以磷酸为粘结剂的高铝钒土砂的研制与应用

介绍了以磷酸为粘结剂的高铝钒土砂的组成和性能及在离心铸造端盖造型上的使用方法和使用效果。实践证明，它具有很好的经济效益和社会效益。     

S—135钢板热轧工艺研究

S—135钢板是水电站用高强耐磨不锈钢板,既要求强度高、韧性好,又要求耐磨、耐蚀性强,生产难度较大。除我厂外,目前国内尚无其它厂家能够生产这种钢板。该钢板在加热轧制,冷却过程中要解决很多技术难点。我们通过采用特殊的控制轧制和控制冷却工艺,很好地解决了诸多技术难点,使S—135钢板的开发研制取得了成功。为电站用高强度耐磨不锈钢生产提供了宝贵的经验,也为控制轧制及控制冷却技术在中板生产行业的应用起到了积极的推动作用。     

高能超声处理Al-1Si合金凝固组织分析

采用高能超声处理Al-1Si合金熔体,借助金相显微镜和电子探针进行组织分析,并测定合金的熔化潜热,分析了熔体中超声空化效应和声流效应影响凝固过程的机理。结果表明,试样晶粒平均尺寸由超声处理前的94μm减小到超声处理后的34μm;合金试样的熔化吸热量由263.90J/g降低为159.81J/g,在熔体中施加高能超声显著改善了合金成分的均匀性并细化了晶粒。     

Conductor design with high-Tc superconducting Bi(Pb)—2223/Ag multifilamentary tapes

With high upper critical fields, high temperature superconductors (HTSC) have been recognised as candidate materials for coil and magnet applications. High field devices, at one time or another, when operated close to their rated limits are often faced with instability problems which normally are electrical, magnetic or mechanical in nature. The determination of stability parameters, therefore, is of interest to the conductor designer which very much assists in the processing aspect of long length production of wires and tapes. Due to the morphology of the superconductor most HTSC devices made with Bi(Pb)—2223 precursor exist in tape form. Here the determination of stability parameters (for flux-jump and cryogenic stability) for multifilamentary Bi(Pb)—2223/Ag tapes are presented. Processing parameters such as intermediate deformation and filling factors have been found to play a crucial role, not only on the critical current density of the tapes but on the stability aspect in conductor design as well.     

电荷灵敏放大器不用反馈高值电阻的新方法

本文提出了一种电荷灵敏放大器不用反馈高值电阻的新方法。对这种方法作了电路分析以及对实际电路的测量结果作了介绍。     

高能粒子辐照对零膨胀微晶玻璃光学性质和面形光学稳定性的影响

研究了高能电子，高能质子对ＶＯ２微晶玻璃辐照前后光性质和面形光学稳定性的影响，研究结果表明，高能电子辐照能引起微晶玻璃面形明显变化，且使ＶＯ２微晶玻璃强烈着色。高能质子辐照没引起面形明显变化，高能质子辐照对反射光谱特性没有影响。     

冷轧带肋钢筋现浇混凝土板开裂现象研究及探讨

本文总结了冷轧带肋钢筋在福州地区的应用情况,对现浇砼板裂缝现象进行现场调查,并探究其裂缝发生的机理,最后对高强带肋钢筋在砼楼板中的应用前景提出有益的建议和展望     

Deflections of highly inflated fabric tubes

Inflatable beams made of modern textile materials with important mechanical characteristics can be inflated at high pressure. The aim of the paper is to present experimental, analytical and numerical results on the deflections of highly inflated fabric tubes submitted to bending loads. Experiments are displayed and we show that tube behaviour looks like that of inflatable panels (Thin-Walled Struct. 40 (2002) 523–536). Equilibrium equations are once again written in the deformed state to take into account the geometrical stiffness and the following forces. The influence of the shear stress cannot be neglected and Timoshenko’s beam theory is used. A new inflatable tube theory is established and simple analytical formulas are given for a cantilever-inflated tube. Comparisons between analytical and experimental results are shown. A new inflatable finite tube element is constructed by use of algebraic operations, because the compliance matrix of the cantilever beam is not symmetric. Comparisons between experimental, analytical and numerical results prove the accuracy of this beam theory and on this new finite element for solving problems on the deflections of highly inflated tubes.     

基于VME总线的高速A／D缓冲系统的研制

本文介绍一种基于ＶＭＥ总线的高速Ａ／Ｄ缓冲系统的原理和结构。着重阐述了高速数据采集技术，高速ＦＩＦＯ缓冲技术，存储器总线切换技术，ＶＭＥ及ＰＣ／ＩＳＡ总线接口技术在本系统中的成功应用。