机械结构动态改进技术在电动机振动噪声防治中的应用

本文介绍了结构实验模态分析、灵敏度分析和局部结构改进分析等先进的结构动态改进技术的基本原理,并由此对Y112M-4型电动机的机座进行了计算和分析,确定出一个结构改进方案.经实际改进试验验证,这一改进可有效地抑制电动机电磁振动和电磁噪声的传递,具有明显的减振降噪作用.     

Using ion implantation to adjust the transition temperature of superconducting films

We summarize a continuing investigation into using ion implantation to alter the transition temperature of superconducting thin films. The primary motivation for the work presented here was to study the feasibility of using magnetic ion doping to replace the bi-layer T_c control process currently used for certain cryogenic detector applications at National Institute for Standards and Technology. The results from work with various ion species implanted into aluminum, molybdenum, titanium and tungsten host films are presented.     

超临界萃取装置高压快开密封结构改进设计

对普遍采用的以橡胶O形环作为自紧密封件的高压快开密封装置密封部位的结构进行了改进,彻底解决了橡胶O形环在卸压后发生膨胀,将筒体端部法兰与密封盖卡死的问题。开发出了1种新的组合密封环,该密封环可广泛用于超临界萃取装置上。     

主跨348m+348m三塔单索面PC梁斜拉桥

宜昌市夷陵长江大桥采用三塔斜拉桥，总体布置为(128．08 348 348 120．35)m。介绍了该桥的合理性及结构特点。     

铁路桥梁横向振动模拟及适应快速行车结构型式的研究

针对铁路提速后出现的上承式简支钢板梁桥跨中横向振幅过大的问题,以羊楼司桥(L=32m单跨上承式简支钢板梁桥)为例进行实桥检测和数值模拟,建立车辆、线路、桥梁三者的联合模型,考虑轮轨接触力,应用MSC/DYTRAN大型结构分析程序进行车线桥动力相互作用的仿真分析。研究揭示我国用量最多的C62型货车以70∽80km/h的速度空载通过时,该跨度的钢板梁桥发生横向谐振的机理。此外,用该方法对32m跨长的组合梁结构进行桥梁动力特性及列车走行性分析,表明该结构满足提速货车和高速电动旅客列车走行的要求。研究结果对我国高速铁路桥梁建设和既有桥梁的改造具有积极意义。     

旋转导向钻井偏心稳定器横向振动研究

旋转导向钻井偏心稳定器横向振动研究是国家863“可控(闭环)三维轨迹钻井技术”课题研究的部分内容。选取偏心稳定器的心轴作为研究对象,以偏心稳定器心轴连续梁系统的横向振动模型受力分析为基础,根据课题研究中所设计的心轴结构形式,建立了与实际情况较为接近的三铰支点的连续梁系统横向振动方程;并分析了偏心稳定器横向振动对钻井工具和钻具系统的影响,为合理进行心轴设计以及偏心稳定器样机在现场的正确使用和钻井参数的合理选择,提供了科学的理论依据和实用的计算方法。计算实例表明,当钻压范围选择在80~250kN时,215.9mm井眼钻进中的确存在19~20、61~63、162~163r/min前三阶横向共振转速区间,因此在选择钻井参数时应通过钻压与转速的配合,尽可能避开横向共振转速,以保证下部钻具组合系统及作业安全。     

Surface segregation studied by low-energy ion scattering: experiment and numerical simulation

The changes in surface composition of metallic alloys caused by segregation can be very efficiently studied by low-energy ion scattering (LEIS) due to the specific surface sensitivity of this technique. Investigations of single-crystal surfaces of ordered alloys are of particular interest because they provide the possibility to investigate the interplay between segregation effects and the order-disorder phase transition when passing through the transition temperature. Exemplifying these effects for bimetallic alloys we consider in particular the CuAu-system.For the quantitative interpretation of energy and angle resolved LEIS intensity distributions we compare experimental results with those from numerical simulations using the MARLOWE code which we extended with a detailed trajectory analysis. This allows us to apply various discrimination criteria, such as number of collisions, distance of closest approach, identification of the scattering crystal layer, total path length, etc. On this basis structural effects, ion survival probabilities and the influence of thermal vibrations can be studied.We demonstrate this potential by using CuAu(1 0 0) as a special example. The scattering potential parameters were calibrated with elemental single crystals of known structures and the anisotropic Debye temperatures taken from the literature showed good agreement, neutralization was of minor importance in this case. Our procedure could be successfully used for the quantitative analysis of the composition of the first and second layer as a function of temperature. These results are in good agreement with theoretical predictions.     

Influence of ion bombardment on the properties and microstructure of unbalanced magnetron deposited niobium coatings

The effect of the ion bombardment to unbalanced magnetron deposited, approximately 1.5 and 4.5 μm thick, Nb coatings have been investigated as the bias voltage was varied from U_B=−75 to −150 V. Increasing bias voltage increased the hardness of the coating from 4.5 to 8.0 GPa. This was associated with residual stress and Ar incorporation into the Nb lattice. Strong {110} texture developed in the samples deposited at low bias voltages, while beyond U_B=−100 V a {111} texture became dominant. However, strong {111} texture was observed only with the thicker 3Nb coatings. Secondary electron microscopy investigation of the coating topography showed fewer defects in the thicker coatings. All coatings exhibited good corrosion resistance, with the thicker coatings clearly outperforming the thinner ones. Excessive bias voltages (U_B=−150 V) was found to lead to poor adhesion and loss of corrosion resistance.     

单膛石灰竖窑的改造

我厂竖窑容积为250m^3，设计利用系数为0．85t/(m^3．d)。随烧结产量的不断增加，石灰产量已不能满足烧结生产的需要。为了提高石灰产量，进行了扩容改造，容积由原来250m^3增加到298m^3，并针对目前生产实际提出下一步改造设想。