Coupling control on pillar stress concentration and surface cracks in shallow multi-seam mining

In order to ensure safe mining and reduce surface damage in shallow multi-seam mining, the failure characteristics of interburden strata with different coal pillars offset distances between pillars in the upper and lower seams, the distribution characteristics of stress concentration in coal pillars, and the development characteristics of stratum cracks and subsidence were investigated by physical and UDEC2 D simulation. Meanwhile, the effect of different coal pillar offset distances on stress concentration of coal pillar and development of stratum cracks were studied. Based on those results, a formula for safe mining and reducing surface damage was established, which provided a theoretical basis for safe and environmentally friendly mining in shallow multi-seam. According to the results, the optimal coal pillar offset distance(the side to side horizontal distance of the upper and lower coal pillars) between the upper and lower coal seams was developed to reduce the stress concentration of coal pillars and surface damage.The results of this study have been applied in Ningtiaota coal mine and have achieved good results in safe and environmentally friendly mining.     

CO2体积分数对燃煤细颗粒物在水汽环境中凝结长大的影响

为研究燃煤烟气中CO₂体积分数对细颗粒物在水汽环境中凝结长大效果的影响,建立了计算模型并搭建了实验平台,分别从理论计算和实验研究两方面探讨了CO₂体积分数对细颗粒物凝结长大效果的影响。结果表明:随着CO₂体积分数升高,混合烟气的热、质扩散系数均降低,生长管内平均过饱和度增加,细颗粒物长大效果明显;管壁温度越高,随着CO₂体积分数的提高,细颗粒物粒径越大。     

高流速含沙浑水体流变特性试验研究

加速行进中的洪水具有高含沙、高流速和粗粒径的特点,而针对洪水的流变特性研究关注点多为高含沙量,忽略了高流速即高剪切速率的特点。以黄河下游泥沙为研究对象,系统地研究了高流速剪切条件下含沙量、剪切模式、温度和盐度对流变特性的影响。结果表明,在高流速剪切条件下（剪切速率≥ 1200 s-1,对应线性流速为3.6 m/s）,含沙量在106.64 ~ 957.83 kg/m3范围内的浑水体符合牛顿流体的应力本构关系,不存在屈服应力,表观黏度与含沙量呈指数关系。温度降低并未改变浑水体的流变特性,但会使其表观黏度增加,且温度越低黏度增幅越大,浑水体黏度增大梯度约为等温度清水的数倍至十几倍。盐度变化对该测试浑水体的表观黏度和流变特性影响甚微,可忽略不计。本研究结果可为高流速水流挟沙和远距离输沙研究提供理论参考。     

脱硫废水旋转喷雾蒸发特性实验研究

脱硫废水旋转喷雾干燥技术是一种利用热烟气蒸发脱硫废水的零排放技术。开展了不同悬浮物（SS）含量的脱硫废水原水以及经浓缩的高盐废水的蒸发实验,采用可视化手段观察了脱硫废水在干燥塔内的蒸发特性,考察了脱硫废水喷雾蒸发过程中停留时间、进口烟气温度、气液比对蒸发特性的影响。结果表明,旋转喷雾蒸发工艺对高盐、高SS含量等复杂脱硫废水组分具有较佳的适应性;脱硫废水从旋转雾化器喷出后迅速蒸发,主蒸发区在雾化盘下方0.75~1.00 m区域内;随后是蒸发析出的未干盐分及未完全蒸发的废水液滴进一步蒸干至含水率低于2 %;烟气在喷雾干燥塔内的停留时间需要维持在20 s以上才能保证塔出口灰分含水率低于2 %;入口烟气温度越高,其塔底及塔出口的灰分含水率越低,在气液比为12 000 m³/m³（标准状态）的废水工况下,入口烟温为280 ℃时已经难以保证废水液滴良好蒸发;在入口烟气温度为340 ℃、气液比大于10 000 m³/m³（标准状态）时,塔底灰分含水率小于2%,蒸发效果良好。     

Potential of Silver Nanoparticles in Overcoming the Intrinsic Resistance of Pseudomonas aeruginosa to Secondary Metabolites from Carnivorous Plants

Carnivorous plants are exemplary natural sources of secondary metabolites with biological activity. However, the therapeutic antimicrobial potential of these compounds is limited due to intrinsic resistance of selected bacterial pathogens, among which Pseudomonas aeruginosa represents an extreme example. The objective of the study was to overcome the intrinsic resistance of P. aeruginosa by combining silver nanoparticles (AgNPs) with secondary metabolites from selected carnivorous plant species. We employed the broth microdilution method, the checkerboard titration technique and comprehensive phytochemical analyses to define interactions between nanoparticles and active compounds from carnivorous plants. It has been confirmed that P. aeruginosa is resistant to a broad range of secondary metabolites from carnivorous plants, i.e., naphthoquinones, flavonoids, phenolic acids (MBC = 512 µg mL⁻¹) and only weakly sensitive to their mixtures, i.e., extracts and extracts’ fractions. However, it was shown that the antimicrobial activity of extracts and fractions with a significant level of naphthoquinone (plumbagin) was significantly enhanced by AgNPs. Our studies clearly demonstrated a crucial role of naphthoquinones in AgNPs and extract interaction, as well as depicted the potential of AgNPs to restore the bactericidal activity of naphthoquinones towards P. aeruginosa. Our findings indicate the significant potential of nanoparticles to modulate the activity of selected secondary metabolites and revisit their antimicrobial potential towards human pathogenic bacteria.     

铜冶炼渣尾矿综合利用现状及研究

铜冶炼炉渣含有大量的有价金属元素,经过选矿工艺处理后,大部分铜被回收,选出的渣精矿返回熔炼炉,渣尾矿外售至水泥厂,尾矿中有价金属仍存在较大利用价值,在现有工艺流程后增加磁选工艺,磁选后的铁精粉用作炼钢配料,尾矿外售。主要介绍了熔炼渣及尾矿成分,现有工艺尾矿处理方式,新工艺的应用及实践。     

伊利石在铝酸钠溶液中的反应脱硅过程研究

为了更清楚地了解伊利石在拜耳法溶出过程中的反应行为，本文对伊利石在合成铝酸钠溶液中的溶出动力学进行了研究，测得其活化能为114，73kJ/mol。并研究了溶液苛性碱浓度对伊利石的反应速率的影响；添加石灰可以有效的增加伊利石的反应率，提高脱硅效率。为拜耳法生产氧化铝的脱硅过程及防止结疤提供理论依据。     

Sn-Ag-Cu表面贴装元件的水清洗技术

采用SMT450-LD全自动SMT水清洗系统对模拟试件和贴装有片式电阻的PCB板表面残留物采用水基清洗剂清洗。结果表明，用Sn—Ag-Cu免清洗焊膏贴装在FR4基板上的片式电阻，焊后采用水基清洗剂清洗，表面残留物离子浓度为1．9μg/cm^2，达到美国军用标准MIL—STD-2000小于5．7μg／cm^2的规定。清洗过程中参数的设置，如清洗温度，清洗时间会对清洗效果产生较大影响。     

CNG储气瓶的金属磁记忆检测

使用金属磁记忆检测方法和超声方法对在役的七组公交车CNG高压储气瓶组进行了检测,并对比分析了两种方法的检测结果。结果表明,金属磁记忆方法检测到的可疑区域涵盖了超声检测到的缺陷区域,因此用磁记忆方法检测高压储气瓶,有较高的可靠性和高效性。     

氢及缺口状态对40CrNiMo钢断裂强度的影响

通过对４０ＣｒＮｉＭｏ光滑与三种不同缺口状态的试样进行试验发现，氢对材料强度的影响与外加应变速率的大小有关。在空气中试验，缺口状态对材料断裂强度几乎无影响；而在氢气中试验，则发现缺口根部半径Ｒ的变化对材料断裂强度影响极大；当缺口根部半径一定，仅改变外径Ｄ或缺口处最小直径ｄ所得两种缺口状态对缺口强度的影响不大。