基于模型缩聚的θ指标损伤识别方法

为实现大型三维空间结构的损伤检测,提出了一种基于模型缩聚技术的检测方法。该方法利用有限数量的加速度传感器,得到大型三维桁架结构的自振频率和模态振型,以完成损伤的识别。数值仿真结果表明：该方法在损伤的定位识别和定量识别上能达到预期的适用性和可靠性。     

Experimental investigations of machining characteristics and removal mechanisms of advanced ceramics in high speed deep grinding

Machining characteristics and surface integrity of advanced ceramics, including alumina, alumina–titania, and yttria partially stabilized tetragonal zirconia, were studied under high speed deep grinding conditions. Material removal mechanisms involved in the grinding processes were explored. The material removal in the grinding of alumina and alumina–titania was dominated by grain dislodgement or lateral cracking along grain boundaries. The removal for zirconia was via both local micro fracture and ductile cutting. It was found that under a feed rate of 500 mm/min and for all the wheel speeds used, an increase in the wheel depth of cut (DOC) from 0.1–2 mm slightly improved the ground surface finish, but greatly prolonged the wheel life. This increase did not deepen the subsurface damage layer for the alumina and alumina–titania, but resulted in a slightly deeper damage layer for the zirconia.     

IMPROVEMENT ON FATIGUE LIFE OF ALLOY LY12CZ AFTER LASER RADIATION AND ITS DAMAGE EVOLUTION

The change of microstructure of fatigue specimens before and after laser radiation was studiedby transmission electron microscopy.The results show that the diameter of dislocation cell λtends to a constant at fatigue failure.Based on the principles of continuous damagemechanics,expressions of the fatigue damage criterion and processes of fatigue damage evolu-tion for L Y12CZ have been derived.     

冷轧工作辊摩擦不稳定分析及其抑制对策

对冷轧机工作辊由于摩擦力引起的垂直、横向振动作了定性分析，指出了它们的危害，提出了预防措施。     

限定领域智能导学系统问题生成及对话管理技术

智能导学是当前信息化教学研究的一个热点领域,将导学技术应用到难于识记并需要严格遵守的规章规程类知识领域,将极大地提高领域人员对相关知识的快速理解与掌握能力.采用面向对象的知识表示方法,提高了对通用主题和问题模板表示的灵活性.设计了基于模板的领域知识表示方法和导学问题生成方法,可实现一个主题知识生成多种问句.采用约简的有限状态转移方法,避免了对话管理中状态数量庞大的问题.最后,本文以船舶损管领域为例,将此方法运用到船舶损管训练语音导学原型系统中.系统运行良好,充分表明这种设计方法是切实可行的.     

EFFECTS OF ENTRAINED AIR MANNER ON CAVITATION DAMAGE

Early in 1953 the experiments by Peterka proved that air entrainment has effects on decreasing cavitation damage.This technology has been widely used in the release works of high dams since the inception of air entrainment in the Grand Goulee Dam in 1960.Behavior,mechanism and application of air entrainment for cavitation damage control have been investigated for over half century.However,severe cavitation damage happened due to complex mechanism of air entrainment.The effects of air entrainment are related...     

Research in the Development of Finite Element Software for Creep Damage Analysis

This paper reports the development of finite element software for creep damage analysis. Creep damage deformation and failure of high temperature structure is a serious problem for power generation and it is even more technically demanding under the current increasing demand of power and economic and sustainability pressure. This paper primarily consists of three parts： （1） the need and the justification of the development of in-house software; （2） the techniques in developing such software for creep damage analysis; （3） the validation of the finite element software conducted under plane stress, plane strain, axisymmetric, and 3 dimensional cases. This paper contributes to the computational creep damage mechanics in general.     

潜艇战场损伤评估仿真中的关键技术研究

研究了潜艇战场损伤仿真评估中的两个关键问题,在综合分析潜艇战场损伤因素的基础上,提出了基于历史数据的损伤日志知识库,并结合专家意见和损伤分析技术,定义了新的仿真数据的综合获取技术,定义和构建了仿真体系中各Agent的体系结构以及协作执行单元。仿真结果证明了数据综合获取技术和结构体定义的有效性。     

僵尸网络BotNet探讨

僵尸网络Botnet是一种攻击者利用互联网秘密建立的可以集中控制的计算机群,由于数量巨大,成为目前威胁互联网安全的一个重要因素。该文从僵尸网络的定义出发,探讨了僵尸网络的组成、分类和典型代表,分析了僵尸网络的工作过程,以及可能产生的危害,并提出相关问题的解决方法思路。     

CMOS图像传感器辐照损伤效应仿真模拟研究进展

CMOS图像传感器(CIS)工作在空间辐射或核辐射环境中遭受的辐照损伤问题备受关注。对CIS辐照损伤效应进行仿真模拟研究有助于深入揭示辐照损伤机理,进而开展抗辐射加固设计,有效提升CIS抗辐照能力。文章通过梳理国内外开展CIS辐照损伤效应仿真模拟研究方面的进展情况,结合课题组已开展的电子元器件辐照效应仿真模拟和实验研究基础,从CIS器件建模、时序驱动电路建模、辐照损伤效应建模、仿真模拟结果校验等方面探讨了CIS辐照损伤效应的仿真模拟方法,分析总结了当前CIS辐照效应仿真模拟研究中亟待解决的关键技术问题。