Monolayer behavior of calix-4-resorcinarenes and their surfactant complexes

We describe within this paper a series of calix-4-resorcinarenes along with their complexes with tetraalkylammonium surfactants and their behavior in Langmuir monolayers. Calix‐4‐resorcinarenes were synthesized containing both undecyl and phenyl sidechains and then modified using Mannich reactions to incorporate neutral, cationic or anionic groups in the 2‐positions of the resorcinol unit. In the cases of resorcinarenes modified with four sulfonate groups, mixing with long chain dialkyl dimethyl ammonium surfactants led to the formation of 1:4 complexes. These various materials were spread as Langmuir monolayers and their behavior upon compression measured. Long chain substituted resorcinarenes gave more stable monolayers than their short chain analogues. The incorporation of long chain surfactants led to large increases in surface area, demonstrating that both resorcinarenes and surfactant are located at the water surface, except for one system where a bilayer structure is potentially formed.     

Use of CaCl2 modified bentonite for removal of Congo red dye from aqueous solutions

CaCl₂ modified bentonite (BCa²⁺), a clean and cost-effective adsorbent with a basal spacing of 15.43 Å, was prepared for the removal of Congo red dye from water. It was effective for the removal of Congo red with a high adsorption capacity, and the adsorption was favored over a broad pH range (5-10). The pseudo-second-order kinetic model provided the best correlation of the experimental data. Adsorption isotherms indicated that sorption took place at specific homogeneous sites within the adsorbent. Furthermore, BCa²⁺ showed higher sorption capacity compared with other common materials used as adsorbents for Congo red dye. The results showed that BCa²⁺ could be employed as a low-cost material for the removal of Congo red from aqueous solutions.     

Removal of Ni(II), Cd(II), and Pb(II) from a ternary aqueous solution by amino functionalized mesoporous and nano mesoporous silica

In the present study, the application for the removal of Ni(II), Cd(II) and Pb(II) ions from aqueous solution by using mesoporous silica materials, namely, MCM-41, nanoparticle of MCM-41, NH₂-MCM-41 (amino functionalized MCM-41) and nano NH₂-MCM-41 was investigated. Suitable adsorbents preparation techniques were developed in the laboratory. The effects of the solution pH, metal ion concentrations, adsorbent dosages, and contact time were studied. It was found that NH₂-MCM-41 showed the highest uptake for metal ions in aqueous solution. The results indicated that the adsorption of Ni(II), Cd(II) and Pb(II) ions on the surface of the adsorbent was increased with increasing solution pH. The experimental data were analyzed using the Langmuir and Freundlich equations. Correlation coefficients were determined by analyzing each isotherm. It was found that the Langmuir equation showed better correlation with the experimental data than the Freundlich. According to the parameters of the Langmuir isotherm, the maximum adsorption capacity of NH₂-MCM-41 for Ni(II), Cd(II) and Pb(II) was found to be 12.36, 18.25 and 57.74 mg/g, respectively. The kinetic data of adsorption reactions and the evaluation of adsorption equilibrium parameters were described by pseudo-first-order and pseudo-second-order equations. The synthesized solid sorbents were characterized by Fourier transform infrared (FT-IR) spectrometry, X-ray diffraction (XRD), scanning electron microscopy (SEM) and nitrogen sorption measurements.     

Adsorption of p-chlorophenol from aqueous solutions on bentonite and perlite

The adsorption of p-chlorophenol (p-CP) from aqueous solutions on bentonite and perlite was studied. These materials are available in large quantities in Bulgaria. Model solutions of various concentrations (1–50 mg dm⁻³) were shaken with certain amounts of adsorbent to determine the adsorption capacity of p-CP on bentonite and perlite as well. The influence of several individual variables (initial adsorbate concentration, adsorbent mass) on the rate of uptake of the studied compound on the adsorbent was determined by carrying out experiments at different contact times using the batch adsorber vessel designed according to the standard tank configuration. Rapid adsorption was observed 20–30 min after the beginning for every experiment. After that, the concentration of p-CP in the liquid phase remained constant. The adsorption equilibrium of p-CP on bentonite and perlite was described by the Langmuir and the Freundlich models. A higher adsorption capacity was observed for bentonite (10.63 mg g⁻¹) compared to that for perlite (5.84 mg g⁻¹).     

Pressure–composition isotherms in the Mg2Ni–H2 system

A relatively pure Mg₂Ni intermetallic compound was prepared by partial melting and sintering. Absorption and desorption pressure–composition isotherms for the Mg₂Ni–H₂ system were obtained. The relationships between the equilibrium plateau pressure (P_eq) and the temperature were

and

The procedure to obtain the pressure–composition isotherms was explained and a method to calculate the composition for pressure–composition isotherms (“the summation method”) was also suggested.     

Adsorption of Polycyclic Aromatic Hydrocarbons in Aged Harbor Sediments

Polycyclic aromatic hydrocarbons (PAHs) are a group of hydrophobic organic contaminants which have low aqueous solubilities and are common pollutants in harbor sediments. Adsorption and desorption isotherms for PAHs are conducted to study the abiotic sorption of PAHs in uncontaminated harbor sediments in contact with the natural overlaying water. Representative 2-, 3-, and 4-ring PAHs are used to obtain PAH adsorption/desorption data. Linear adsorption onto sediment is obtained for the following PAHs: Naphthalene and 2-methyl naphthalene (2 ring), acenaphthene, anthracene, and phenanthrene (3 ring), and fluoranthene and pyrene (4 ring). Linear adsorption is followed by a significant hysteresis in desorption from sediment, due to strong retention by the aged sediment organic carbon. Sediment organic carbon–water partition coefficients (log?Koc) for the seven PAHs range from 2.49 to 4.63. Based on the sorption data for these representative PAHs, sediment organic carbon–water partition coefficients may be predicted for other PAH compounds, particularly the less soluble and the more hydrophobic PAHs (5 or more rings).     

ADSORPTION,KINETICS, AND EQUILIBRIUM STUDIES ON REMOVAL OF 4,4-DDT FROM AQUEOUS SOLUTIONS USING LOW-COST ADSORBENTS

The removal of a chlorinated pesticide (4,4-DDT) from aqueous solutions by a batch adsorption technique using different low-cost adsorbents was investigated. Two adsorbents, wood sawdust (A) and cork wastes (B), were used to determine adsorption efficiency. The influence of the adsorbent particle size and the organic matter of water (humic acids) on the removal process was studied. The obtained results were compared to those obtained with a commercial powdered activated carbon (PAC, F400, Chemviron) (C). Kinetic studies were performed to understand the mechanistic steps of the adsorption process. The rate of the adsorption kinetics of 4,4-DDT on the low-cost adsorbents was found best fitted with a pseudo-second-order kinetic model. This is in contrast to the rate of the adsorption kinetics of the PAC F400, which was best fitted with the Lagergren model. The application of the Morris-Weber equation showed that the adsorption process of 4,4-DDT on these adsorbents was complex. Both the adsorption on the surface and the intraparticle diffusion were the rate-controlling mechanisms. Langmuir and Freundlich adsorption isotherms were applicable to the adsorption process and their constants were evaluated. The adsorption capacity (q_m) calculated from the Langmuir isotherm (69.44 mg·g^?1, 19.08 mg·g^?1, and 163.90 mg·g^?1, respectively, for A, B, and C) showed that the process is highly particle size dependent, that the organic matter influenced the adsorption process negatively, and that wood sawdust is the most effective adsorbent for the removal of 4,4-DDT from aqueous solutions. The adsorbents studied exhibited a possible application in water decontamination, as well as in treatment of industrial and agricultural waste waters.     

Advanced phosphorus removal from membrane filtrates by adsorption on activated aluminium oxide and granulated ferric hydroxide

The advanced phosphorus (P) removal by adsorption was studied for its suitability as a post-treatment step for membrane bioreactor (MBR) effluents low in P concentration and particle content. Two commercial adsorbents, granulated ferric hydroxide (GFH) and activated aluminium oxide (AA), were studied in batch tests and lab-scale filter tests for P adsorption in MBR filtrates. GFH showed a higher maximum capacity for phosphate and a higher affinity at low P concentrations compared to AA. Competition by inorganic ions was negligible for both adsorbents at the original pH (8.2). When equilibrium P concentrations exceeded 2 mg L(-1) in the spiked MBR filtrates, a precipitation of calcium phosphates occurred additionally to adsorption. During column studies the effluent criteria of 50 microgL(-1) P was reached after a throughput of 8000 bed volumes for GFH and 4000 for AA. Dissolved organic carbon appears to be the strongest competitor for adsorption sites. A partial regeneration and reloading of both adsorbents could be achieved by the use of sodium hydroxide.     

Molecular dynamic simulation of carbon dioxide,methane, and nitrogen adsorption on Faujasite zeolite

Removing impurities such as carbon dioxide and nitrogen from natural gas is a technical challenge and one of the major concerns in natural gas treatment process. In this study, adsorption of CH₄, N₂, and CO₂ on the Faujasite(FAU) zeolite has been studied using molecular dynamics simulation at temperatures of 293, 308, and 323 K and pressures up to 1 MPa. COMPASS force field was used to model the interactions between zeolite and guest molecules. Ewald and atom-bas...