基于ENC424J600的以太网与串行接口转换技术

论述了在STM32系列的MCU上移植TCP/IP协议栈LwIP,并利用新型以太网控制器ENC424J600实现网络数据传输功能。该系统主要完成的功能是接收上位机发送的数据,并将这些数据转换成通用串行接口输出。ENC424J600是Microchip新推出的一款以太网控制器,其速度优于ENC28J60,同时为用户提供两种接口模式。本文介绍了其基于SPI接口模式下的实现过程,详细描述了该网卡驱动的硬件电路和软件流程。     

基于uIP与AJAX的动态Web服务器设计

针对远程信息监测系统中数据的实时采集更新问题,将AJAX和CGI应用到嵌入式Web服务器的设计中,实现了服务器与浏览器之间的动态信息交互。本文首先分析了uIP协议栈,并在协议栈之上设计了Web服务器,然后利用CGI服务程序处理来自客户端的XMLHttpRequest对象请求,实现动态Web功能。现场实验结果表明,嵌入式Web服务器降低了服务器端的资源开销,提高了响应速度。     

An enhanced,acoustic emission-based,single-fiber-composite test

In the single-fiber-composite (SFC) test, a fiber imbedded in a matrix is loaded in tension, resulting in a fragmentation of the fiber. In the conventional version of this test, the final fiber fragmentation length distribution is used with a micro-mechanical model to determine the average fiber/matrix interfacial shear stress. In the enhanced version of this test, one also determines the applied stress at each fiber fracture, and from this, one can evaluate the strength of the fiber at short gage lengths. In our measurement system, we utilize an acoustic emission (AE) technique to detect the fiber fractures and to locate the fiber breaks and so determine both the fiber failure stresses as well as the fiber fragmentation lengths while the test is in progress. Critical to the success of this test is a broadband AE system that utilizes point-like AE sensors, procedures for evaluatingin situ, the wavespeed of the first wave arrival and signal processing techniques for determining the arrival time of this signal as precisely as possible for a broad range of wave shapes. Here we describe the application of such an enhanced SFC test procedure to investigate the failure of a Nicalon fiber in an epoxy matrix.     

QUICK: a tool for graphical user-interface construction by non-programmers

The last decade has placed the superiority of graphical user interfaces over traditional text-based approaches beyond dispute. In almost all contexts, users have found graphical interfaces easier to learn, faster to use, and less error-prone. However, it has been shown that the creation of powerful graphical interfaces takes up to 80% of the time required to develop an application. In our work, we seek to extend the benefits of graphical interaction to the next layer of computer user—the interface designer. Our work in this area is distinguished from other efforts by two important differences. First, while other efforts focus primarily on the design of standard user interfaces, our approach emphasizes the creation of unique and innovative interfaces by supporting, among other things, arbitrary user-designed graphical representations, direct specification of animation, and digitized sound. Second, our goal is to cater to the nonprogrammer. Thus, we address a challenging trade-off: maximizing power and flexibility in an extremely simple environment. We explore the utility of the prototype object-oriented paradigm, a high-level userinterface language, and a direct-manipulation programming environment in this context.     

四辊铝箔轧机预控参数在线整定

介绍Ф210mm/Ф500mm× 800mm四辊液压轧机厚度预控系统中采用人机界面实现参数在线调整的方法,能大大提高预控参数的控制精度,减少轧机产品的厚度误差,是厚度自动控制的一项创新.     

不锈钢复合板热疲劳性能分析

利用冷热疲劳试验机模拟分析了冷热循环对不锈钢复合板热疲劳性能的影响,并采用扫描电镜、电子探针和电子背散射衍射仪对热疲劳试样V形缺口及裂纹区域的形貌和成分进行了深入分析。结果表明,不锈钢复合板热疲劳试样经 20~550 ℃ 7 500次冷热循环后,结合界面处V形缺口区出现微裂纹,且微裂纹起裂于V形缺口尖端基层侧。随着冷热循环的继续进行,微裂纹向基层内扩展,但并非沿着结合界面处扩展,而是沿着基层侧扩展。此外,热疲劳裂纹的起裂和扩展与氧化和应力作用有关,微裂纹起裂于热疲劳试样 V 形缺口区域基层侧表层局部氧化孔洞,并在冷热循环的应力作用下向基层内扩展,同时加剧氧化。随着冷热循环的继续进行,晶界氧化逐渐加剧,导致微裂纹扩展成更为明显的裂纹。     

Alcohol consumption detection through behavioural analysis using intelligent systems

We describe in this paper a new methodology for blood alcohol content (BAC) estimation of a subject. Rather than using external devices to determine the BAC value of a subject, we perform a behaviour analysis of this subject using intelligent systems. We monitor the user’s actions in an ordinary task and label those data to various measured BAC values. The obtained data-set is then used to train learning systems to detect alcoholic consumption and perform BAC estimation. We obtain good results on a mono-user base, and lower results with multiple users. We improve the results by combining multiple classifiers and regression algorithms.     

Dynamics of fluid circulation in coupled free and heterogeneous porous domains

Fluid flow in coupled free and porous domain, particularly when the porous medium is heterogeneous, is encountered in many hydro-environmental conditions, e.g., leakage from underground pipe, combined groundwater lake-subsurface interactions. One of the most difficult problems in the study of coupled flow behaviour has been the development of a universally applicable modelling scheme for combining the flow regimes. This is because the free/porous interfacial properties (e.g., shear-stress; velocity slip) that govern the coupled flow behaviour are difficult to determine experimentally under hydro-environmental conditions. On the other hand, the implications of various forms of heterogeneity in the porous media properties can be very different on the fluid-flow behaviour. Difficulties may also arise in direct coupling of the model equations that govern the fluid flow in the individual regions (e.g., Navier-Stokes for free-flow region and the Darcy's equation for the porous flow region). Consequently, models of coupled free and porous flow for hydro-environmental conditions are not very well developed at the moment. While there are some indications that fluids in coupled free and porous domains may circulate (i.e., development of flow cells), there is a lack of appropriate 3D analysis on how heterogeneities in porous media may affect such flow patterns. In this paper, we aim to analyse how porous media heterogeneity affects the dynamics of flow circulation in the porous side of a coupled free and porous domain. For this purpose, we analyse flow patterns in several model domains made up of two porous layers with differing permeabilities. The governing model equations are discretised and solved using the standard finite volume method on a staggered cell-centred mesh. The temporal discretisation is done using the explicit method. An in-house graphical user interface (GUI) has been created specifically to aid in the visualisation of otherwise complex flow patterns. The GUI contains many post-processing options and provides a comprehensive tool for the analysis of hydrodynamics and contaminant motion (not discussed in this paper) in coupled free and porous flow domains. This GUI is described in this paper briefly. The effects of altering the aspect ratio (i.e., multi-scale) of the domain on the coupled flow pattern have also been discussed.     

Factors influencing the efficacy of an interfacial modifier for the interface in an immiscible polymer blend

The modification of the interface in immiscible polymer blends is critical in order to optimize physical properties. Despite the great commercial importance of polymer blends, many aspects of the emulsification process remain unclear In this paper, it will be shown that an emulsification curve can be used to estimate the influence of the architecture molar mass of styrene/hydrogenated butadiene block copolymer interfacial modifiers on the emulsifion of polystyrene/ethylene-propylene rubber blends under melt processing conditions. An expression for eing the critical amount of copolymer to saturate the interface, as well as aspects concerning the localisation of the modifier in the blend system will also be addressed.     

Evaluation of a haptics-based virtual reality temporal bone simulator for anatomy and surgery training

Introduction

Virtual reality simulation training may improve knowledge of anatomy and surgical skills. We evaluated a 3-dimensional, haptic, virtual reality temporal bone simulator for dissection training.

Methods

The subjects were 7 otolaryngology residents (3 training sessions each) and 7 medical students (1 training session each). The virtual reality temporal bone simulation station included a computer with software that was linked to a force-feedback hand stylus, and the system recorded performance and collisions with vital anatomic structures. Subjects performed virtual reality dissections and completed questionnaires after the training sessions.

Results

Residents and students had favorable responses to most questions of the technology acceptance model (TAM) questionnaire. The average TAM scores were above neutral for residents and medical students in all domains, and the average TAM score for residents was significantly higher for the usefulness domain and lower for the playful domain than students. The average satisfaction questionnaire for residents showed that residents had greater overall satisfaction with cadaver temporal bone dissection training than training with the virtual reality simulator or plastic temporal bone. For medical students, the average comprehension score was significantly increased from before to after training for all anatomic structures. Medical students had significantly more collisions with the dura than residents. The residents had similar mean performance scores after the first and third training sessions for all dissection procedures.

Discussion

The virtual reality temporal bone simulator provided satisfactory training for otolaryngology residents and medical students.