Receptance coupling for end mills

Identification of chatter free cutting conditions, the chatter stability lobes, requires a measurement of the frequency response function (FRF) of each tool mounted on the spindle. This paper presents a method of assembling known dynamics of the spindle–tool holder with an analytically modeled end mill using the receptance coupling technique. The classical receptance technique is enhanced by proposing a method of identifying the end mill–spindle/tool holder joint dynamics, which include both translational and rotational degrees of freedom. The method requires measurement of FRFs with impact tests applied on the spindle–tool holder assembly and blank calibration cylinders attached to the spindle. The spindle and tool holder characteristics are completely identified from the two experiments, and used for the mathematical prediction of FRF for end mills with arbitrary dimensions. The proposed method is experimentally proven and verified in cutting tests.     

30MnCrNiMoB低合金钢绝热剪切带的形成机制与微结构

研究了３０ＭｎＣｒＮｉＭｏＢ低合金钢在穿甲弹冲击下绝热剪切带（ＡＳＢ）的形成机制。指出在高速变形（冲击）条件下ＡＳＢ的形成是应变硬化、热软化和位错动态发时导致的应变软化等因素相互耦合产生的塑性失稳现象。进一步确认ＡＳＢ内具有周期性微观结构，并说明ＡＳＢ中周期性开裂与微结构的关系。     

铸造厂感应电炉的选型

阐述中频电炉在铸造厂的应用，讨论感应电炉选型时需要考虑的因素，电炉容量和功率大小与工艺需求的关系，电源类型，电源与电炉的配置等与工艺需求的关系。对感应电炉选型时容易混淆的电炉熔化率与生产率的关系，展开讨论，引入功率利用系数的概念。     

数字化射线检测中缺陷影像的频域处理

研究频域处理在数字化射线检测缺陷影像增强处理过程中的应用.采用Matlab 7实现高通滤波处理流程,对处理结果进行分析,证实频域处理可有效改善数字化射线检测的灵敏度、提高图像分辨率.将其用于各类典型缺陷的数字化射线检测影像处理,可提高缺陷的检出率.     

Detection of delamination in laminated composites with limited measurements combining PCA and dynamic QPSO

This paper presents an output only damage diagnostic algorithm based on frequency response functions and the principal components for health monitoring of laminated composite structures. The principal components evaluated from frequency response data, are employed as dynamical invariants to handle the effects of operational/environmental variability on the dynamic response of the structure. Finite element models of a laminated composite beam and plate are used to generate vibration data for healthy and damaged structures. Three numerical examples include a laminated composite beam, cantilever plate made of carbon–epoxy and a laminated composite simply supported plate. Varied levels of delamination of laminated composite plies and matrix cracking at varied locations in the plies are simulated at different spatial locations of the structure. Numerical investigations have been carried out to identify the spatial location of damage using the proposed principal component analysis (PCA) based algorithm. In order to limit the number of sensors on the structure, an optimal sensor placement algorithm based on PCA is employed in the present work and the effectiveness of the proposed algorithm with a limited number of sensors is also investigated. Finally, the inverse problem associated with the detection of delamination and matrix cracking is formulated as an optimization problem and is solved using the newly developed dynamic quantum particle swarm optimization (DQPSO) algorithm. Studies carried out and presented in this paper clearly indicate that the proposed SHM scheme can robustly identify the instant of damage, spatial location, the extent of delamination and matrix cracking even with limited sensor measurements and also with noisy data.     

改进的软件错误报告自动分类算法

软件错误报告的自动分类能够节省大量人力和时间,然而用户提交的错误报告主观性较强,对错误报告的描述较随意,造成自动分类的效率低下。为此,基于传统的词频-逆向文件频率( TF-IDF )算法,结合文档内词条频度与词条在同类别及不同类别文档中的分布情况,提出2种特征降维的改进算法,降维后再对词条进行权值处理,进一步提高特征降维的效果。实验结果表明,应用该算法得到的错误报告自动分类在精确率、召回率、F1值和准确度等指标上比现有算法都有明显提高。     

步进电机控制系统的设计

系统由单片机产生数字脉冲信号,通过ULN2003驱动芯片控制电机的运行。由于脉冲信号的频率决定电机的转动速度,所以要改变转速就需要改变脉冲频率。系统采用定时中断的方法改变脉冲频率,而按键次数主要控制外部中断用以改变存储区中的速度值,步进电机的输出脉冲频率就发生相应的改变,最终达到改变转速的效果。     

Design of a printed log‐periodic dipole array antenna with high gain for millimeter‐wave applications

In this article, a V‐band printed log‐periodic dipole array (PLPDA) antenna with high gain is proposed. The antenna prototype is designed, simulated, fabricated, and tested. Simulation results show that this antenna can operate from 42 to 82 GHz with a fractional impedance bandwidth of 64.5% covering the whole V‐band (50–75 GHz). The antenna has a measured impedance matching bandwidth that starts from 42 to beyond 65 GHz with good agreement between the experimental and simulated results. At 50 and 65 GHz, the antenna has a measured gain of 10.45 and 10.28 dBi, respectively, with a gain variation of 2.6 dBi across the measured frequency range. The antenna prototype exhibits also stable radiation patterns over the operating band. It achieves side‐lobe suppression better than 17.26 dB in the H‐plane and better than 8.95 dB in the E‐plane, respectively. In addition, the cross‐polarization component is 18.5 dB lower than the copolarization with front‐to‐back ratio lower than 24.1 dB in both E‐ and H‐planes across the desired frequency range. Based on a comparison of performance among the reported work in the literature, we can say that the proposed PLPDA antenna is a proper candidate to be used in many applications at V‐band frequency. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:185–193, 2015.     

GNSS工程控制网坐标系挂靠问题探讨

分析了工程测绘中出现投影变形的原因及消除投影变形的常用方法。论述了挂靠坐标系的建立方法和应用条件,挂靠坐标系既能有效抵偿基线投影变形,又能解决两种坐标系统的衔接问题,为控制网计算、地形图测绘、工程图与万分图拼接、施工测绘提供了极大的便利。