露天矿山深-浅耦合台阶爆破方法研究及应用

爆破大块率高一直是困扰国内外众多露天矿山的技术难题,银山矿露天采矿场由于采区地质条件复杂,爆破大块率高的现象尤为明显。为此,针对露天采矿场岩性复杂易产生大块的区域,基于岩石的物理力学性质,计算出千枚岩和斑岩爆破区域需增设的短孔孔位。为减少爆破大块的产生率,提出了中深孔爆破方法—深-浅耦合台阶爆破方法。在银山矿露天采矿场实施深-浅耦合台阶爆破方法后,爆破大块率得到有效控制并取得了显著的社会及经济效益。     

基于RHT模型双孔同时爆破均质岩体损伤的数值模拟

为探究双孔爆破时炮孔间距和额外自由面对爆破过程中爆破损伤的影响,基于RHT（Riedel-Hiermaier-Thoma）损伤本构建立了多组三维数值模型,利用模型损伤云图研究不同爆破条件下的岩石爆破过程,通过自定义变量—有效损伤率的变化探究炮孔周围岩石损伤的时空演化过程。结果表明：随着炮孔间距的增加,岩石有效损伤率逐渐递减,相同截面处的有效损伤率在炮孔间距最小的方案中最大,相邻炮孔间的爆破能量叠加作用随炮孔间距的增大而减弱,合适的炮孔间距可以获得更加理想的爆破效果;岩石有效损伤率随着自由面到炮孔中心处距离的增大而逐渐减小,爆破能量倾向于向自由面方向传播,额外自由面对爆破能量分布的影响随自由面与炮孔间距的增大而减弱。数值模拟结果对研究双孔爆破能量的传递法则具有一定的借鉴意义。     

Characterization of blasted austenitic stainless steel and its corrosion resistance

It is known that the corrosion resistance of stainless steel is deteriorated by blasting, but the reason for this deterioration is not clear. A blasted austenitic stainless steel plate (JIS-SUS304) has been characterized with comparison to the scraped and non-blasted specimens. The surface roughness of the blasted specimen is larger than that of materials finished with #180 paper. A martensite phase is formed in the surface layer of both blasted and scraped specimens. Compressive residual stress is generated in the blasted specimen and the maximum residual stress is formed at 50–100 μm from the surface. The corrosion potentials of the blasted specimen and subsequently solution treated specimen are lower than that of the non-blasted specimen. The passivation current densities of the blasted specimens are higher those of the non-blasted specimen. The blasted specimen and the subsequently solution treated specimen exhibit rust in 5% sodium chloride (NaCl) solution, while the non-blasted specimen and ground specimen do not rust in the solution. It is concluded that the deterioration of corrosion resistance of austenitic stainless steel through blasting is caused by the roughed morphology of the surface.     

抛丸器气力喂丸装置设计

提供了新型抛丸器气力喂丸机装置的结构、设计参数发现场应用情况。该装置长期应用于六工位半自动抛丸机。现场使用表明，气力喂丸装置适用于高效抛丸器。     

一种高效无污染合成丙酮酸乙酯的新方法

研究了由次氯酸钠和溴化钠催化氧化乳酸乙酯合成丙酮酸乙酯新工艺。并通过正交试验设计方法 ,得出最佳实验操作条件 :温度为 30℃以下 ,反应时间为 8h ,溴化钠与乳酸乙酯的摩尔比为 1∶2 ,盐酸与溴化钠的摩尔比为1∶1. 4,不采用光照 ,并由此得到丙酮酸乙酯最好收率为 82 . 86 %(文献值为 80 . 2 %) ,乳酸乙酯的转化率为10 0 %。     

掏槽法在黄麦岭磷矿掘双壁沟爆破中的应用

在黄麦岭磷矿露天开采的掘沟爆破中，根据掏槽法的机理，使用大孔径深孔掏槽，采用多排微差挤压爆破，一次形成开采所需的双壁沟，提高了掘沟效率，扩大了掏槽法的应用范围。     

Reactive rock phosphate fertilizers and soil testing for phosphorus: The effect of particle size of the rock phosphate

North Carolina rock phosphate (NCRP) (highly carbonate—substituted apatite) was ground to produce three samples with different particle size distributions. The effectiveness of these fertilizers was compared with the effectiveness of superphosphate in a field experiment and three glasshouse experiments using lateritic soils from south-western Australia. Non-reactive Queensland rock phosphate (low carbonate-substituted apatite from the Duchess deposit) was also used in the pot experiments. Bicarbonate-soluble phosphorus extracted from the soil is widely used in Western Australia to predict plant yields from previously-applied fertilizer dressings. For both field and pot experiments bicarbonate-extractable phosphorus (soil test value) was measured and related to subsequent plant yields.As calculated from the initial slope of the relationship between yield and the level of P applied, finely powdered NCRP was about 5–32% as effective as freshly-applied superphosphate in the year of application and also for two years after application in the field experiment, and for two successive crops in the three pot experiments. For both field and pot experiments, finely powdered NCRP, was at best, 1.5–2.0 times as effective as granular NCRP. Relative to freshly-applied superphosphate, the effectiveness of rock phosphates usually decreased with increasing level of application.For each of the crops in the field experiment, the relationships between yield and phosphorus content of plants (i.e. internal efficiency curves) were similar for all fertilizers. Thus the low effectiveness of the rock phosphates relative to superphosphate was solely due to much less phosphorus being taken up by plants. By contrast, in the pot experiments internal efficiency curves differed for different fertilizers. This is attributed to differences in the rate of phosphorus uptake by plant roots during the early stages of plant growth.For both field and pot experiments, soil test calibrations (the relationship between yield and soil test value) differed for rock phosphates and superphosphate. For superphosphate, soil test calibrations also differed for the three different years after the initial application of this fertilizer in the field experiment. For the second crop in the pot experiment, soil test calibrations differed for superphosphate applied at different times (before the first and the second crop). These results point out the difficulty of applying soil testing procedures to soils that have experienced different histories of fertilizer application.     

Experimental design in soap manufacturing for optimization of fuzzified process capability index

In manufacturing industries, the quality of a product depends on the combined effect of multiple input variables working singly or together and therefore attention has been given on process capability indices to shift from single to multivariate domain. In case of multivariable domain the capability to incorporate uncertainties at the time of decision making becomes necessary. Fuzzy system is introduced to take care of this requirement. In this article the process parameters of soap manufacturing industries have been analyzed. The process capability is determined using Fuzzy Inference System rule editor based on a set of justified if then statements as applicable for the process. The data has been collected in linguistic form to derive its process capability, using a set of justified rules and the effect of each factor has been determined using Design of Experiments (DoE) and analysis of variance technique (ANOVA) for improving the soap quality from perspective of its softness. This article ventures to propose a new methodology by integrating Fuzzy with DoE providing better result followed by DoE and Fuzzy Inference system in isolation.     

Joint Determination of the State Dimension and Autoregressive Order for Models with Markov Regime Switching

Abstract. This paper is concerned with the problem of joint determination of the state dimension and autoregressive order of models with Markov‐switching parameters. A model selection procedure is proposed which is based on optimization of complexity‐penalized likelihood criteria. The efficacy of the procedure is evaluated by means of Monte Carlo experiments.     

Shear Strength of Pressure Sensitive Adhesives and its Correlation to Mechanical Properties

Correlations between shear resistance and the mechanical properties of pressure sensitive adhesives are studied by measuring the deformation behaviour in the static and the dynamic shear test and determining the dynamic shear modulus of the adhesive. For polymers with low or moderate viscosities, the shear strain vs. time characteristics in a static shear test and, accordingly, the static shear strength, can be evaluated from the master curves of the dynamic shear modulus or the dynamic viscosity. The dynamic shear strength also can be calculated. These exact calculations cannot be applied to highly viscous or slightly crosslinked polymers. On the basis of the model experiments, empirical correlations between shear strength and the dynamic shear modulus are established which seem to be generally valid.