容性,可作为一种潜在的支架材料.