不同活化剂对石油焦基活性炭孔结构的影响

以石油焦为原料 ,Na OH,KOH和 Na2 CO3 为活化剂制备活性炭 ,采用氮气吸附考察了不同活化剂对活性炭的比表面积、中孔和微孔孔径分布、孔容积及平均孔径等孔结构的影响 .结果表明 :KOH活化制备的活性炭包含 1 nm的微孔和 4nm的中孔 ,总孔容 0 .648cm3 /g,比表面积大 ;Na OH制备的活性炭以 1 nm的微孔为主 ,占总孔容 ( 0 .1 65 cm3 /g)的 98% ,平均孔径 1 .83nm;Na2 CO3 制备的活性炭以 4nm的中孔为主 ,占总孔容 ( 0 .1 43cm3 /g)的 68.5 % ,平均孔径 3.42 nm,比表面积小 .3种样品的孔径都呈现出多峰分布特征 .KOH和 Na2 CO3 活化制备的活性炭的 N2 吸附脱附曲线属于 型 ,Na OH活化制备的活性炭吸附脱附曲线属于 型 .     

Structure development in amorphous starch as revealed by X‐ray scattering: Influence of the network structure and water content

The evolution of the amorphous structure of starch was characterized during the drying process by real‐time X‐ray wide‐angle scattering. The X‐ray diffractograms of injection‐molded starch show two superposed, rather broad, scattering maxima indicative of noncrystalline structures. The location of the two peaks has been associated to disordered starch single helices. A third maximum that arises upon drying the material in vacuum is associated to the scattering emerging from regions containing double helices. A model for the starch network is proposed, assuming a primary and a secondary component. The wider, temperature stable component appearing first, is correlated to the entanglement network of the melt. The narrower network component, which is created later, at lower temperature (secondary network), is explained by the formation of double helix regions that densify the wider primary network. The secondary network is increased strongly by the drying process. X‐ray experiments performed during the penetration of water, provoking a higher molecular mobility, reveal a better‐packed helical structure that becomes the precursor of a double helix crystalline formation. When temperature increases, the secondary network is dissolved and water molecules arrange themselves in better‐organized crystals as strongly bound crystal water. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1880–1886, 2006     

An evaluation of the performance of an automated procedure for comparative modelling of protein tertiary structure

A 3-D model of a protein can be constructed from its amino acidsequence and the 3-D structures of one or more homologues byannealing three sets of fragments: the structurally conservedregions, structurally variable regions and the side chains.The method encoded in the computer program COMPOSER was assessedby generating 3-D models of eight proteins whose crystal structuresare already known and for which 3-D structures of homologuesare available. In the structurally conserved regions, differencesbetween modelled and X-ray structures are smaller than the differencesbetween the X-ray structures of the modelled protein and thehomologues used to build the model. When several homologuesare used, the contributions of the known structures are weighted,preferably by the square of sequence similarity; this is especiallyimportant when the similarities of the homologues to the modelledstructure differ greatly. The ‘collar’ extensionapproach, in which a similar region of different length in ahomologue is used to extend the framework, can result in a moreaccurate model. If known homologues comprise more than one relatedgroup of proteins and they are both distantly related to theunknown, then alignment of the sequence to be modelled witheach group of homologues facilitates identification of structurallyconserved regions of the unknown and leads to an improved model.Models have root mean square differences (r.m.s.d.s) with thestructures defined by X-ray analysis of between 0.73 and 1.56Å for all C atoms, for seven of the eight models. Forthe model of mucor pepsin, where the closest homologue has 33%sequence identity and 20% of the residues are in structurallyvariable regions, the r.m.s.d. for the framework region is 1.71Å and the r.m.s.d. for all C atoms is 3.47 Â.     

New catalyst systems for the polymerization of acetylene

The catalytic activities of WCI₆Ph₄Sn, MoCl₅Ph₄Sn and tetrabenzyltitanium were examined in the polymerization of acetylene. The structure, morphology and electrical conductivity of the doped and non doped polyacetylene were also studied.     

Platinum particle size effect on the oxidative dehydrogenation of aqueous ethanol

The effect of the platinum particle size was investigated for the catalytic oxidative dehydrogenation of aqueous ethanol to ethanal at a temperature of 303 K, an ethanol concentration of 260 mol m^–3, a partial oxygen pressure 60 kPa, a pH of 9, and an ethanal and ethanoate concentration of 20 mol m^–3. A particle size effect on the turnover frequency was observed but only for particle sizes smaller than 2 nm. Hence, the reaction shows a limited structure sensitivity.     

COMPUTER SIMULATION OF HYDRODEMETALLATION IN FIXED-BED REACTORS

An isothermal model for hydrodemetallation (HDM) of crude oils in catalytic fixed-bed reactors is proposed. This model involves a consecutive reaction mechanism, which is capable of accounting for particle deposit profiles with interior maxima. Consistent with the fact that HDM catalysts are conglomerates formed by precipitation, the porous catalyst itself is modeled as randomly overlapping spheres of equal size. The metal is deposited as growing metal sulfide crystallites on the inner surface of the catalyst. These crystallites originate from a certain number of randomly scattered nuclei and increase in size as the deposition proceeds. The random sphere model for the catalyst and the deposit provides the changes in the catalyst pore structure—local porosity and surface area.

The mass transport within the domain of the particle is due to restricted liquid diffusion, since the diameter of the metal bearing compound (porphyrin) and the intermediate are comparable to the pore size. The diffusion restrictions taken into account are the enhanced drag imposed on a molecule by adjacent pore walls and steric partitioning.

Since the deposition process is much slower than diffusion and reaction, the pseudo-steady-state assumption can be justified. The equations of conservation for mass are solved by orthogonal collocation on finite elements. Based on this solution technique a computer simulation program of HDM is designed that allows two modes of operation: constant temperature and constant conversion. The simulation program “SIMULA” is highly flexible with regard to reaction kinetics, catalyst structure, reactor design, and operating conditions. In comparison to a base case with uniform activity, the effect of intraparticle (radial) and bed (axial) activity profiles on the conversion rate is discussed. For the case investigated, a radial distribution of activity higher at the center of the particle than at the edge can increase catalyst life by 25%, but axial distribution was less successful.     

Aspects of gasification and structure in cokes from coals

Cokes were prepared from nine coals of different rank and characterized by surface area measurement, reactivity to carbon dioxide at 1473K and Raman-laser spectroscopy. Rates of gasification of cokes on a unit surlface area basis (K¹ = g m^?2 min^?1) decreased with increasing rank of parent coal based on maximum oil reflectances. However rates of gasification could not be related to coke structure as measured by Raman-laser spectroscopy.     

氧化铝上吸附平衡与动力学的分形特性

在实验测定氧化铝吸附氮气的平衡和动力学过程的基础上 ,由平衡数据得到分形维数 ,对动力学结果分别用欧氏几何和分形几何的动力学模型进行处理 ,比较两种方法得到的扩散系数之间的差别。结果表明 :粉状氧化铝的分形维数为 2 .12 ;采用分形动力学模型得到的扩散系数同欧氏几何扩散模型的结果不一样 ,扩散系数不随浓度的变化而改变 ;而欧氏几何扩散模型中的扩散系数随浓度变化发生改变 ,且变化符合Darken关系     

Phase transitions of canola oil sediment

Canola sediment was obtained from an industrial filter cake by solvent extraction. When heated in the differential scanning calorimeter (DSC) (5–100°C), the sediment exhibited a single narrow melting peak at around 74.8°C. No solid-state polymorphic transformation of the material could be detected over this temperature range. The X-ray powder diffraction pattern of canola sediment resembled waxes from other sources with an orthorhombic unit cell. The phase transition behavior of canola sediment in oil was studied by both DSC and polarizing microscopy. With increasing ratio of oil/sediment, a reduction in both melting temperature and transition enthalpy was observed. The shape of the supercooling curve resembled that of the melting curve. The induction time was determined by spectrophotometry and was used to calculate the interfacial free energyσ between sediment and oil; σ=4.71 erg/cm². The effect of temperature and sediment concentration on the clouding time of canola oil was studied; the clouding time was the shortest at 5°C.     

An alignment-free fingerprint bio-cryptosystem based on modified Voronoi neighbor structures

Bio-cryptography is an emerging security technology which combines cryptography with biometrics. A good bio-cryptosystem is required to protect the privacy of the relevant biometric data as well as achieving high recognition accuracy. Fingerprints have been widely used in bio-cryptosystem design. However, fingerprint uncertainty caused by distortion and rotation during the image capturing process makes it difficult to achieve a high recognition rate in most bio-cryptographic systems. Moreover, most existing bio-cryptosystems rely on the accurate detection of singular points for fingerprint image pre-alignment, which is very hard to achieve, and the image rotation transformation during the alignment process can cause significant singular point deviation and minutiae changes. In this paper, by taking full advantage of local Voronoi neighbor structures (VNSs), e.g. local structural stability and distortion insensitivity, we propose an alignment-free bio-cryptosystem based on fixed-length bit-string representations extracted from modified VNSs, which are rotation- and translation-invariant and distortion robust. The proposed alignment-free bio-cryptosystem is able to provide strong security while achieving good recognition performance. Experimental results in comparison with most existing alignment-free bio-cryptosystems using the publicly-available databases show the validity of the proposed scheme.