Numerical characterization of a microscale solid-oxide fuel cell

In this study, a single unit of planar micro-solid-oxide fuel cell (μSOFC) is investigated numerically to evaluate the influences of flow channel design, oxygen composition, and thermal operating conditions on cell performance. Four flow channel designs are examined under the co-flow configuration: serpentine, double serpentine, rod bundle, and oblique rib. For all designs, the contacts areas of interconnect to electrodes are kept consistent to maintain the ohmic losses at the same level. To characterize the mass transport effects, there are three different compositions, 100% O₂, 50% O₂/50% N₂ and air, fed to the cathode inlet. Different thermal conditions, adiabatic and isothermal, are applied to the outer boundary of the μSOFC and the results are compared. The outcomes suggest that both thermal conditions and oxidant composition show remarkable influences on μSOFC performance. Under adiabatic conditions, the rise of cell temperature causes a decrease in reversible voltage, deteriorating the overall cell competence. When oxygen is diluted with nitrogen, local gas diffusion becomes dominant to the cathode reaction. Bulk flow, on the other hand, plays a minor role in cell performance since there is little deviation in the polarization curves for all flow channel designs, even at high current densities. For comparison, the flow visualization technique is employed to observe the transport phenomena in various flow channel designs. The flow patterns are found to resemble the concentration distribution, providing a useful tool to design μSOFCs.     

码分体制多站交会测量中的电平效应分析

本文对测量站外测的码分多址，多站共作应答机测距方式中的远近电平效应问题，结合靶场的实际使用情况进行了具体分析。     

组合式光纤流量传感器

提出了一种新型的组合式光纤流量传感器，介绍了它的工作原理，详细讨论了光脉冲转换器的设计要点，据此设计了传感头，并给出了它的实验结果。     

瞬态光的光电摄谱测量

“光电摄谱法”是一种辐射光谱计量参数的测量方法,此法解决了单次脉冲闪光灯辐射光谱相对能量分布的精确测量问题。本文介绍了这种方法的测量原理、方法和特点,同时阐述了对接收器件、光路系统和时控电器系统的要求,并以自行研制的闪光光谱测定仪为例,对其计量参数波长和相对能量的标定与校正给予了必要的讨论,最后以实测结果证实了该方法的可靠性。     

中和室脉冲进气的蒙特卡罗模拟及实验验证

对于中和室内的脉冲气体，用蒙特卡罗方法模拟了气体压力沿轴向的分布。并用模拟进气系统和气压瞬时测量系统，对模拟结果进行了验证。得到与模拟结果较为一致的曲线，从而为注入器真空系统的设计提供了可靠的依据。并通过实验结果，给出了气体靶厚的建立时间约为６０ｍｓ。     

Pollutant dispersion over two-dimensional hilly terrain

Numerical prediction of the wind flow and pollutant dispersion over two-dimensional hilly terrain is presented. The wind tunnel experiments are conducted to validate the numerical results of the flow field. Measured mean velocity profiles, turbulence characteristics, and surface pressure distributions show good agreement with the numerical predictions. The hypothesis of Reynolds number independency for an atmospheric boundary layer flow over aerodynamically rough terrain is numerically confirmed. The linear theory provides generally good prediction of speed-up characteristics for gently sloped low hills. The effect of two-dimensional double hills on the dispersion of pollutants from continuously or temporally released line source of different emission heights and locations is also investigated. The ground-level concentrations are considerably reduced as emission heights are increased. The variances of ground-level concentration with respect to time from a temporally released source are strongly influenced by the flow separation.     

基于锁相同步检测的数字化阻抗测试方法

介绍了一种数字化阻抗测试方法，它采用锁相同步采样、数字化矢量电压电流比法及校准技术测试元器件或线路阻抗。同时介绍了相应实验电路原理，并结合线路接口，进行了通信电缆的线路阻抗测试实验。     

单嘴精炼装置真空室内卷渣水模型研究

本文针对长城特殊厂单嘴精炼装置进行了真空室内加渣精炼的卷渣水模型研究。在试验的基础上，首先讨论了真空室内卷渣现象的工艺过程，然后进一步得出了临界吹气量的表达式。研究结果为工业性生产进一步提高钢的质量打下了基础。     

SCLC法测量非晶硅有效隙态密度

提出了用空间电荷限制电流（SCLC）法测量非晶硅材料的有效隙态密度的新方法，并且报告了用4061A型半导体综合测试仪测量有效隙态密度的结果。测量结果发现与用低频电容法所得结果相符。