Microstructure determination and thermal studies of n‐acryloylcarbazole/vinyl acetate copolymers

Copolymers of N‐acryloylcarbazole (A) and vinyl acetate (V) were synthesized by bulk polymerization using benzoyl peroxide (BPO) as free‐radical initiator at 65°C in different in‐feed ratios. The composition of the copolymer was determined by ¹H‐NMR spectrum. The comonomer reactivity ratios, determined by Kelen–Tudos (KT) and nonlinear error‐in‐variables (EVM) methods, were r_A= 16.75 ± 1.38, r_V = 0.015 ± 0.002, and r_A = 16.36, r_V = 0.015, respectively. Complete spectral assignments of the ¹H and ¹³C{¹H} NMR spectra of the copolymers were done by the help of distortionless enhancement by polarization transfer (DEPT) and two‐dimensional NMR techniques such as heteronuclear single quantum coherence (HSQC) and total correlation spectroscopy (TOCSY). The methine and methylene carbon resonances were found to be compositional as well as configurational sensitive. The signals obtained were broad pertaining to the restricted rotation of bulky carbazole group. The thermal stability and glass‐transition temperatures (T_g) of the copolymers were found to be dependant on polymer composition and characteristic of rotational rigidity of the polymer chain. Variation in the values of T_g with the copolymer composition was found to be in good agreement with theoretical values obtained from Johnston and Barton equations. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2720–2733, 2007     

Suppression of the α → β-nickel hydroxide transformation in concentrated alkali: Role of dissolved cations

The presence of dissolved cations such as Al and Zn in alkaline electrolyte (6 M KOH) suppresses the -nickel hydroxide transformation. The uptake of Al (10 mol%) and Zn (30 mol%) exhibited by the active material likely stabilizes the -phase. Dissolved Al is deleterious to the performance of the nickel hydroxide electrode, whereas, dissolved Zn enhances the specific discharge capacity of nickel hydroxide by approximately 25% showing that the mode of metal uptake is different in the two cases.     

α-Tocopherol alteration of soybean antiherbivory toTrichoplusia ni larvae

The antioxidant vitamin E, -tocopherol, was tested as a candidate elicitor of alterable antiherbivory in soybean plants against cabbage looper larvae. Although a nonspecific antioxidant, vitamin E proved elicitory to the involved sulfhydryl-dependent receptor-energy transducer protein in soybean plasma membrane. Effects of -tocopherol were dependent on dosage, time, and space in the plant. The observed elicited effects were all decreases in herbivory. The best negative phytochemical correlate of looper feeding was the percentage of increased total HPLC peak area of extractables from elicited as compared to nonelicited leaves. Some specific compounds, e.g., glyceollins, were quantitatively major components of the total profile of secondary metabolites.     

The influence of an intermediate MoO3 layer on the solid state reaction of cobalt oxide withγ-Al2O3

In view of the importance for Co_xO_y,-MoO₃/-Al₂O₃ hydrodesulphurization (HDS) catalysts, the reactivity of cobalt oxide layers towards cobalt aluminate formation was investigated on both MoO₃-covered and bare -Al₂O₃ substrates. Co₃O₄/MoO₃/-Al₂O₃ and Co₃O₄/-Al₂O₃ systems were prepared by vapour-deposition of MoO₃ (12 × 10¹⁵ Mo atoms/cm²) and Co (400 × 10¹⁵ Co atoms/cm²) layers onto a -Al₂O₃ substrate, followed by oxidation of the Co layer to Co₃O₄. After annealing at 800°C for 40 h, the interfacial reaction to cobalt aluminate was assessed using Rutherford backscattering spectrometry. The presence of molybdenum oxide appeared to enhance cobalt aluminate formation. The Mo atoms, which spread out over the entire cobalt-containing layer, presumably caused a high defect density, which explains the observed higher reaction rate. The amount of MoO₃ was much too low to stabilize all cobalt atoms by cobalt molybdate formation.     

Identification of nine acetylenic fatty acids, 9-hydroxystearic acid and 9,10-epoxystearic acid in the seed oil ofJodina rhombifolia hook et arn. (Santalaceae)

In addition to some usual fatty acids, the seed oil ofJodina rhombifolia (Santalaceae) contains nine acetylenic fatty acids [9-octadecynoic acid (stearolic acid) (1.1%),trans-10-heptadecen-8-ynoic acid (pyrulic acid) (20.1%), 7-hydroxy-trans-10-heptadecen-8-ynoic acid (2.3%),trans-10,16-heptadecadien-8-ynoic acid (0.7%), 7-hydroxy-trans-10,16-heptadecadien-8-ynoic acid (0.1%),trans-11-octadecen-9-ynoic acid (ximenynic acid) (20.3%), 8-hydroxy-trans-11-octadecen-9-ynoic acid (12.2%),trans-11,17-octadecadien-9-ynoic acid (1.5%), 8-hydroxy-trans-11,17-octadecadien-9-ynoic acid (1.3%), 9-hydroxystearic acid (<0.1%) and 9,10-epoxystearic acid (0.7%)]. The fatty acids have been analyzed by gas chromatography/mass spectrometry of their methyl ester and 4,4-dimethyloxazoline derivatives. The hydroxy fatty acid methyl esters have been examined also as trimethyl-silyl ethers. Furthermore, the fatty acid methyl esters (FAME) have been fractionated according to their polarity (FAME-A: nonhydroxy; FAME-B: hydroxy fatty acids) and to their degree of unsaturation (FAME-A1/A2; FAME-B1/B2) by preparative thin-layer chromatography and argentation chromatography, respectively. All of these fractions have been analyzed by ultraviolet and infrared spectroscopy, and the fractions FAME-A and FAME-B have been analyzed further by nuclear magnetic resonance (¹H,¹³C, 2D H/C, attached proton test) spectroscopy and gas chromatography/mass spectrometry. This work is dedicated to the 65th birthday of Prof. Dr. K. Pfeilsticker, Institut of Food Science, University Bonn (Germany).     

Eco-friendly electronics,based on nanocomposites of biopolyester reinforced with carbon nanotubes: a review

ABSTRACT

Fabrication of electronic materials from nanocomposite of biopolyesters reinforced with carbon nanotubes can be regarded as the effective alternative for conventional nanocomposites consisting of non-biodegradable polymers. Commercial availability of biopolyester-based nanocomposites is limited because of their high cost compared to other polymers, but the factor of their compostable nature is worthless for environmental protection. Such nanocomposites have potential applications in biodegradable sensors, EMI materials, etc. In this review, the current progress of biopolyester/CNTs nanocomposites in the field of biodegradable electronics is reviewed and also the impact of CNTs dispersion on electrical, thermal and mechanical properties of eco composites is stipulated.     

Assessment of a redox alkaline/iron-chelate absorption process for the removal of dilute hydrogen sulfide in air emissions

The oxidative absorption of hydrogen sulfide (H₂S) into a solution of ferric chelate of trans-1,2- diaminocyclohexanetetraacetate (CDTA) was studied in a counter-current laboratory column randomly packed with 15 mm plastic Ralu rings. The present investigation takes concern about the Kraft pulping situation where dilute H₂S concentrations are omnipresent in large-volume gas effluents. A fractional two-level factorial approach was instigated to determine the significance of six operating variables, namely the solution's alkalinity (pH; 8.5-10.5), the liquid mass flow rate (L;1.73-), the solution's ionic strength (I_C;0.01-), the gas mass flow rate (G;0.19-), the inlet H₂S concentration (C_H2S,0;70-430 ppm) and the initial ferric CDTA concentration (C_Fe,0;100 -). Initially, a Plackett-Burman design matrix of seven duplicated experiments revealed that pH is the leading factor controlling the H₂S conversion rate while the ionic strength and ferric CDTA concentration effects remained negligible within the factorial domain. Surface response analysis based on 11 duplicated factorial experiments plus 10 central composite trials revealed that the H₂S conversion significantly increases with liquid flow rate but decreases with growing H₂S load up. Further examination about the influence of ferric CDTA on H₂S absorption rate was set up over a broader concentration range (C_Fe,0;0- at pH of 9.5 and 10.5. It showed good potential at as H₂S conversion increased by a significant 25% for both pH values in comparison to pure alkaline solutions containing no ferric CDTA.     

The ring transformations of 1,2,3,4-diepoxybutane (2,2′-bioxirane) catalysed by various aluminosilicates

The transformations of a molecule containing two adjacent epoxide rings, 2,2-bioxirane that is, were studied over various acidic aluminosilicates (HZSM-5, HY-FAU, AlMCM-41), for the first time, In the 373–473 K temperature range, in a pulse reactor, a ring-opening–ring-enlargment reaction producing furan only occured over the zeolites and it was the predominant reaction on AlMCM-41 as well. The driving force of this transformation route is water formation via elimination from 2,2-bioxirane. Suprising is the lack of the mono- or dialdehyde, the would-be products of the cleavage of the sterically more hindered C–O bonds – an acid-catalysed reaction typical for alkyl-substituted oxiranes.     

Investigation on the early and late stage phase-separation dynamics of poly(methyl methacrylate)/poly(α-methyl styrene-co-acrylonitrile) blends through rheological and scattering functions

The phase-separation behavior of poly(methyl methacrylate)/poly(α-methyl styrene-co-acrylonitrile) (PMMA/α-MSAN) blends with two different compositions was studied by time-resolved small angle light scattering (SALS) in the spinodal decomposition (SD) regime from 160 to 210 °C. The rheological function (WLF-like equation) was introduced into the processing of light scattering data. It was found that the WLF-like equation was applicable to describe the temperature dependence of apparent diffusion coefficient D_app and the relaxation time τ of normalized scattering intensity (I(t)−I(0))/(I_m−I(0)) at the early stage of SD, as well as the relaxation time τ of maximum scattering intensity I_m and characteristic scattering vector q_m with I_m at the late stage of SD for PMMA/α-MSAN blends with two different compositions. This is in consistence with the phase-separation behavior of PMMA/SAN reported in our previous paper.