立式轴承压装机上料机械手设计

为了适应自动化的需要,解决原有轴承压装机压装过程中人工上料效率低,劳动强度大等问题,设计中巧妙地应用了空间凸轮机构,实现压装过程中自动上料.在分析相关技术要求和参数及现场条件的基础上,完成了立式轴承压装机上料机械手总体结构设计,设计出立式轴承压装机上料机械手.     

V-5Cr-5Ti合金的动态压缩力学性能及本构关系

利用Hopkinson压杆技术对V-5Cr-5Ti合金动态压缩力学性能进行了实验测试,获得了不同应变率下V-5Cr-5Ti合金的压缩应力—应变曲线,结果显示V-5Cr-5Ti合金具有较强的应变率敏感性。根据实验结果,确定了描述V-5Cr-5Ti合金常温动态性能本构参数,并将实验结果与计算结果进行了比较,两者吻合较好。     

Modeling of metadynamic recrystallization kinetics after hot deformation of low-alloy steel Q345B

Based on the steady-state strain measured by single-pass hot compression tests, the method by a double-pass hot compression testing was developed to measure the metadynamic-recrystallization kinetics. The metadynamic recrystallization behavior of low-alloy steel Q345B during hot compression deformation was investigated in the temperature range of 1 000–1 100 °C, the strain rate range of 0.01–0.10 s⁻¹ and the interpass time range of 0.5–50 s on a Gleeble-3500 thermo-simulation machine. The results show that metadynamic recrystallization during the interpass time can be observed. As the deformation temperature and strain rate increase, softening caused by metadynamic recrystallization is obvious. According to the data of thermo-simulation, the metadynamic recrystallization activation energy is obtained to be Q _md=100.674 kJ/mol and metadynamic recrystallization kinetics model is set up. Finally, the error analysis of metadynamic recrystallization kinetics model proves that the model has high accuracy (correlation coefficient R=0.988 6).     

Effect of fretting amplitudes on fretting wear behavior of steel wires in coal mines

Given that fretting wear causes failure in steel wires, we carried out tangential fretting wear tests of steel wires on a self-made fretting wear test rig under contact loads of 9 and 29 N and fretting amplitudes ranging from 5 to 180 μm. We observed morphologies of fretted steel wire surfaces on an S-3000N scanning electron microscope in order to analyze fretting wear mecha-nisms. The results show that the fretting regime of steel wires transforms from partial slip regime into mixed fretting regime and gross slip regime with an increase in fretting amplitudes under a given contact load. In partial slip regime, the friction coefficient has a relatively low value. Four stages can be defined in mixed fretting and gross slip regimes. The fretting wear of steel wires in-creases obviously with increases in fretting amplitudes. Fretting scars present a typical morphology of annularity, showing slight damage in partial slip regime. However, wear clearly increases in mixed fretting regime where wear mechanism is a combination of plastic deformation, abrasive wear and oxidative wear. In gross slip regime, more severe degradation is present than in the other regimes. The main fretting wear mechanisms of steel wires are abrasive wear, surface fatigue and friction oxidation.     

Longitudinal surface cracks of thin slabs

Based on the production practice of medium carbon thin slabs in the CSP plant,the reasons and influencing factors for the formation of longitudinal cracks were investigated,and some industrial measures were taken to eliminate the cracks.The results show that the efficient solutions to reduce longitudinal cracks are improving the performance of the mold powder,stabilizing the mold heat flux,and maintaining a proper taper of the mold during casting.Proper pouring temperature and secondary cooling also play...     

Numerical simulation on the microstress and microstrain of low Si-Mn-Nb dual-phase steel

According to the stress-strain curves of single-phase martensite and single-phase ferrite steels,whose compositions are similar to those of martensite and ferrite in low Si-Mn-Nb dual-phase steel,the stress-strain curve of the low Si-Mn-Nb dual-phase steel was simulated using the finite element method(FEM).The simulated result was compared with the measured one and they fit closely with each other, which proves that the FE model is correct.Based on the FE model,the microstress and microstrain of the dual...     

Decarburization rate of RH refining for ultra low carbon steel

The decarburization behaviors of ultra low carbon steel in a 210-t RH vacuum degasser were investigated under practical operating conditions.According to the apparent decarburization rate constant (KC) calculated by the carbon content in the samples taken from the hot melt in a ladle at an interval of 1-2 min,it is observed that the total decarburization reaction period in RH can be divided into the quick decarburization period and the stagnant decarburization period,which is quite different from the tradit...     

Effects of chromium on the corrosion and electrochemical behaviors of ultra high strength steels

The effects of chromium on the corrosion and the electrochemical behaviors of ultra high strength steels were studied by the salt spray test and electrochemical methods. The results show that ultra high strength steels remain martensite structures and have anodic dissolu-tion characteristic with an increase of chromium content There is no typical passive region on the polarization curves of an ultra high strength stainless steel, AerMet 100 steel, and 300M steel However, chromium improves the corrosion resistance of the stainless steel re-markably. It has the slowest corrosion rate in the salt spray test, one order of magnitude less than that of AerMet 100 and 300M steels. With the increase of chromium content, the polarization resistance becomes larger, the corrosion potential shifts towards the positive direction with a value of 545 mV, and the corrosion current density decreases in electrochemical measures in 3.5wr% NaCl solutions. Because of the higher content of chromium, the ultra high strength stainless steel has a better corrosion resistance than AerMet 100 and 300M steels.     

Hydrogen induced cracking of X80 pipeline steel

The hydrogen-induced cracking (HIC) behavior of X80 pipeline steel was studied by means of electrochemical charging, hydrogen permeation tests, tension test, and scanning electron microscopy (SEM). The experimental results indicate that the increase of charging time and charging current density or the decrease of the solution pH value leads to an increase of the hydrogen content in X80 steel, which plays a key role in the initiation and propagation of HIC. It is found that the majority of macro-inclusions w...     

Precipitation and stability of reversed austenite in 9Ni steel

A new method was used to analyze the factors affecting the precipitation of reversed austenite during tempering. The samples were kept at various tempering temperatures for 10 min and their length changes were recorded. Then, the precipitation of reversed austenite which led to the length reduction was shown by thermal expansion curves. The results show that the effects of process parameters on the precipitation of reversed austenite can be determined more accurately by this method than by X-ray diffraction...